Ver código fonte

Update language_kana_utf8.h

esenapaj 9 anos atrás
pai
commit
c24045475a
1 arquivos alterados com 49 adições e 49 exclusões
  1. 49
    49
      Marlin/language_kana_utf8.h

+ 49
- 49
Marlin/language_kana_utf8.h Ver arquivo

@@ -20,54 +20,54 @@
20 20
 
21 21
 // 片仮名表示定義
22 22
 #define WELCOME_MSG                         MACHINE_NAME " ready."
23
-#define MSG_SD_INSERTED                     "セード ンウニユウアレマシタ"          // "Card inserted"
24
-#define MSG_SD_REMOVED                      "セードゼアリマセン"               // "Card removed"
25
-#define MSG_MAIN                            "イン"                        // "Main"
26
-#define MSG_AUTOSTART                       "ヅドウセイシ"                   // "Autostart"
23
+#define MSG_SD_INSERTED                     "カード ソウニュウサレマシタ"          // "Card inserted"
24
+#define MSG_SD_REMOVED                      "カードガアリマセン"               // "Card removed"
25
+#define MSG_MAIN                            "イン"                        // "Main"
26
+#define MSG_AUTOSTART                       "ジドウカイシ"                   // "Autostart"
27 27
 #define MSG_DISABLE_STEPPERS                "モーターデンゲン オフ"             // "Disable steppers"
28 28
 #define MSG_AUTO_HOME                       "ゲンテンニイドウ"                // "Auto home"
29
-#define MSG_SET_HOME_OFFSETS                "キヅユンオフセツトセツテイ"         // "Set home offsets"
30
-#define MSG_SET_ORIGIN                      "キヅユンセツト"                 // "Set origin"
31
-#define MSG_PREHEAT_PLA                     "PLA ヨネ"                    // "Preheat PLA"
29
+#define MSG_SET_HOME_OFFSETS                "キジュンオフセットセッテイ"         // "Set home offsets"
30
+#define MSG_SET_ORIGIN                      "キジュンセット"                 // "Set origin"
31
+#define MSG_PREHEAT_PLA                     "PLA ヨネ"                    // "Preheat PLA"
32 32
 #define MSG_PREHEAT_PLA_N                   MSG_PREHEAT_PLA " "
33 33
 #define MSG_PREHEAT_PLA_ALL                 MSG_PREHEAT_PLA " スベテ"      // " All"
34
-#define MSG_PREHEAT_PLA_BEDONLY             MSG_PREHEAT_PLA " ベド"    // "Bed"
35
-#define MSG_PREHEAT_PLA_SETTINGS            MSG_PREHEAT_PLA " セテイ"     // "conf"
36
-#define MSG_PREHEAT_ABS                     "ABS ヨネ"                    // "Preheat ABS"
34
+#define MSG_PREHEAT_PLA_BEDONLY             MSG_PREHEAT_PLA " ベド"    // "Bed"
35
+#define MSG_PREHEAT_PLA_SETTINGS            MSG_PREHEAT_PLA " セテイ"     // "conf"
36
+#define MSG_PREHEAT_ABS                     "ABS ヨネ"                    // "Preheat ABS"
37 37
 #define MSG_PREHEAT_ABS_N                   MSG_PREHEAT_ABS " "
38 38
 #define MSG_PREHEAT_ABS_ALL                 MSG_PREHEAT_ABS " スベテ"      // " All"
39
-#define MSG_PREHEAT_ABS_BEDONLY             MSG_PREHEAT_ABS " ベド"    // "Bed"
40
-#define MSG_PREHEAT_ABS_SETTINGS            MSG_PREHEAT_ABS " セテイ"    // "conf"
41
-#define MSG_COOLDOWN                        "セネシテイシ"                    // "Cooldown"
42
-#define MSG_SWITCH_PS_ON                    "デンケゾ オン"                 // "Switch power on"
43
-#define MSG_SWITCH_PS_OFF                   "デンケゾ オフ"                 // "Switch power off"
39
+#define MSG_PREHEAT_ABS_BEDONLY             MSG_PREHEAT_ABS " ベド"    // "Bed"
40
+#define MSG_PREHEAT_ABS_SETTINGS            MSG_PREHEAT_ABS " セテイ"    // "conf"
41
+#define MSG_COOLDOWN                        "カネツテイシ"                    // "Cooldown"
42
+#define MSG_SWITCH_PS_ON                    "デンゲン オン"                 // "Switch power on"
43
+#define MSG_SWITCH_PS_OFF                   "デンゲン オフ"                 // "Switch power off"
44 44
 #define MSG_EXTRUDE                         "オシダシ"                     // "Extrude"
45
-#define MSG_RETRACT                         "リトラト"                     // "Retract"
46
-#define MSG_MOVE_AXIS                       "ヅケイドウ"                   // "Move axis"
47
-#define MSG_MOVE_X                          "Xヅケ イドウ"                 // "Move X"
48
-#define MSG_MOVE_Y                          "Yヅケ イドウ"                 // "Move Y"
49
-#define MSG_MOVE_Z                          "Zヅケ イドウ"                 // "Move Z"
50
-#define MSG_MOVE_E                          "エストルーダー"                // "Extruder"
45
+#define MSG_RETRACT                         "リトラト"                     // "Retract"
46
+#define MSG_MOVE_AXIS                       "ジクイドウ"                   // "Move axis"
47
+#define MSG_MOVE_X                          "Xジク イドウ"                 // "Move X"
48
+#define MSG_MOVE_Y                          "Yジク イドウ"                 // "Move Y"
49
+#define MSG_MOVE_Z                          "Zジク イドウ"                 // "Move Z"
50
+#define MSG_MOVE_E                          "エストルーダー"                // "Extruder"
51 51
 #define MSG_MOVE_01MM                       "0.1mm イドウ"                 // "Move 0.1mm"
52 52
 #define MSG_MOVE_1MM                        "  1mm イドウ"                 // "Move 1mm"
53 53
 #define MSG_MOVE_10MM                       " 10mm イドウ"                 // "Move 10mm"
54
-#define MSG_SPEED                           "スヒ゜ード"                     // "Speed"
54
+#define MSG_SPEED                           "スード"                     // "Speed"
55 55
 #define MSG_NOZZLE                          "ノズル"                       // "Nozzle"
56
-#define MSG_BED                             "ベド"                     // "Bed"
57
-#define MSG_FAN_SPEED                       "ファンンケド"                    // "Fan speed"
58
-#define MSG_FLOW                            "オリリョウ"                     // "Flow"
56
+#define MSG_BED                             "ベド"                     // "Bed"
57
+#define MSG_FAN_SPEED                       "ファンソクド"                    // "Fan speed"
58
+#define MSG_FLOW                            "オリリョウ"                     // "Flow"
59 59
 #define MSG_CONTROL                         "コントロール"                    // "Control"
60 60
 #define MSG_MIN                             LCD_STR_THERMOMETER " Min"
61 61
 #define MSG_MAX                             LCD_STR_THERMOMETER " Max"
62 62
 #define MSG_FACTOR                          LCD_STR_THERMOMETER " Fact"
63
-#define MSG_AUTOTEMP                        "ドウオンド"                  // "Autotemp"
63
+#define MSG_AUTOTEMP                        "ドウオンド"                  // "Autotemp"
64 64
 #define MSG_ON                              "On "
65 65
 #define MSG_OFF                             "Off"
66 66
 #define MSG_PID_P                           "PID-P"
67 67
 #define MSG_PID_I                           "PID-I"
68 68
 #define MSG_PID_D                           "PID-D"
69 69
 #define MSG_PID_C                           "PID-C"
70
-#define MSG_ACC                             "センケド"                     // "Accel"
70
+#define MSG_ACC                             "カソクド"                     // "Accel"
71 71
 #define MSG_VXY_JERK                        "Vxy-jerk"
72 72
 #define MSG_VZ_JERK                         "Vz-jerk"
73 73
 #define MSG_VE_JERK                         "Ve-jerk"
@@ -85,27 +85,27 @@
85 85
 #define MSG_ZSTEPS                          "Zsteps/mm"
86 86
 #define MSG_ESTEPS                          "Esteps/mm"
87 87
 #define MSG_TEMPERATURE                     "オンド"                      // "Temperature"
88
-#define MSG_MOTION                          "ウゴキセテイ"                // "Motion"
89
-#define MSG_VOLUMETRIC                      "フィラント"                    // "Filament"
88
+#define MSG_MOTION                          "ウゴキセテイ"                // "Motion"
89
+#define MSG_VOLUMETRIC                      "フィラント"                    // "Filament"
90 90
 #define MSG_VOLUMETRIC_ENABLED              "E in mm3"
91 91
 #define MSG_FILAMENT_DIAM                   "Fil. Dia."
92 92
 #define MSG_CONTRAST                        "LCDコントラスト"                 // "LCD contrast"
93
-#define MSG_STORE_EPROM                     "ナモリヘセケノウ"                 // "Store memory"
94
-#define MSG_LOAD_EPROM                      "ナモリセラヨミbaミ"               // "Load memory"
95
-#define MSG_RESTORE_FAILSAFE                "セツテイリセツト"               // "Restore failsafe"
96
-#define MSG_REFRESH                         "リフレツシユ"                  // "Refresh"
93
+#define MSG_STORE_EPROM                     "メモリヘカクノウ"                 // "Store memory"
94
+#define MSG_LOAD_EPROM                      "メモリカラヨミコミ"               // "Load memory"
95
+#define MSG_RESTORE_FAILSAFE                "セッテイリセット"               // "Restore failsafe"
96
+#define MSG_REFRESH                         "リフレッシュ"                  // "Refresh"
97 97
 #define MSG_WATCH                           "インフォ"                     // "Info screen"
98
-#define MSG_PREPARE                         "ヅユンゼセツテイ"             //"Prepare"
98
+#define MSG_PREPARE                         "ジュンビセッテイ"             //"Prepare"
99 99
 #define MSG_TUNE                            "チョウセイ"                    // "Tune"
100
-#define MSG_PAUSE_PRINT                     "イチテイシ"                  // "Pause print"
101
-#define MSG_RESUME_PRINT                    "プリントアイセイ"                // "Resume print"
100
+#define MSG_PAUSE_PRINT                     "イチテイシ"                  // "Pause print"
101
+#define MSG_RESUME_PRINT                    "プリントサイカイ"                // "Resume print"
102 102
 #define MSG_STOP_PRINT                      "プリントテイシ"                 // "Stop print"
103
-#define MSG_CARD_MENU                       "SDセードセラプリント"            // "Print from SD"
104
-#define MSG_NO_CARD                         "SDセードゼアリマセン"            // "No SD card"
103
+#define MSG_CARD_MENU                       "SDカードカラプリント"            // "Print from SD"
104
+#define MSG_NO_CARD                         "SDカードガアリマセン"            // "No SD card"
105 105
 #define MSG_DWELL                           "スリープ"                     // "Sleep..."
106
-#define MSG_USERWAIT                        "シバラケオマチケダアイ"           // "Wait for user..."
107
-#define MSG_RESUMING                        "プリントアイセイ"                // "Resuming print"
108
-#define MSG_PRINT_ABORTED                   "プリントチユウシアレマシタ"          // "Print aborted"
106
+#define MSG_USERWAIT                        "シバラクオマチクダサイ"           // "Wait for user..."
107
+#define MSG_RESUMING                        "プリントサイカイ"                // "Resuming print"
108
+#define MSG_PRINT_ABORTED                   "プリントチュウシサレマシタ"          // "Print aborted"
109 109
 #define MSG_NO_MOVE                         "ウゴキマセン"                  // "No move."
110 110
 #define MSG_KILLED                          "ショウキョ"                     // "KILLED. "
111 111
 #define MSG_STOPPED                         "テイシシマシタ"                  // "STOPPED. "
@@ -117,15 +117,15 @@
117 117
 #define MSG_CONTROL_RETRACT_RECOVER_SWAP    "S UnRet+mm"
118 118
 #define MSG_CONTROL_RETRACT_RECOVERF        "UnRet  V"
119 119
 #define MSG_AUTORETRACT                     "AutoRetr."
120
-#define MSG_FILAMENTCHANGE                  "フィラナントコウセン"               // "Change filament"
121
-#define MSG_INIT_SDCARD                     "SDセードアイヨミコミ"              // "Init. SD card"
122
-#define MSG_CNG_SDCARD                      "SDセードコウセン"                // "Change SD card"
123
-#define MSG_ZPROBE_OUT                      "Zプローブ ベツトnゼイ"         // "Z probe out. bed"
120
+#define MSG_FILAMENTCHANGE                  "フィラメントコウカン"               // "Change filament"
121
+#define MSG_INIT_SDCARD                     "SDカードサイヨミコミ"              // "Init. SD card"
122
+#define MSG_CNG_SDCARD                      "SDカードコウカン"                // "Change SD card"
123
+#define MSG_ZPROBE_OUT                      "Zプローブ ベッドガイ"         // "Z probe out. bed"
124 124
 #define MSG_POSITION_UNKNOWN                "ゲンテンハXYイドウゴZ"           // "Home X/Y before Z"
125
-#define MSG_ZPROBE_ZOFFSET                  "Zオフセト"                   // "Z Offset"
126
-#define MSG_BABYSTEP_X                      "ドウ X"                    // "Babystep X"
127
-#define MSG_BABYSTEP_Y                      "ドウ Y"                    // "Babystep Y"
128
-#define MSG_BABYSTEP_Z                      "ドウ Z"                    // "Babystep Z"
125
+#define MSG_ZPROBE_ZOFFSET                  "Zオフセト"                   // "Z Offset"
126
+#define MSG_BABYSTEP_X                      "ドウ X"                    // "Babystep X"
127
+#define MSG_BABYSTEP_Y                      "ドウ Y"                    // "Babystep Y"
128
+#define MSG_BABYSTEP_Z                      "ドウ Z"                    // "Babystep Z"
129 129
 #define MSG_ENDSTOP_ABORT                   "Endstop abort"
130 130
 #define MSG_END_HOUR                        "hours"
131 131
 #define MSG_END_MINUTE                      "minutes"

Carregando…
Cancelar
Salvar