Merge pull request #5856 from thinkyhead/rc_fix_bad_comment

Remove non-applicable comment on MANUAL_Z_HOME_POS

Marlin/Configuration.h

@@ -870,7 +870,7 @@
 // For DELTA this is the top-center of the Cartesian print volume.
 //#define MANUAL_X_HOME_POS 0
 //#define MANUAL_Y_HOME_POS 0
-//#define MANUAL_Z_HOME_POS 0 // Distance between the nozzle to printbed after homing
+//#define MANUAL_Z_HOME_POS 0
 
 // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
 //

Marlin/example_configurations/Cartesio/Configuration.h

@@ -870,7 +870,7 @@
 // For DELTA this is the top-center of the Cartesian print volume.
 //#define MANUAL_X_HOME_POS 0
 //#define MANUAL_Y_HOME_POS 0
-//#define MANUAL_Z_HOME_POS 0 // Distance between the nozzle to printbed after homing
+//#define MANUAL_Z_HOME_POS 0
 
 // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
 //

Marlin/example_configurations/Felix/Configuration.h

@@ -853,7 +853,7 @@
 // For DELTA this is the top-center of the Cartesian print volume.
 //#define MANUAL_X_HOME_POS 0
 //#define MANUAL_Y_HOME_POS 0
-//#define MANUAL_Z_HOME_POS 0 // Distance between the nozzle to printbed after homing
+//#define MANUAL_Z_HOME_POS 0
 
 // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
 //

Marlin/example_configurations/Felix/DUAL/Configuration.h

@@ -853,7 +853,7 @@
 // For DELTA this is the top-center of the Cartesian print volume.
 //#define MANUAL_X_HOME_POS 0
 //#define MANUAL_Y_HOME_POS 0
-//#define MANUAL_Z_HOME_POS 0 // Distance between the nozzle to printbed after homing
+//#define MANUAL_Z_HOME_POS 0
 
 // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
 //

Marlin/example_configurations/Hephestos/Configuration.h

@@ -862,7 +862,7 @@
 // For DELTA this is the top-center of the Cartesian print volume.
 //#define MANUAL_X_HOME_POS 0
 //#define MANUAL_Y_HOME_POS 0
-//#define MANUAL_Z_HOME_POS 0 // Distance between the nozzle to printbed after homing
+//#define MANUAL_Z_HOME_POS 0
 
 // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
 //

Marlin/example_configurations/Hephestos_2/Configuration.h

@@ -864,7 +864,7 @@
 // For DELTA this is the top-center of the Cartesian print volume.
 //#define MANUAL_X_HOME_POS 0
 //#define MANUAL_Y_HOME_POS 0
-//#define MANUAL_Z_HOME_POS 0 // Distance between the nozzle to printbed after homing
+//#define MANUAL_Z_HOME_POS 0
 
 // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
 //

Marlin/example_configurations/K8200/Configuration.h

@@ -899,7 +899,7 @@
 // For DELTA this is the top-center of the Cartesian print volume.
 //#define MANUAL_X_HOME_POS 0
 //#define MANUAL_Y_HOME_POS 0
-//#define MANUAL_Z_HOME_POS 0 // Distance between the nozzle to printbed after homing
+//#define MANUAL_Z_HOME_POS 0
 
 // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
 //

Marlin/example_configurations/K8400/Configuration.h

@@ -870,7 +870,7 @@
 // For DELTA this is the top-center of the Cartesian print volume.
 //#define MANUAL_X_HOME_POS 0
 //#define MANUAL_Y_HOME_POS 0
-//#define MANUAL_Z_HOME_POS 0 // Distance between the nozzle to printbed after homing
+//#define MANUAL_Z_HOME_POS 0
 
 // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
 //

Marlin/example_configurations/K8400/Dual-head/Configuration.h

@@ -870,7 +870,7 @@
 // For DELTA this is the top-center of the Cartesian print volume.
 //#define MANUAL_X_HOME_POS 0
 //#define MANUAL_Y_HOME_POS 0
-//#define MANUAL_Z_HOME_POS 0 // Distance between the nozzle to printbed after homing
+//#define MANUAL_Z_HOME_POS 0
 
 // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
 //

Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h

@@ -870,7 +870,7 @@
 // For DELTA this is the top-center of the Cartesian print volume.
 //#define MANUAL_X_HOME_POS 0
 //#define MANUAL_Y_HOME_POS 0
-//#define MANUAL_Z_HOME_POS 0 // Distance between the nozzle to printbed after homing
+//#define MANUAL_Z_HOME_POS 0
 
 // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
 //

Marlin/example_configurations/RigidBot/Configuration.h

@@ -869,7 +869,7 @@
 // For DELTA this is the top-center of the Cartesian print volume.
 //#define MANUAL_X_HOME_POS 0
 //#define MANUAL_Y_HOME_POS 0
-//#define MANUAL_Z_HOME_POS 0 // Distance between the nozzle to printbed after homing
+//#define MANUAL_Z_HOME_POS 0
 
 // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
 //

Marlin/example_configurations/SCARA/Configuration.h

@@ -885,7 +885,7 @@
 // For DELTA this is the top-center of the Cartesian print volume.
 #define MANUAL_X_HOME_POS -22
 #define MANUAL_Y_HOME_POS -52
-#define MANUAL_Z_HOME_POS 0.1 // Distance between the nozzle to printbed after homing
+#define MANUAL_Z_HOME_POS 0.1
 
 // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
 //

Marlin/example_configurations/TAZ4/Configuration.h

@@ -891,7 +891,7 @@
 // For DELTA this is the top-center of the Cartesian print volume.
 //#define MANUAL_X_HOME_POS 0
 //#define MANUAL_Y_HOME_POS 0
-//#define MANUAL_Z_HOME_POS 0 // Distance between the nozzle to printbed after homing
+//#define MANUAL_Z_HOME_POS 0
 
 // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
 //

Marlin/example_configurations/WITBOX/Configuration.h

@@ -862,7 +862,7 @@
 // For DELTA this is the top-center of the Cartesian print volume.
 //#define MANUAL_X_HOME_POS 0
 //#define MANUAL_Y_HOME_POS 0
-//#define MANUAL_Z_HOME_POS 0 // Distance between the nozzle to printbed after homing
+//#define MANUAL_Z_HOME_POS 0
 
 // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
 //

Marlin/example_configurations/adafruit/ST7565/Configuration.h

@@ -870,7 +870,7 @@
 // For DELTA this is the top-center of the Cartesian print volume.
 //#define MANUAL_X_HOME_POS 0
 //#define MANUAL_Y_HOME_POS 0
-//#define MANUAL_Z_HOME_POS 0 // Distance between the nozzle to printbed after homing
+//#define MANUAL_Z_HOME_POS 0
 
 // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
 //

Marlin/example_configurations/makibox/Configuration.h

@@ -873,7 +873,7 @@
 // For DELTA this is the top-center of the Cartesian print volume.
 //#define MANUAL_X_HOME_POS 0
 //#define MANUAL_Y_HOME_POS 0
-//#define MANUAL_Z_HOME_POS 0 // Distance between the nozzle to printbed after homing
+//#define MANUAL_Z_HOME_POS 0
 
 // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
 //

Marlin/example_configurations/tvrrug/Round2/Configuration.h

@@ -866,7 +866,7 @@
 // For DELTA this is the top-center of the Cartesian print volume.
 //#define MANUAL_X_HOME_POS 0
 //#define MANUAL_Y_HOME_POS 0
-//#define MANUAL_Z_HOME_POS 0 // Distance between the nozzle to printbed after homing
+//#define MANUAL_Z_HOME_POS 0
 
 // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
 //