Merge pull request #2146 from Wackerbarth/Versioning

Versioning

Marlin/Configuration.h

 
 // @section info
 
+#ifdef HAS_AUTOMATIC_VERSIONING
+  #include "_Version.h"
+#else
+  #include "Default_Version.h"
+#endif
+
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
 // startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
 // build by the user have been successfully uploaded into firmware.
-#define STRING_VERSION "1.0.3 dev"
-#define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
 #define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
-#define STRING_SPLASH_LINE1 "v" STRING_VERSION // will be shown during bootup in line 1
-//#define STRING_SPLASH_LINE2 STRING_VERSION_CONFIG_H // will be shown during bootup in line2
+#define STRING_SPLASH_LINE1 BUILD_VERSION // will be shown during bootup in line 1
+//#define STRING_SPLASH_LINE2 STRING_DISTRIBUTION_DATE // will be shown during bootup in line 2
 
 // @section machine
 

Marlin/Default_Version.h

+/*
+ * This file is a placeholder for a file which could be distributed in an archive
+ * It takes the place of an automatically created "_Version.h" which is generated during the build process
+ */
+
+// #error "You must specify the following parameter related to your distribution"
+
+#if true
+  #define BUILD_VERSION "1.1.0 dev"
+  #define STRING_DISTRIBUTION_DATE "2015-06-00 12:00"
+  // It might also be appropriate to define a location where additional information can be found
+  #define SOURCE_CODE_URL  "http:// ..."
+#endif

Marlin/Marlin_main.cpp

   MCUSR = 0;
 
   SERIAL_ECHOPGM(MSG_MARLIN);
-  SERIAL_ECHOLNPGM(" " STRING_VERSION);
+  SERIAL_ECHOLNPGM(" " BUILD_VERSION);
 
-  #ifdef STRING_VERSION_CONFIG_H
+  #ifdef STRING_DISTRIBUTION_DATE
     #ifdef STRING_CONFIG_H_AUTHOR
       SERIAL_ECHO_START;
       SERIAL_ECHOPGM(MSG_CONFIGURATION_VER);
-      SERIAL_ECHOPGM(STRING_VERSION_CONFIG_H);
+      SERIAL_ECHOPGM(STRING_DISTRIBUTION_DATE);
       SERIAL_ECHOPGM(MSG_AUTHOR);
       SERIAL_ECHOLNPGM(STRING_CONFIG_H_AUTHOR);
       SERIAL_ECHOPGM("Compiled: ");
       SERIAL_ECHOLNPGM(__DATE__);
     #endif // STRING_CONFIG_H_AUTHOR
-  #endif // STRING_VERSION_CONFIG_H
+  #endif // STRING_DISTRIBUTION_DATE
 
   SERIAL_ECHO_START;
   SERIAL_ECHOPGM(MSG_FREE_MEMORY);

Marlin/configurator/config/Configuration.h

 
 // @section info
 
+#ifdef HAS_AUTOMATIC_VERSIONING
+  #include "_Version.h"
+#else
+  #include "Default_Version.h"
+#endif
+
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
 // startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
 // build by the user have been successfully uploaded into firmware.
-#define STRING_VERSION "1.0.3 dev"
-#define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
 #define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
-#define STRING_SPLASH_LINE1 "v" STRING_VERSION // will be shown during bootup in line 1
-//#define STRING_SPLASH_LINE2 STRING_VERSION_CONFIG_H // will be shown during bootup in line2
+#define STRING_SPLASH_LINE1 BUILD_VERSION // will be shown during bootup in line 1
+//#define STRING_SPLASH_LINE2 STRING_DISTRIBUTION_DATE // will be shown during bootup in line 2
 
