Add support for 2 Neopixel strips (#14667)

Marlin/Configuration.h

@@ -2144,8 +2144,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

Marlin/src/feature/leds/leds.cpp

@@ -39,7 +39,7 @@
 #endif
 
 #if ENABLED(PCA9533)
-  #include "SailfishRGB_LED.h"
+  #include <SailfishRGB_LED.h>
 #endif
 
 #if ENABLED(LED_COLOR_PRESETS)
@@ -69,7 +69,7 @@ void LEDLights::setup() {
     #endif
   #endif
   #if ENABLED(NEOPIXEL_LED)
-    setup_neopixel();
+    neo.init();
   #endif
   #if ENABLED(PCA9533)
     RGBinit();
@@ -88,23 +88,28 @@ void LEDLights::set_color(const LEDColor &incol
   #if ENABLED(NEOPIXEL_LED)
 
     const uint32_t neocolor = LEDColorWhite() == incol
-                            ? pixels.Color(NEO_WHITE)
-                            : pixels.Color(incol.r, incol.g, incol.b, incol.w);
+                            ? neo.Color(NEO_WHITE)
+                            : neo.Color(incol.r, incol.g, incol.b, incol.w);
     static uint16_t nextLed = 0;
 
     #ifdef NEOPIXEL_BKGD_LED_INDEX
-      if (NEOPIXEL_BKGD_LED_INDEX == nextLed) { nextLed++; return; }
+      if (NEOPIXEL_BKGD_LED_INDEX == nextLed) {
+        if (++nextLed >= neo.pixels()) nextLed = 0;
+        return;
+      }
     #endif
-    pixels.setBrightness(incol.i);
-    if (!isSequence)
-      set_neopixel_color(neocolor);
-    else {
-      pixels.setPixelColor(nextLed, neocolor);
-      pixels.show();
-      if (++nextLed >= pixels.numPixels()) nextLed = 0;
+
+    neo.set_brightness(incol.i);
+
+    if (isSequence) {
+      neo.set_pixel_color(nextLed, neocolor);
+      neo.show();
+      if (++nextLed >= neo.pixels()) nextLed = 0;
       return;
     }
 
+    neo.set_color(neocolor);
+
   #endif
 
   #if ENABLED(BLINKM)

Marlin/src/feature/leds/neopixel.cpp

@@ -34,73 +34,81 @@
   #include "../../core/utility.h"
 #endif
 
-Adafruit_NeoPixel pixels(NEOPIXEL_PIXELS, NEOPIXEL_PIN, NEOPIXEL_TYPE + NEO_KHZ800);
+Marlin_NeoPixel neo;
+
+Adafruit_NeoPixel Marlin_NeoPixel::adaneo1(NEOPIXEL_PIXELS, NEOPIXEL_PIN, NEOPIXEL_TYPE + NEO_KHZ800)
+  #if MULTIPLE_NEOPIXEL_TYPES
+    , Marlin_NeoPixel::adaneo2(NEOPIXEL_PIXELS, NEOPIXEL2_PIN, NEOPIXEL2_TYPE + NEO_KHZ800)
+  #endif
+;
 
 #ifdef NEOPIXEL_BKGD_LED_INDEX
-  void set_neopixel_color_background() {
+
+  void Marlin_NeoPixel::set_color_background() {
     uint8_t background_color[4] = NEOPIXEL_BKGD_COLOR;
-    pixels.setPixelColor(NEOPIXEL_BKGD_LED_INDEX, pixels.Color(background_color[0], background_color[1], background_color[2], background_color[3]));
+    set_pixel_color(NEOPIXEL_BKGD_LED_INDEX, adaneo1.Color(background_color[0], background_color[1], background_color[2], background_color[3]));
   }
+
 #endif
 
-void set_neopixel_color(const uint32_t color) {
-  for (uint16_t i = 0; i < pixels.numPixels(); ++i) {
+void Marlin_NeoPixel::set_color(const uint32_t color) {
+  for (uint16_t i = 0; i < pixels(); ++i) {
     #ifdef NEOPIXEL_BKGD_LED_INDEX
       if (i == NEOPIXEL_BKGD_LED_INDEX && color != 0x000000) {
-        set_neopixel_color_background();
+        set_color_background();
         continue;
       }
     #endif
-    pixels.setPixelColor(i, color);
+    set_pixel_color(i, color);
   }
-  pixels.show();
+  show();
 }
 
-void set_neopixel_color_startup(const uint32_t color) {
-  for (uint16_t i = 0; i < pixels.numPixels(); ++i)
-    pixels.setPixelColor(i, color);
-  pixels.show();
+void Marlin_NeoPixel::set_color_startup(const uint32_t color) {
+  for (uint16_t i = 0; i < pixels(); ++i)
+    set_pixel_color(i, color);
+  show();
 }
 
-void setup_neopixel() {
+void Marlin_NeoPixel::init() {
   SET_OUTPUT(NEOPIXEL_PIN);
-  pixels.setBrightness(NEOPIXEL_BRIGHTNESS); // 0 - 255 range
-  pixels.begin();
-  pixels.show(); // initialize to all off
+  set_brightness(NEOPIXEL_BRIGHTNESS); // 0 - 255 range
+  begin();
+  show();  // initialize to all off
 
   #if ENABLED(NEOPIXEL_STARTUP_TEST)
     safe_delay(1000);
-    set_neopixel_color_startup(pixels.Color(255, 0, 0, 0));  // red
+    set_color_startup(adaneo1.Color(255, 0, 0, 0));  // red
     safe_delay(1000);
-    set_neopixel_color_startup(pixels.Color(0, 255, 0, 0));  // green
+    set_color_startup(adaneo1.Color(0, 255, 0, 0));  // green
     safe_delay(1000);
-    set_neopixel_color_startup(pixels.Color(0, 0, 255, 0));  // blue
+    set_color_startup(adaneo1.Color(0, 0, 255, 0));  // blue
     safe_delay(1000);
   #endif
 
   #ifdef NEOPIXEL_BKGD_LED_INDEX
-    set_neopixel_color_background();
+    set_color_background();
   #endif
 
   #if ENABLED(LED_USER_PRESET_STARTUP)
-    set_neopixel_color(pixels.Color(LED_USER_PRESET_RED, LED_USER_PRESET_GREEN, LED_USER_PRESET_BLUE, LED_USER_PRESET_WHITE));
+    set_color(adaneo1.Color(LED_USER_PRESET_RED, LED_USER_PRESET_GREEN, LED_USER_PRESET_BLUE, LED_USER_PRESET_WHITE));
   #else
-    set_neopixel_color(pixels.Color(0, 0, 0, 0));
+    set_color(adaneo1.Color(0, 0, 0, 0));
   #endif
 }
 
 #if 0
-bool neopixel_set_led_color(const uint8_t r, const uint8_t g, const uint8_t b, const uint8_t w, const uint8_t p) {
-  const uint32_t color = pixels.Color(r, g, b, w);
-  pixels.setBrightness(p);
+bool Marlin_NeoPixel::set_led_color(const uint8_t r, const uint8_t g, const uint8_t b, const uint8_t w, const uint8_t p) {
+  const uint32_t color = adaneo1.Color(r, g, b, w);
+  set_brightness(p);
   #if DISABLED(NEOPIXEL_IS_SEQUENTIAL)
-    set_neopixel_color(color);
+    set_color(color);
     return false;
   #else
     static uint16_t nextLed = 0;
-    pixels.setPixelColor(nextLed, color);
-    pixels.show();
-    if (++nextLed >= pixels.numPixels()) nextLed = 0;
+    set_pixel_color(nextLed, color);
+    show();
+    if (++nextLed >= pixels()) nextLed = 0;
     return true;
   #endif
 }

Marlin/src/feature/leds/neopixel.h

@@ -25,11 +25,21 @@
  * Neopixel support
  */
 
+// ------------------------
+// Includes
+// ------------------------
+
 #include "../../inc/MarlinConfig.h"
 
 #include <Adafruit_NeoPixel.h>
 #include <stdint.h>
 
+// ------------------------
+// Defines
+// ------------------------
+
+#define MULTIPLE_NEOPIXEL_TYPES (defined(NEOPIXEL2_TYPE) && (NEOPIXEL2_TYPE != NEOPIXEL_TYPE))
+
 #define NEOPIXEL_IS_RGB  (NEOPIXEL_TYPE == NEO_RGB || NEOPIXEL_TYPE == NEO_RBG || NEOPIXEL_TYPE == NEO_GRB || NEOPIXEL_TYPE == NEO_GBR || NEOPIXEL_TYPE == NEO_BRG || NEOPIXEL_TYPE == NEO_BGR)
 #define NEOPIXEL_IS_RGBW !NEOPIXEL_IS_RGB
 
@@ -39,8 +49,70 @@
   #define NEO_WHITE 0, 0, 0, 255
 #endif
 
-void setup_neopixel();
-void set_neopixel_color(const uint32_t color);
-//bool neopixel_set_led_color(const uint8_t r, const uint8_t g, const uint8_t b, const uint8_t w, const uint8_t p);
+// ------------------------
+// Function prototypes
+// ------------------------
+
+class Marlin_NeoPixel {
+private:
+  static Adafruit_NeoPixel adaneo1
+    #if MULTIPLE_NEOPIXEL_TYPES
+      , adaneo2
+    #endif
+  ;
+
+public:
+  static void init();
+  static void set_color_startup(const uint32_t c);
+
+  static void set_color(const uint32_t c);
+  static void set_color_background();
+  //bool set_led_color(const uint8_t r, const uint8_t g, const uint8_t b, const uint8_t w, const uint8_t p);
+
+  #ifdef NEOPIXEL_BKGD_LED_INDEX
+    static void set_pixel_color(const uint16_t n, const uint32_t c);
+  #endif
+
+  static inline void begin() {
+    adaneo1.begin();
+    #if MULTIPLE_NEOPIXEL_TYPES
+      adaneo2.begin();
+    #endif
+  }
+
+  static inline void set_pixel_color(const uint16_t n, const uint32_t c) {
+    adaneo1.setPixelColor(n, c);
+    #if MULTIPLE_NEOPIXEL_TYPES
+      adaneo2.setPixelColor(n, c);
+    #endif
+  }
+
+  static inline void set_brightness(const uint8_t b) {
+    adaneo1.setBrightness(b);
+    #if MULTIPLE_NEOPIXEL_TYPES
+      adaneo2.setBrightness(b);
+    #endif
+  }
+
+  static inline void show() {
+    adaneo1.show();
+    #if PIN_EXISTS(NEOPIXEL2)
+      #if MULTIPLE_NEOPIXEL_TYPES
+        adaneo2.show();
+      #else
+        adaneo1.setPin(NEOPIXEL2_PIN);
+        adaneo1.show();
+        adaneo1.setPin(NEOPIXEL_PIN);
+      #endif
+    #endif
+  }
+
+  // Accessors
+  static inline uint16_t pixels() { return adaneo1.numPixels(); }
+  static inline uint8_t brightness() { return adaneo1.getBrightness(); }
+  static inline uint32_t Color(uint8_t r, uint8_t g, uint8_t b, uint8_t w) {
+    return adaneo1.Color(r, g, b, w);
+  }
+};
 
-extern Adafruit_NeoPixel pixels;
+extern Marlin_NeoPixel neo;

Marlin/src/feature/leds/printer_event_leds.cpp

@@ -46,7 +46,7 @@ PrinterEventLEDs printerEventLEDs;
 
   inline void pel_set_rgb(const uint8_t r, const uint8_t g, const uint8_t b) {
     leds.set_color(
-      MakeLEDColor(r, g, b, 0, pixels.getBrightness())
+      MakeLEDColor(r, g, b, 0, neo.brightness())
         #if ENABLED(NEOPIXEL_IS_SEQUENTIAL)
           , true
         #endif

Marlin/src/gcode/feature/leds/M150.cpp

@@ -50,7 +50,7 @@ void GcodeSuite::M150() {
     parser.seen('U') ? (parser.has_value() ? parser.value_byte() : 255) : 0,
     parser.seen('B') ? (parser.has_value() ? parser.value_byte() : 255) : 0,
     parser.seen('W') ? (parser.has_value() ? parser.value_byte() : 255) : 0,
-    parser.seen('P') ? (parser.has_value() ? parser.value_byte() : 255) : pixels.getBrightness()
+    parser.seen('P') ? (parser.has_value() ? parser.value_byte() : 255) : neo.brightness()
   ));
 }
 

Marlin/src/inc/Conditionals_LCD.h

@@ -151,12 +151,14 @@
     #define NEOPIXEL_LED
     #undef NEOPIXEL_TYPE
     #define NEOPIXEL_TYPE       NEO_RGB
-    #undef NEOPIXEL_PIXELS
-    #define NEOPIXEL_PIXELS     3
+    #if NEOPIXEL_PIXELS < 3
+      #undef NEOPIXELS_PIXELS
+      #define NEOPIXEL_PIXELS     3
+    #endif
     #ifndef NEOPIXEL_BRIGHTNESS
       #define NEOPIXEL_BRIGHTNESS 127
     #endif
-    #define NEOPIXEL_STARTUP_TEST
+    //#define NEOPIXEL_STARTUP_TEST
   #endif
 
 #elif ENABLED(ULTI_CONTROLLER)

Marlin/src/lcd/ultralcd.cpp

@@ -587,8 +587,8 @@ void MarlinUI::kill_screen(PGM_P lcd_msg) {
   #ifdef LED_BACKLIGHT_TIMEOUT
     leds.set_color(LEDColorRed());
     #ifdef NEOPIXEL_BKGD_LED_INDEX
-      pixels.setPixelColor(NEOPIXEL_BKGD_LED_INDEX, 255, 0, 0, 0);
-      pixels.show();
+      neo.set_pixel_color(NEOPIXEL_BKGD_LED_INDEX, 255, 0, 0, 0);
+      neo.show();
     #endif
   #endif
 

config/default/Configuration.h

@@ -2144,8 +2144,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/3DFabXYZ/Migbot/Configuration.h

@@ -2175,8 +2175,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/AlephObjects/TAZ4/Configuration.h

@@ -2164,8 +2164,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Alfawise/U20/Configuration.h

@@ -2244,8 +2244,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/AliExpress/CL-260/Configuration.h

@@ -2144,8 +2144,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/AliExpress/UM2pExt/Configuration.h

@@ -2155,8 +2155,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Anet/A2/Configuration.h

@@ -2146,8 +2146,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Anet/A2plus/Configuration.h

@@ -2146,8 +2146,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Anet/A6/Configuration.h

@@ -2297,8 +2297,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Anet/A8/Configuration.h

@@ -2159,8 +2159,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Anet/A8plus/Configuration.h

@@ -2155,8 +2155,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Anet/E16/Configuration.h

@@ -2156,8 +2156,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/AnyCubic/i3/Configuration.h

@@ -2154,8 +2154,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/ArmEd/Configuration.h

@@ -2145,8 +2145,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Azteeg/X5GT/Configuration.h

@@ -2144,8 +2144,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/BIBO/TouchX/cyclops/Configuration.h

@@ -2144,8 +2144,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/BIBO/TouchX/default/Configuration.h

@@ -2144,8 +2144,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/BQ/Hephestos/Configuration.h

@@ -2132,8 +2132,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/BQ/Hephestos_2/Configuration.h

@@ -2144,8 +2144,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/BQ/WITBOX/Configuration.h

@@ -2132,8 +2132,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Cartesio/Configuration.h

@@ -2143,8 +2143,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Creality/CR-10/Configuration.h

@@ -2154,8 +2154,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Creality/CR-10S/Configuration.h

@@ -2145,8 +2145,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Creality/CR-10_5S/Configuration.h

@@ -2147,8 +2147,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Creality/CR-10mini/Configuration.h

@@ -2163,8 +2163,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Creality/CR-20 Pro/Configuration.h

@@ -2141,8 +2141,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Creality/CR-20/Configuration.h

@@ -2141,8 +2141,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Creality/CR-8/Configuration.h

@@ -2154,8 +2154,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Creality/Ender-2/Configuration.h

@@ -2148,8 +2148,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Creality/Ender-3/Configuration.h

@@ -2148,8 +2148,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Creality/Ender-4/Configuration.h

@@ -2154,8 +2154,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Creality/Ender-5/Configuration.h

@@ -2141,8 +2141,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Dagoma/Disco Ultimate/Configuration.h

@@ -2144,8 +2144,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h

@@ -2149,8 +2149,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Einstart-S/Configuration.h

@@ -2154,8 +2154,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/FYSETC/AIO_II/Configuration.h

@@ -2143,8 +2143,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/FYSETC/Cheetah/BLTouch/Configuration.h

@@ -2118,8 +2118,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/FYSETC/Cheetah/base/Configuration.h

@@ -2143,8 +2143,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/FYSETC/F6_13/Configuration.h

@@ -2144,8 +2144,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Felix/Configuration.h

@@ -2126,8 +2126,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Felix/DUAL/Configuration.h

@@ -2126,8 +2126,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/FlashForge/CreatorPro/Configuration.h

@@ -2135,8 +2135,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/FolgerTech/i3-2020/Configuration.h

@@ -2150,8 +2150,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Formbot/Raptor/Configuration.h

@@ -2249,8 +2249,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Formbot/T_Rex_2+/Configuration.h

@@ -2178,8 +2178,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Formbot/T_Rex_3/Configuration.h

@@ -2172,8 +2172,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Geeetech/A10/Configuration.h

@@ -2129,8 +2129,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Geeetech/A10M/Configuration.h

@@ -2129,8 +2129,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Geeetech/A20M/Configuration.h

@@ -2131,8 +2131,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Geeetech/GT2560/Configuration.h

@@ -2159,8 +2159,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h

@@ -2144,8 +2144,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Geeetech/MeCreator2/Configuration.h

@@ -2151,8 +2151,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h

@@ -2165,8 +2165,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h

@@ -2164,8 +2164,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Geeetech/Prusa i3 Pro C/Configuration.h

@@ -2144,8 +2144,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Geeetech/Prusa i3 Pro W/Configuration.h

@@ -2144,8 +2144,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Infitary/i3-M508/Configuration.h

@@ -2148,8 +2148,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/JGAurora/A1/Configuration.h

@@ -2141,8 +2141,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/JGAurora/A5/Configuration.h

@@ -2156,8 +2156,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/JGAurora/A5S/Configuration.h

@@ -2142,8 +2142,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/MakerParts/Configuration.h

@@ -2164,8 +2164,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Malyan/M150/Configuration.h

@@ -2172,8 +2172,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Malyan/M200/Configuration.h

@@ -2152,8 +2152,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Micromake/C1/basic/Configuration.h

@@ -2148,8 +2148,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Micromake/C1/enhanced/Configuration.h

@@ -2148,8 +2148,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Mks/Robin/Configuration.h

@@ -2146,8 +2146,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Mks/Sbase/Configuration.h

@@ -2144,8 +2144,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Printrbot/PrintrboardG2/Configuration.h

@@ -2154,6 +2154,8 @@
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
   #define NEOPIXEL_PIN    20       // LED driving pin
   #define NEOPIXEL_PIXELS 3        // Number of LEDs in the strip
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   #define NEOPIXEL_STARTUP_TEST    // Cycle through colors at startup

config/examples/RapideLite/RL200/Configuration.h

@@ -2144,8 +2144,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/RepRapPro/Huxley/Configuration.h

@@ -2193,8 +2193,10 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/RepRapWorld/Megatronics/Configuration.h

@@ -2144,8 +2144,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/RigidBot/Configuration.h

@@ -2144,8 +2144,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/SCARA/Configuration.h

@@ -2153,8 +2153,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/STM32/Black_STM32F407VET6/Configuration.h

@@ -2144,8 +2144,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/STM32/STM32F10/Configuration.h

@@ -2146,8 +2146,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/STM32/STM32F4/Configuration.h

@@ -2144,8 +2144,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/STM32/stm32f103ret6/Configuration.h

@@ -2146,8 +2146,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Sanguinololu/Configuration.h

@@ -2175,8 +2175,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Tevo/Michelangelo/Configuration.h

@@ -2149,8 +2149,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Tevo/Tarantula Pro/Configuration.h

@@ -2136,8 +2136,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h

@@ -2149,8 +2149,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h

@@ -2149,8 +2149,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/TheBorg/Configuration.h

@@ -2144,8 +2144,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/TinyBoy2/Configuration.h

@@ -2200,8 +2200,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Tronxy/X1/Configuration.h

@@ -2144,8 +2144,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Tronxy/X3A/Configuration.h

@@ -2148,8 +2148,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Tronxy/X5S-2E/Configuration.h

@@ -2165,8 +2165,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Tronxy/X5S/Configuration.h

@@ -2144,8 +2144,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/Tronxy/XY100/Configuration.h

@@ -2155,8 +2155,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/UltiMachine/Archim1/Configuration.h

@@ -2144,8 +2144,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup

config/examples/UltiMachine/Archim2/Configuration.h

@@ -2144,8 +2144,10 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN    4        // LED driving pin
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip
+  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN    5
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup