Remove trailing whitespace

Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h

 
   // set the radius for the calibration probe points - max 0.8 * DELTA_PRINTABLE_RADIUS if DELTA_AUTO_CALIBRATION enabled
   #define DELTA_CALIBRATION_RADIUS (DELTA_PRINTABLE_RADIUS - 17) // mm
-  
+
   // G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results)
   #define DELTA_AUTO_CALIBRATION
   #if ENABLED(DELTA_AUTO_CALIBRATION)

Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h

 
   // set the radius for the calibration probe points - max 0.8 * DELTA_PRINTABLE_RADIUS if DELTA_AUTO_CALIBRATION enabled
   #define DELTA_CALIBRATION_RADIUS (DELTA_PRINTABLE_RADIUS - 17) // mm
-  
+
   // G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results)
   //#define DELTA_AUTO_CALIBRATION
   #if ENABLED(DELTA_AUTO_CALIBRATION)

Marlin/example_configurations/delta/generic/Configuration.h

 
   // set the radius for the calibration probe points - max 0.8 * DELTA_PRINTABLE_RADIUS if DELTA_AUTO_CALIBRATION enabled
   #define DELTA_CALIBRATION_RADIUS (DELTA_PRINTABLE_RADIUS - 28) // mm
-  
+
   // G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results)
   //#define DELTA_AUTO_CALIBRATION
   #if ENABLED(DELTA_AUTO_CALIBRATION)

Marlin/example_configurations/delta/kossel_mini/Configuration.h

 
   // set the radius for the calibration probe points - max 0.8 * DELTA_PRINTABLE_RADIUS if DELTA_AUTO_CALIBRATION enabled
   #define DELTA_CALIBRATION_RADIUS (DELTA_PRINTABLE_RADIUS - 18) // mm
-  
+
   // G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results)
   //#define DELTA_AUTO_CALIBRATION
   #if ENABLED(DELTA_AUTO_CALIBRATION)

Marlin/example_configurations/delta/kossel_pro/Configuration.h

 
   // set the radius for the calibration probe points - max 0.8 * DELTA_PRINTABLE_RADIUS if DELTA_AUTO_CALIBRATION enabled
   #define DELTA_CALIBRATION_RADIUS (DELTA_PRINTABLE_RADIUS - 25.4) // mm
-  
+
   // G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results)
   //#define DELTA_AUTO_CALIBRATION
   #if ENABLED(DELTA_AUTO_CALIBRATION)

Marlin/example_configurations/delta/kossel_xl/Configuration.h

 
   // set the radius for the calibration probe points - max 0.8 * DELTA_PRINTABLE_RADIUS if DELTA_AUTO_CALIBRATION enabled
   #define DELTA_CALIBRATION_RADIUS (DELTA_PRINTABLE_RADIUS - 28) // mm
-  
+
   // G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results)
   //#define DELTA_AUTO_CALIBRATION
   #if ENABLED(DELTA_AUTO_CALIBRATION)

Marlin/ubl_motion.cpp

         if (y != start[Y_AXIS]) {
           if (!inf_normalized_flag) {
 
-            //on_axis_distance = y - start[Y_AXIS];                               
+            //on_axis_distance = y - start[Y_AXIS];
             on_axis_distance = use_x_dist ? x - start[X_AXIS] : y - start[Y_AXIS];
 
             //on_axis_distance = use_x_dist ? next_mesh_line_x - start[X_AXIS] : y - start[Y_AXIS];
             //on_axis_distance = use_x_dist ? next_mesh_line_x - start[X_AXIS] : y - start[Y_AXIS];
             //on_axis_distance = use_x_dist ? x - start[X_AXIS] : next_mesh_line_y - start[Y_AXIS];
 
-            e_position = start[E_AXIS] + on_axis_distance * e_normalized_dist;  
+            e_position = start[E_AXIS] + on_axis_distance * e_normalized_dist;
             z_position = start[Z_AXIS] + on_axis_distance * z_normalized_dist;
           }
           else {