 // @section machine
 

Marlin/configurator/config/language.h

 
 #if MB(ULTIMAKER)|| MB(ULTIMAKER_OLD)|| MB(ULTIMAIN_2)
   #define MACHINE_NAME "Ultimaker"
-  #define FIRMWARE_URL "http://firmware.ultimaker.com"
+  #define SOURCE_CODE_URL "http://firmware.ultimaker.com"
 #elif MB(RUMBA)
   #define MACHINE_NAME "Rumba"
 #elif MB(3DRAG)
   #define MACHINE_NAME "3Drag"
-  #define FIRMWARE_URL "http://3dprint.elettronicain.it/"
+  #define SOURCE_CODE_URL "http://3dprint.elettronicain.it/"
 #elif MB(K8200)
   #define MACHINE_NAME "K8200"
-  #define FIRMWARE_URL "https://github.com/CONSULitAS/Marlin-K8200"
+  #define SOURCE_CODE_URL "https://github.com/CONSULitAS/Marlin-K8200"
 #elif MB(5DPRINT)
   #define MACHINE_NAME "Makibox"
 #elif MB(SAV_MKI)
   #define MACHINE_NAME "SAV MkI"
-  #define FIRMWARE_URL "https://github.com/fmalpartida/Marlin/tree/SAV-MkI-config"
+  #define SOURCE_CODE_URL "https://github.com/fmalpartida/Marlin/tree/SAV-MkI-config"
 #elif !defined(MACHINE_NAME)
   #define MACHINE_NAME "3D Printer"
 #endif
   #define MACHINE_NAME CUSTOM_MACHINE_NAME
 #endif
 
-#ifndef FIRMWARE_URL
-  #define FIRMWARE_URL "https://github.com/MarlinFirmware/Marlin"
+#ifndef SOURCE_CODE_URL
+  #define SOURCE_CODE_URL "https://github.com/MarlinFirmware/Marlin"
 #endif
 
 #ifndef BUILD_VERSION
 #define MSG_HEATING_COMPLETE                "Heating done."
 #define MSG_BED_HEATING                     "Bed Heating."
 #define MSG_BED_DONE                        "Bed done."
-#define MSG_M115_REPORT                     "FIRMWARE_NAME:Marlin " BUILD_VERSION " FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
+#define MSG_M115_REPORT                     "FIRMWARE_NAME:Marlin " BUILD_VERSION " SOURCE_CODE_URL:" SOURCE_CODE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
 #define MSG_COUNT_X                         " Count X: "
 #define MSG_ERR_KILLED                      "Printer halted. kill() called!"
 #define MSG_ERR_STOPPED                     "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"

Marlin/example_configurations/Felix/Configuration.h

 //===========================================================================
 //============================= SCARA Printer ===============================
 //===========================================================================
-// For a Delta printer replace the configuration files with the files in the
+// For a Scara printer replace the configuration files with the files in the
 // example_configurations/SCARA directory.
 //
 
+// @section info
+
+#ifdef HAS_AUTOMATIC_VERSIONING
+  #include "_Version.h"
+#else
+  #include "Default_Version.h"
+#endif
+
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
 // startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
 // build by the user have been successfully uploaded into firmware.
-#define STRING_VERSION "1.0.3 dev"
-#define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
 #define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
-#define STRING_SPLASH_LINE1 "v" STRING_VERSION // will be shown during bootup in line 1
-//#define STRING_SPLASH_LINE2 STRING_VERSION_CONFIG_H // will be shown during bootup in line2
+#define STRING_SPLASH_LINE1 BUILD_VERSION // will be shown during bootup in line 1
+//#define STRING_SPLASH_LINE2 STRING_DISTRIBUTION_DATE // will be shown during bootup in line 2
+
+// @section machine
 
 // SERIAL_PORT selects which serial port should be used for communication with the host.
 // This allows the connection of wireless adapters (for instance) to non-default port pins.
 // Serial port 0 is still used by the Arduino bootloader regardless of this setting.
+// :[0,1,2,3,4,5,6,7]
 #define SERIAL_PORT 0
 
 // This determines the communication speed of the printer

Marlin/example_configurations/Felix/Configuration_DUAL.h

 //===========================================================================
 //============================= SCARA Printer ===============================
 //===========================================================================
-// For a Delta printer replace the configuration files with the files in the
+// For a Scara printer replace the configuration files with the files in the
 // example_configurations/SCARA directory.
 //
 
+// @section info
+
+#ifdef HAS_AUTOMATIC_VERSIONING
+  #include "_Version.h"
+#else
+  #include "Default_Version.h"
+#endif
+
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
 // startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
 // build by the user have been successfully uploaded into firmware.
-#define STRING_VERSION "1.0.3 dev"
-#define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
 #define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
-#define STRING_SPLASH_LINE1 "v" STRING_VERSION // will be shown during bootup in line 1
-//#define STRING_SPLASH_LINE2 STRING_VERSION_CONFIG_H // will be shown during bootup in line2
+#define STRING_SPLASH_LINE1 BUILD_VERSION // will be shown during bootup in line 1
+//#define STRING_SPLASH_LINE2 STRING_DISTRIBUTION_DATE // will be shown during bootup in line 2
+
+// @section machine
 
 // SERIAL_PORT selects which serial port should be used for communication with the host.
 // This allows the connection of wireless adapters (for instance) to non-default port pins.
 // Serial port 0 is still used by the Arduino bootloader regardless of this setting.
+// :[0,1,2,3,4,5,6,7]
 #define SERIAL_PORT 0
 
 // This determines the communication speed of the printer

Marlin/example_configurations/Hephestos/Configuration.h

 //===========================================================================
 //============================= SCARA Printer ===============================
 //===========================================================================
-// For a Delta printer replace the configuration files with the files in the
+// For a Scara printer replace the configuration files with the files in the
 // example_configurations/SCARA directory.
 //
 
+// @section info
+
+#ifdef HAS_AUTOMATIC_VERSIONING
+  #include "_Version.h"
+#else
+  #include "Default_Version.h"
+#endif
+
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
 // startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
 // build by the user have been successfully uploaded into firmware.
-#define STRING_VERSION "1.0.3 dev"
-#define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
-#define STRING_CONFIG_H_AUTHOR "(bq Hephestos)" // Who made the changes.
-#define STRING_SPLASH_LINE1 "v" STRING_VERSION // will be shown during bootup in line 1
-//#define STRING_SPLASH_LINE2 STRING_VERSION_CONFIG_H // will be shown during bootup in line2
+#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
+#define STRING_SPLASH_LINE1 BUILD_VERSION // will be shown during bootup in line 1
+//#define STRING_SPLASH_LINE2 STRING_DISTRIBUTION_DATE // will be shown during bootup in line 2
+
+// @section machine
 
 // SERIAL_PORT selects which serial port should be used for communication with the host.
 // This allows the connection of wireless adapters (for instance) to non-default port pins.
 // Serial port 0 is still used by the Arduino bootloader regardless of this setting.
+// :[0,1,2,3,4,5,6,7]
 #define SERIAL_PORT 0
 
 // This determines the communication speed of the printer
 #define CUSTOM_MACHINE_NAME "HEPHESTOS"
 
 // Added for BQ
-#define FIRMWARE_URL "http://www.bq.com/gb/downloads-prusa-i3-hephestos.html"
+#define SOURCE_CODE_URL "http://www.bq.com/gb/downloads-prusa-i3-hephestos.html"
  
 // Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
 // You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)

Marlin/example_configurations/K8200/Configuration.h

 
 // @section info
 
+#ifdef HAS_AUTOMATIC_VERSIONING
+  #include "_Version.h"
+#else
+  #include "Default_Version.h"
+#endif
+
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
 // startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
 // build by the user have been successfully uploaded into firmware.
-#define STRING_VERSION "1.0.3 dev"
-#define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
 #define STRING_CONFIG_H_AUTHOR "(K8200, CONSULitAS)" // Who made the changes.
-#define STRING_SPLASH_LINE1 "v" STRING_VERSION // will be shown during bootup in line 1
-//#define STRING_SPLASH_LINE2 STRING_VERSION_CONFIG_H // will be shown during bootup in line2
+#define STRING_SPLASH_LINE1 BUILD_VERSION // will be shown during bootup in line 1
+//#define STRING_SPLASH_LINE2 STRING_DISTRIBUTION_DATE // will be shown during bootup in line 2
 
 // @section machine
 

Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h

 
 // @section info
 
+#ifdef HAS_AUTOMATIC_VERSIONING
+  #include "_Version.h"
+#else
+  #include "Default_Version.h"
+#endif
+
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
 // startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
 // build by the user have been successfully uploaded into firmware.
-#define STRING_VERSION "1.0.3 dev"
-#define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
 #define STRING_CONFIG_H_AUTHOR "RepRapWorld.com" // Who made the changes.
-#define STRING_SPLASH_LINE1 "v" STRING_VERSION // will be shown during bootup in line 1
-//#define STRING_SPLASH_LINE2 STRING_VERSION_CONFIG_H // will be shown during bootup in line2
+#define STRING_SPLASH_LINE1 BUILD_VERSION // will be shown during bootup in line 1
+//#define STRING_SPLASH_LINE2 STRING_DISTRIBUTION_DATE // will be shown during bootup in line 2
 
 // @section machine
 

Marlin/example_configurations/SCARA/Configuration.h

 // BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration
 
 //===========================================================================
+//============================= DELTA Printer ===============================
+//===========================================================================
+// For a Delta printer replace the configuration files with the files in the
+// example_configurations/delta directory.
+//
+
+//===========================================================================
 //========================= SCARA Settings ==================================
 //===========================================================================
 // SCARA-mode for Marlin has been developed by QHARLEY in ZA in 2012/2013. Implemented
 //========================= SCARA Settings end ==============================
 //===========================================================================
 
+// @section info
+
+#ifdef HAS_AUTOMATIC_VERSIONING
+  #include "_Version.h"
+#else
+  #include "Default_Version.h"
+#endif
+
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
 // startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
 // build by the user have been successfully uploaded into firmware.
-#define STRING_VERSION "1.0.3 dev"
-#define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
 #define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
-#define STRING_SPLASH_LINE1 "v" STRING_VERSION // will be shown during bootup in line 1
-//#define STRING_SPLASH_LINE2 STRING_VERSION_CONFIG_H // will be shown during bootup in line2
+#define STRING_SPLASH_LINE1 BUILD_VERSION // will be shown during bootup in line 1
+//#define STRING_SPLASH_LINE2 STRING_DISTRIBUTION_DATE // will be shown during bootup in line 2
+
+// @section machine
 
 // SERIAL_PORT selects which serial port should be used for communication with the host.
 // This allows the connection of wireless adapters (for instance) to non-default port pins.
 // Serial port 0 is still used by the Arduino bootloader regardless of this setting.
+// :[0,1,2,3,4,5,6,7]
 #define SERIAL_PORT 0
 
 // This determines the communication speed of the printer

Marlin/example_configurations/WITBOX/Configuration.h

 //===========================================================================
 //============================= SCARA Printer ===============================
 //===========================================================================
-// For a Delta printer replace the configuration files with the files in the
+// For a Scara printer replace the configuration files with the files in the
 // example_configurations/SCARA directory.
 //
 
+// @section info
+
+#ifdef HAS_AUTOMATIC_VERSIONING
+  #include "_Version.h"
+#else
+  #include "Default_Version.h"
+#endif
+
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
 // startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
 // build by the user have been successfully uploaded into firmware.
-#define STRING_VERSION "1.0.3 dev"
-#define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
 #define STRING_CONFIG_H_AUTHOR "(bq Witbox)" // Who made the changes.
-#define STRING_SPLASH_LINE1 "v" STRING_VERSION // will be shown during bootup in line 1
-//#define STRING_SPLASH_LINE2 STRING_VERSION_CONFIG_H // will be shown during bootup in line2
+#define STRING_SPLASH_LINE1 BUILD_VERSION // will be shown during bootup in line 1
+//#define STRING_SPLASH_LINE2 STRING_DISTRIBUTION_DATE // will be shown during bootup in line 2
+
+// @section machine
 
 // SERIAL_PORT selects which serial port should be used for communication with the host.
 // This allows the connection of wireless adapters (for instance) to non-default port pins.
 // Serial port 0 is still used by the Arduino bootloader regardless of this setting.
+// :[0,1,2,3,4,5,6,7]
 #define SERIAL_PORT 0
 
 // This determines the communication speed of the printer
 #define CUSTOM_MACHINE_NAME "WITBOX"
 
 // Added for BQ
-#define FIRMWARE_URL "http://www.bq.com/gb/downloads-witbox.html"
+#define SOURCE_CODE_URL "http://www.bq.com/gb/downloads-witbox.html"
 
 // Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
 // You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)

Marlin/example_configurations/delta/biv2.5/Configuration.h

 //===========================================================================
 //============================= SCARA Printer ===============================
 //===========================================================================
-// For a Delta printer replace the configuration files with the files in the
+// For a Scara printer replace the configuration files with the files in the
 // example_configurations/SCARA directory.
 //
 
+// @section info
+
+#ifdef HAS_AUTOMATIC_VERSIONING
+  #include "_Version.h"
+#else
+  #include "Default_Version.h"
+#endif
+
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
 // startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
 // build by the user have been successfully uploaded into firmware.
-#define STRING_VERSION "1.0.3 dev"
-#define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
 #define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
-#define STRING_SPLASH_LINE1 "v" STRING_VERSION // will be shown during bootup in line 1
-//#define STRING_SPLASH_LINE2 STRING_VERSION_CONFIG_H // will be shown during bootup in line2
+#define STRING_SPLASH_LINE1 BUILD_VERSION // will be shown during bootup in line 1
+//#define STRING_SPLASH_LINE2 STRING_DISTRIBUTION_DATE // will be shown during bootup in line 2
+
+// @section machine
 
 // SERIAL_PORT selects which serial port should be used for communication with the host.
 // This allows the connection of wireless adapters (for instance) to non-default port pins.
 // Serial port 0 is still used by the Arduino bootloader regardless of this setting.
+// :[0,1,2,3,4,5,6,7]
 #define SERIAL_PORT 0
 
 // This determines the communication speed of the printer

Marlin/example_configurations/delta/generic/Configuration.h

 //===========================================================================
 //============================= SCARA Printer ===============================
 //===========================================================================
-// For a Delta printer replace the configuration files with the files in the
+// For a Scara printer replace the configuration files with the files in the
 // example_configurations/SCARA directory.
 //
 
+// @section info
+
+#ifdef HAS_AUTOMATIC_VERSIONING
+  #include "_Version.h"
+#else
+  #include "Default_Version.h"
+#endif
+
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
 // startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
 // build by the user have been successfully uploaded into firmware.
-#define STRING_VERSION "1.0.3 dev"
-#define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
 #define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
-#define STRING_SPLASH_LINE1 "v" STRING_VERSION // will be shown during bootup in line 1
-//#define STRING_SPLASH_LINE2 STRING_VERSION_CONFIG_H // will be shown during bootup in line2
+#define STRING_SPLASH_LINE1 BUILD_VERSION // will be shown during bootup in line 1
+//#define STRING_SPLASH_LINE2 STRING_DISTRIBUTION_DATE // will be shown during bootup in line 2
+
+// @section machine
 
 // SERIAL_PORT selects which serial port should be used for communication with the host.
 // This allows the connection of wireless adapters (for instance) to non-default port pins.
 // Serial port 0 is still used by the Arduino bootloader regardless of this setting.
+// :[0,1,2,3,4,5,6,7]
 #define SERIAL_PORT 0
 
 // This determines the communication speed of the printer

Marlin/example_configurations/delta/kossel_mini/Configuration.h

 //===========================================================================
 //============================= SCARA Printer ===============================
 //===========================================================================
-// For a Delta printer replace the configuration files with the files in the
+// For a Scara printer replace the configuration files with the files in the
 // example_configurations/SCARA directory.
 //
 
+// @section info
+
+#ifdef HAS_AUTOMATIC_VERSIONING
+  #include "_Version.h"
+#else
+  #include "Default_Version.h"
+#endif
+
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
 // startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
 // build by the user have been successfully uploaded into firmware.
-#define STRING_VERSION "1.0.3 dev"
-#define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
 #define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
-#define STRING_SPLASH_LINE1 "v" STRING_VERSION // will be shown during bootup in line 1
-//#define STRING_SPLASH_LINE2 STRING_VERSION_CONFIG_H // will be shown during bootup in line2
+#define STRING_SPLASH_LINE1 BUILD_VERSION // will be shown during bootup in line 1
+//#define STRING_SPLASH_LINE2 STRING_DISTRIBUTION_DATE // will be shown during bootup in line 2
+
+// @section machine
 
 // SERIAL_PORT selects which serial port should be used for communication with the host.
 // This allows the connection of wireless adapters (for instance) to non-default port pins.
 // Serial port 0 is still used by the Arduino bootloader regardless of this setting.
+// :[0,1,2,3,4,5,6,7]
 #define SERIAL_PORT 0
 
 // This determines the communication speed of the printer

Marlin/example_configurations/delta/kossel_pro/Configuration.h

 // For a Scara printer replace the configuration files with the files in the
 // example_configurations/SCARA directory.
 //
+
+// @section info
+
 #ifdef HAS_AUTOMATIC_VERSIONING
   #include "_Version.h"
 #else
   #include "Default_Version.h"
 #endif
 
-// @section info
-
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
 // startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
 // build by the user have been successfully uploaded into firmware.

Marlin/example_configurations/makibox/Configuration.h

 //===========================================================================
 //============================= SCARA Printer ===============================
 //===========================================================================
-// For a Delta printer replace the configuration files with the files in the
+// For a Scara printer replace the configuration files with the files in the
 // example_configurations/SCARA directory.
 //
 
+// @section info
+
+#ifdef HAS_AUTOMATIC_VERSIONING
+  #include "_Version.h"
+#else
+  #include "Default_Version.h"
+#endif
+
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
 // startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
 // build by the user have been successfully uploaded into firmware.
-#define STRING_VERSION "1.0.3 dev"
-#define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
 #define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
-#define STRING_SPLASH_LINE1 "v" STRING_VERSION // will be shown during bootup in line 1
-//#define STRING_SPLASH_LINE2 STRING_VERSION_CONFIG_H // will be shown during bootup in line2
+#define STRING_SPLASH_LINE1 BUILD_VERSION // will be shown during bootup in line 1
+//#define STRING_SPLASH_LINE2 STRING_DISTRIBUTION_DATE // will be shown during bootup in line 2
+
+// @section machine
 
 // SERIAL_PORT selects which serial port should be used for communication with the host.
 // This allows the connection of wireless adapters (for instance) to non-default port pins.
 // Serial port 0 is still used by the Arduino bootloader regardless of this setting.
+// :[0,1,2,3,4,5,6,7]
 #define SERIAL_PORT 0
 
 // This determines the communication speed of the printer

Marlin/example_configurations/tvrrug/Round2/Configuration.h

 //===========================================================================
 //============================= SCARA Printer ===============================
 //===========================================================================
-// For a Delta printer replace the configuration files with the files in the
+// For a Scara printer replace the configuration files with the files in the
 // example_configurations/SCARA directory.
 //
 
+// @section info
+
+#ifdef HAS_AUTOMATIC_VERSIONING
+  #include "_Version.h"
+#else
+  #include "Default_Version.h"
+#endif
+
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
 // startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
 // build by the user have been successfully uploaded into firmware.
-#define STRING_VERSION "1.0.3 dev"
-#define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
 #define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
-#define STRING_SPLASH_LINE1 "v" STRING_VERSION // will be shown during bootup in line 1
-//#define STRING_SPLASH_LINE2 STRING_VERSION_CONFIG_H // will be shown during bootup in line2
+#define STRING_SPLASH_LINE1 BUILD_VERSION // will be shown during bootup in line 1
+//#define STRING_SPLASH_LINE2 STRING_DISTRIBUTION_DATE // will be shown during bootup in line 2
+
+// @section machine
 
 // SERIAL_PORT selects which serial port should be used for communication with the host.
 // This allows the connection of wireless adapters (for instance) to non-default port pins.
 // Serial port 0 is still used by the Arduino bootloader regardless of this setting.
+// :[0,1,2,3,4,5,6,7]
 #define SERIAL_PORT 0
 
 // This determines the communication speed of the printer

Marlin/language.h

 
 #if MB(ULTIMAKER)|| MB(ULTIMAKER_OLD)|| MB(ULTIMAIN_2)
   #define MACHINE_NAME "Ultimaker"
-  #define FIRMWARE_URL "http://firmware.ultimaker.com"
+  #define SOURCE_CODE_URL "http://firmware.ultimaker.com"
 #elif MB(RUMBA)
   #define MACHINE_NAME "Rumba"
 #elif MB(3DRAG)
   #define MACHINE_NAME "3Drag"
-  #define FIRMWARE_URL "http://3dprint.elettronicain.it/"
+  #define SOURCE_CODE_URL "http://3dprint.elettronicain.it/"
 #elif MB(K8200)
   #define MACHINE_NAME "K8200"
-  #define FIRMWARE_URL "https://github.com/CONSULitAS/Marlin-K8200"
+  #define SOURCE_CODE_URL "https://github.com/CONSULitAS/Marlin-K8200"
 #elif MB(5DPRINT)
   #define MACHINE_NAME "Makibox"
 #elif MB(SAV_MKI)
   #define MACHINE_NAME "SAV MkI"
-  #define FIRMWARE_URL "https://github.com/fmalpartida/Marlin/tree/SAV-MkI-config"
+  #define SOURCE_CODE_URL "https://github.com/fmalpartida/Marlin/tree/SAV-MkI-config"
 #elif !defined(MACHINE_NAME)
   #define MACHINE_NAME "3D Printer"
 #endif
   #define MACHINE_NAME CUSTOM_MACHINE_NAME
 #endif
 
-#ifndef FIRMWARE_URL
-  #define FIRMWARE_URL "https://github.com/MarlinFirmware/Marlin"
+#ifndef SOURCE_CODE_URL
+  #define SOURCE_CODE_URL "https://github.com/MarlinFirmware/Marlin"
 #endif
 
 #ifndef BUILD_VERSION
 #define MSG_HEATING_COMPLETE                "Heating done."
 #define MSG_BED_HEATING                     "Bed Heating."
 #define MSG_BED_DONE                        "Bed done."
-#define MSG_M115_REPORT                     "FIRMWARE_NAME:Marlin " BUILD_VERSION " FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
+#define MSG_M115_REPORT                     "FIRMWARE_NAME:Marlin " BUILD_VERSION " SOURCE_CODE_URL:" SOURCE_CODE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
 #define MSG_COUNT_X                         " Count X: "
 #define MSG_ERR_KILLED                      "Printer halted. kill() called!"
 #define MSG_ERR_STOPPED                     "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"