[2.0.x] typo fix (#11365)

Typo fix

Marlin/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/default/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/AliExpress/CL-260/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/Anet/A6/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/Anet/A8/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/Azteeg/X5GT/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/BQ/Hephestos/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/BQ/WITBOX/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/Cartesio/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/Creality/CR-10/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/Creality/CR-10S/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/Creality/CR-10mini/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/Creality/CR-8/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/Creality/Ender-2/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/Creality/Ender-3/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/Creality/Ender-4/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/Felix/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/Felix/DUAL/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/Geeetech/GT2560/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/Infitary/i3-M508/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/JGAurora/A5/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/MakerParts/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/Malyan/M150/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/Malyan/M200/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/Micromake/C1/basic/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/Mks/Sbase/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/RigidBot/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/SCARA/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/STM32F10/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/STM32F4/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/Sanguinololu/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/TheBorg/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/TinyBoy2/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/Tronxy/X1/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/Tronxy/X5S/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/Tronxy/XY100/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/Velleman/K8200/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/Velleman/K8400/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/adafruit/ST7565/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/delta/generic/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/delta/kossel_mini/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/delta/kossel_pro/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/delta/kossel_xl/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/makibox/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/stm32f103ret6/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/tvrrug/Round2/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/wt150/Configuration.h

  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs