thomas
/
marlin
ウォッチ 1
スター 0
フォーク 0
コード 課題 0 プルリクエスト 0 リリース 0 Wiki アクティビティ
ソースを参照

Apply G26 for meshes to all configs

Scott Lahteine 7年前
親
8282d732c1
コミット
e5b43d48ee
37個のファイルの変更、444行の追加、259行の削除
ユニファイド表示 差分情報を表示
  1. 12
    7
      Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h
  2. 12
    7
      Marlin/example_configurations/AliExpress/CL-260/Configuration.h
  3. 12
    7
      Marlin/example_configurations/Anet/A6/Configuration.h
  4. 12
    7
      Marlin/example_configurations/Anet/A8/Configuration.h
  5. 12
    7
      Marlin/example_configurations/BQ/Hephestos/Configuration.h
  6. 12
    7
      Marlin/example_configurations/BQ/Hephestos_2/Configuration.h
  7. 12
    7
      Marlin/example_configurations/BQ/WITBOX/Configuration.h
  8. 12
    7
      Marlin/example_configurations/Cartesio/Configuration.h
  9. 12
    7
      Marlin/example_configurations/Creality/CR-10/Configuration.h
  10. 12
    7
      Marlin/example_configurations/Felix/Configuration.h
  11. 12
    7
      Marlin/example_configurations/Felix/DUAL/Configuration.h
  12. 12
    7
      Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h
  13. 12
    7
      Marlin/example_configurations/Geeetech/GT2560/Configuration.h
  14. 12
    7
      Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h
  15. 12
    7
      Marlin/example_configurations/Infitary/i3-M508/Configuration.h
  16. 12
    7
      Marlin/example_configurations/Malyan/M150/Configuration.h
  17. 12
    7
      Marlin/example_configurations/Micromake/C1/basic/Configuration.h
  18. 12
    7
      Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h
  19. 12
    7
      Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
  20. 12
    7
      Marlin/example_configurations/RigidBot/Configuration.h
  21. 12
    7
      Marlin/example_configurations/SCARA/Configuration.h
  22. 12
    7
      Marlin/example_configurations/Sanguinololu/Configuration.h
  23. 12
    7
      Marlin/example_configurations/TinyBoy2/Configuration.h
  24. 12
    7
      Marlin/example_configurations/Velleman/K8200/Configuration.h
  25. 12
    7
      Marlin/example_configurations/Velleman/K8400/Configuration.h
  26. 12
    7
      Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h
  27. 12
    7
      Marlin/example_configurations/adafruit/ST7565/Configuration.h
  28. 12
    7
      Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h
  29. 12
    7
      Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h
  30. 12
    7
      Marlin/example_configurations/delta/generic/Configuration.h
  31. 12
    7
      Marlin/example_configurations/delta/kossel_mini/Configuration.h
  32. 12
    7
      Marlin/example_configurations/delta/kossel_pro/Configuration.h
  33. 12
    7
      Marlin/example_configurations/delta/kossel_xl/Configuration.h
  34. 12
    7
      Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h
  35. 12
    7
      Marlin/example_configurations/makibox/Configuration.h
  36. 12
    7
      Marlin/example_configurations/tvrrug/Round2/Configuration.h
  37. 12
    7
      Marlin/example_configurations/wt150/Configuration.h

+ 12
- 7
Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h ファイルの表示

910 
   // at which point movement will be level to the machine's XY plane.
 910 
   // at which point movement will be level to the machine's XY plane.
911 
   // The height can be set with M420 Z<height>
 911 
   // The height can be set with M420 Z<height>
912 
   #define ENABLE_LEVELING_FADE_HEIGHT
 912 
   #define ENABLE_LEVELING_FADE_HEIGHT
913 
+
914 
+  /**
915 
+   * Enable the G26 Mesh Validation Pattern tool.
916 
+   */
917 
+  //#define G26_MESH_VALIDATION   // Enable G26 mesh validation
918 
+  #if ENABLED(G26_MESH_VALIDATION)
919 
+    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
920 
+    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
921 
+    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
922 
+    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
923 
+  #endif
924 
+
913 
 #endif
 925 
 #endif
914
926
915 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
 927 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
976 
   #define UBL_PROBE_PT_3_X 180
 988 
   #define UBL_PROBE_PT_3_X 180
977 
   #define UBL_PROBE_PT_3_Y 20
 989 
   #define UBL_PROBE_PT_3_Y 20
978
990
979 
-  #define UBL_G26_MESH_VALIDATION   // Enable G26 mesh validation
980 
-  #if ENABLED(UBL_G26_MESH_VALIDATION)
981 
-    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
982 
-    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
983 
-    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
984 
-    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
985 
-  #endif
986 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
 991 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
987 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 992 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
988
993

+ 12
- 7
Marlin/example_configurations/AliExpress/CL-260/Configuration.h ファイルの表示

890 
   // at which point movement will be level to the machine's XY plane.
 890 
   // at which point movement will be level to the machine's XY plane.
891 
   // The height can be set with M420 Z<height>
 891 
   // The height can be set with M420 Z<height>
892 
   #define ENABLE_LEVELING_FADE_HEIGHT
 892 
   #define ENABLE_LEVELING_FADE_HEIGHT
893 
+
894 
+  /**
895 
+   * Enable the G26 Mesh Validation Pattern tool.
896 
+   */
897 
+  //#define G26_MESH_VALIDATION   // Enable G26 mesh validation
898 
+  #if ENABLED(G26_MESH_VALIDATION)
899 
+    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
900 
+    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
901 
+    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
902 
+    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
903 
+  #endif
904 
+
893 
 #endif
 905 
 #endif
894
906
895 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
 907 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
956 
   #define UBL_PROBE_PT_3_X 180
 968 
   #define UBL_PROBE_PT_3_X 180
957 
   #define UBL_PROBE_PT_3_Y 20
 969 
   #define UBL_PROBE_PT_3_Y 20
958
970
959 
-  #define UBL_G26_MESH_VALIDATION   // Enable G26 mesh validation
960 
-  #if ENABLED(UBL_G26_MESH_VALIDATION)
961 
-    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
962 
-    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
963 
-    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
964 
-    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
965 
-  #endif
966 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
 971 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
967 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 972 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
968
973

+ 12
- 7
Marlin/example_configurations/Anet/A6/Configuration.h ファイルの表示

1009 
   // at which point movement will be level to the machine's XY plane.
 1009 
   // at which point movement will be level to the machine's XY plane.
1010 
   // The height can be set with M420 Z<height>
 1010 
   // The height can be set with M420 Z<height>
1011 
   #define ENABLE_LEVELING_FADE_HEIGHT
 1011 
   #define ENABLE_LEVELING_FADE_HEIGHT
1012 
+
1013 
+  /**
1014 
+   * Enable the G26 Mesh Validation Pattern tool.
1015 
+   */
1016 
+  //#define G26_MESH_VALIDATION   // Enable G26 mesh validation
1017 
+  #if ENABLED(G26_MESH_VALIDATION)
1018 
+    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
1019 
+    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
1020 
+    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
1021 
+    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
1022 
+  #endif
1023 
+
1012 
 #endif
 1024 
 #endif
1013
1025
1014 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
 1026 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
1099 
   #define UBL_PROBE_PT_3_X 180
 1111 
   #define UBL_PROBE_PT_3_X 180
1100 
   #define UBL_PROBE_PT_3_Y 20
 1112 
   #define UBL_PROBE_PT_3_Y 20
1101
1113
1102 
-  #define UBL_G26_MESH_VALIDATION   // Enable G26 mesh validation
1103 
-  #if ENABLED(UBL_G26_MESH_VALIDATION)
1104 
-    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
1105 
-    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
1106 
-    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
1107 
-    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
1108 
-  #endif
1109 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
 1114 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
1110 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 1115 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
1111
1116

+ 12
- 7
Marlin/example_configurations/Anet/A8/Configuration.h ファイルの表示

897 
   // at which point movement will be level to the machine's XY plane.
 897 
   // at which point movement will be level to the machine's XY plane.
898 
   // The height can be set with M420 Z<height>
 898 
   // The height can be set with M420 Z<height>
899 
   #define ENABLE_LEVELING_FADE_HEIGHT
 899 
   #define ENABLE_LEVELING_FADE_HEIGHT
900 
+
901 
+  /**
902 
+   * Enable the G26 Mesh Validation Pattern tool.
903 
+   */
904 
+  //#define G26_MESH_VALIDATION   // Enable G26 mesh validation
905 
+  #if ENABLED(G26_MESH_VALIDATION)
906 
+    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
907 
+    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
908 
+    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
909 
+    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
910 
+  #endif
911 
+
900 
 #endif
 912 
 #endif
901
913
902 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
 914 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
963 
   #define UBL_PROBE_PT_3_X 180
 975 
   #define UBL_PROBE_PT_3_X 180
964 
   #define UBL_PROBE_PT_3_Y 20
 976 
   #define UBL_PROBE_PT_3_Y 20
965
977
966 
-  #define UBL_G26_MESH_VALIDATION   // Enable G26 mesh validation
967 
-  #if ENABLED(UBL_G26_MESH_VALIDATION)
968 
-    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
969 
-    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
970 
-    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
971 
-    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
972 
-  #endif
973 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
 978 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
974 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 979 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
975
980

+ 12
- 7
Marlin/example_configurations/BQ/Hephestos/Configuration.h ファイルの表示

881 
   // at which point movement will be level to the machine's XY plane.
 881 
   // at which point movement will be level to the machine's XY plane.
882 
   // The height can be set with M420 Z<height>
 882 
   // The height can be set with M420 Z<height>
883 
   #define ENABLE_LEVELING_FADE_HEIGHT
 883 
   #define ENABLE_LEVELING_FADE_HEIGHT
884 
+
885 
+  /**
886 
+   * Enable the G26 Mesh Validation Pattern tool.
887 
+   */
888 
+  //#define G26_MESH_VALIDATION   // Enable G26 mesh validation
889 
+  #if ENABLED(G26_MESH_VALIDATION)
890 
+    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
891 
+    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
892 
+    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
893 
+    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
894 
+  #endif
895 
+
884 
 #endif
 896 
 #endif
885
897
886 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
 898 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
947 
   #define UBL_PROBE_PT_3_X 180
 959 
   #define UBL_PROBE_PT_3_X 180
948 
   #define UBL_PROBE_PT_3_Y 20
 960 
   #define UBL_PROBE_PT_3_Y 20
949
961
950 
-  #define UBL_G26_MESH_VALIDATION   // Enable G26 mesh validation
951 
-  #if ENABLED(UBL_G26_MESH_VALIDATION)
952 
-    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
953 
-    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
954 
-    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
955 
-    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
956 
-  #endif
957 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
 962 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
958 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 963 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
959
964

+ 12
- 7
Marlin/example_configurations/BQ/Hephestos_2/Configuration.h ファイルの表示

891 
   // at which point movement will be level to the machine's XY plane.
 891 
   // at which point movement will be level to the machine's XY plane.
892 
   // The height can be set with M420 Z<height>
 892 
   // The height can be set with M420 Z<height>
893 
   #define ENABLE_LEVELING_FADE_HEIGHT
 893 
   #define ENABLE_LEVELING_FADE_HEIGHT
894 
+
895 
+  /**
896 
+   * Enable the G26 Mesh Validation Pattern tool.
897 
+   */
898 
+  //#define G26_MESH_VALIDATION   // Enable G26 mesh validation
899 
+  #if ENABLED(G26_MESH_VALIDATION)
900 
+    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
901 
+    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
902 
+    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
903 
+    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
904 
+  #endif
905 
+
894 
 #endif
 906 
 #endif
895
907
896 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
 908 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
957 
   #define UBL_PROBE_PT_3_X 180
 969 
   #define UBL_PROBE_PT_3_X 180
958 
   #define UBL_PROBE_PT_3_Y 20
 970 
   #define UBL_PROBE_PT_3_Y 20
959
971
960 
-  #define UBL_G26_MESH_VALIDATION   // Enable G26 mesh validation
961 
-  #if ENABLED(UBL_G26_MESH_VALIDATION)
962 
-    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
963 
-    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
964 
-    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
965 
-    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
966 
-  #endif
967 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
 972 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
968 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 973 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
969
974

+ 12
- 7
Marlin/example_configurations/BQ/WITBOX/Configuration.h ファイルの表示

881 
   // at which point movement will be level to the machine's XY plane.
 881 
   // at which point movement will be level to the machine's XY plane.
882 
   // The height can be set with M420 Z<height>
 882 
   // The height can be set with M420 Z<height>
883 
   #define ENABLE_LEVELING_FADE_HEIGHT
 883 
   #define ENABLE_LEVELING_FADE_HEIGHT
884 
+
885 
+  /**
886 
+   * Enable the G26 Mesh Validation Pattern tool.
887 
+   */
888 
+  //#define G26_MESH_VALIDATION   // Enable G26 mesh validation
889 
+  #if ENABLED(G26_MESH_VALIDATION)
890 
+    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
891 
+    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
892 
+    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
893 
+    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
894 
+  #endif
895 
+
884 
 #endif
 896 
 #endif
885
897
886 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
 898 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
947 
   #define UBL_PROBE_PT_3_X 180
 959 
   #define UBL_PROBE_PT_3_X 180
948 
   #define UBL_PROBE_PT_3_Y 20
 960 
   #define UBL_PROBE_PT_3_Y 20
949
961
950 
-  #define UBL_G26_MESH_VALIDATION   // Enable G26 mesh validation
951 
-  #if ENABLED(UBL_G26_MESH_VALIDATION)
952 
-    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
953 
-    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
954 
-    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
955 
-    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
956 
-  #endif
957 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
 962 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
958 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 963 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
959
964

+ 12
- 7
Marlin/example_configurations/Cartesio/Configuration.h ファイルの表示

889 
   // at which point movement will be level to the machine's XY plane.
 889 
   // at which point movement will be level to the machine's XY plane.
890 
   // The height can be set with M420 Z<height>
 890 
   // The height can be set with M420 Z<height>
891 
   #define ENABLE_LEVELING_FADE_HEIGHT
 891 
   #define ENABLE_LEVELING_FADE_HEIGHT
892 
+
893 
+  /**
894 
+   * Enable the G26 Mesh Validation Pattern tool.
895 
+   */
896 
+  //#define G26_MESH_VALIDATION   // Enable G26 mesh validation
897 
+  #if ENABLED(G26_MESH_VALIDATION)
898 
+    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
899 
+    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
900 
+    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
901 
+    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
902 
+  #endif
903 
+
892 
 #endif
 904 
 #endif
893
905
894 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
 906 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
955 
   #define UBL_PROBE_PT_3_X 180
 967 
   #define UBL_PROBE_PT_3_X 180
956 
   #define UBL_PROBE_PT_3_Y 20
 968 
   #define UBL_PROBE_PT_3_Y 20
957
969
958 
-  #define UBL_G26_MESH_VALIDATION   // Enable G26 mesh validation
959 
-  #if ENABLED(UBL_G26_MESH_VALIDATION)
960 
-    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
961 
-    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
962 
-    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
963 
-    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
964 
-  #endif
965 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
 970 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
966 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 971 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
967
972

+ 12
- 7
Marlin/example_configurations/Creality/CR-10/Configuration.h ファイルの表示

900 
   // at which point movement will be level to the machine's XY plane.
 900 
   // at which point movement will be level to the machine's XY plane.
901 
   // The height can be set with M420 Z<height>
 901 
   // The height can be set with M420 Z<height>
902 
   #define ENABLE_LEVELING_FADE_HEIGHT
 902 
   #define ENABLE_LEVELING_FADE_HEIGHT
903 
+
904 
+  /**
905 
+   * Enable the G26 Mesh Validation Pattern tool.
906 
+   */
907 
+  //#define G26_MESH_VALIDATION   // Enable G26 mesh validation
908 
+  #if ENABLED(G26_MESH_VALIDATION)
909 
+    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
910 
+    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
911 
+    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
912 
+    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
913 
+  #endif
914 
+
903 
 #endif
 915 
 #endif
904
916
905 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
 917 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
966 
   #define UBL_PROBE_PT_3_X 180
 978 
   #define UBL_PROBE_PT_3_X 180
967 
   #define UBL_PROBE_PT_3_Y 20
 979 
   #define UBL_PROBE_PT_3_Y 20
968
980
969 
-  //#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation
970 
-  #if ENABLED(UBL_G26_MESH_VALIDATION)
971 
-    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
972 
-    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
973 
-    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
974 
-    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
975 
-  #endif
976 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
 981 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
977 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 982 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
978
983

+ 12
- 7
Marlin/example_configurations/Felix/Configuration.h ファイルの表示

872 
   // at which point movement will be level to the machine's XY plane.
 872 
   // at which point movement will be level to the machine's XY plane.
873 
   // The height can be set with M420 Z<height>
 873 
   // The height can be set with M420 Z<height>
874 
   #define ENABLE_LEVELING_FADE_HEIGHT
 874 
   #define ENABLE_LEVELING_FADE_HEIGHT
875 
+
876 
+  /**
877 
+   * Enable the G26 Mesh Validation Pattern tool.
878 
+   */
879 
+  //#define G26_MESH_VALIDATION   // Enable G26 mesh validation
880 
+  #if ENABLED(G26_MESH_VALIDATION)
881 
+    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
882 
+    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
883 
+    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
884 
+    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
885 
+  #endif
886 
+
875 
 #endif
 887 
 #endif
876
888
877 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
 889 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
938 
   #define UBL_PROBE_PT_3_X 180
 950 
   #define UBL_PROBE_PT_3_X 180
939 
   #define UBL_PROBE_PT_3_Y 20
 951 
   #define UBL_PROBE_PT_3_Y 20
940
952
941 
-  #define UBL_G26_MESH_VALIDATION   // Enable G26 mesh validation
942 
-  #if ENABLED(UBL_G26_MESH_VALIDATION)
943 
-    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
944 
-    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
945 
-    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
946 
-    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
947 
-  #endif
948 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
 953 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
949 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 954 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
950
955

+ 12
- 7
Marlin/example_configurations/Felix/DUAL/Configuration.h ファイルの表示

872 
   // at which point movement will be level to the machine's XY plane.
 872 
   // at which point movement will be level to the machine's XY plane.
873 
   // The height can be set with M420 Z<height>
 873 
   // The height can be set with M420 Z<height>
874 
   #define ENABLE_LEVELING_FADE_HEIGHT
 874 
   #define ENABLE_LEVELING_FADE_HEIGHT
875 
+
876 
+  /**
877 
+   * Enable the G26 Mesh Validation Pattern tool.
878 
+   */
879 
+  //#define G26_MESH_VALIDATION   // Enable G26 mesh validation
880 
+  #if ENABLED(G26_MESH_VALIDATION)
881 
+    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
882 
+    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
883 
+    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
884 
+    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
885 
+  #endif
886 
+
875 
 #endif
 887 
 #endif
876
888
877 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
 889 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
938 
   #define UBL_PROBE_PT_3_X 180
 950 
   #define UBL_PROBE_PT_3_X 180
939 
   #define UBL_PROBE_PT_3_Y 20
 951 
   #define UBL_PROBE_PT_3_Y 20
940
952
941 
-  #define UBL_G26_MESH_VALIDATION   // Enable G26 mesh validation
942 
-  #if ENABLED(UBL_G26_MESH_VALIDATION)
943 
-    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
944 
-    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
945 
-    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
946 
-    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
947 
-  #endif
948 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
 953 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
949 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 954 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
950
955

+ 12
- 7
Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h ファイルの表示

893 
   // at which point movement will be level to the machine's XY plane.
 893 
   // at which point movement will be level to the machine's XY plane.
894 
   // The height can be set with M420 Z<height>
 894 
   // The height can be set with M420 Z<height>
895 
   #define ENABLE_LEVELING_FADE_HEIGHT
 895 
   #define ENABLE_LEVELING_FADE_HEIGHT
896 
+
897 
+  /**
898 
+   * Enable the G26 Mesh Validation Pattern tool.
899 
+   */
900 
+  //#define G26_MESH_VALIDATION   // Enable G26 mesh validation
901 
+  #if ENABLED(G26_MESH_VALIDATION)
902 
+    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
903 
+    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
904 
+    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
905 
+    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
906 
+  #endif
907 
+
896 
 #endif
 908 
 #endif
897
909
898 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
 910 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
961 
   #define UBL_PROBE_PT_3_X 180
 973 
   #define UBL_PROBE_PT_3_X 180
962 
   #define UBL_PROBE_PT_3_Y 25
 974 
   #define UBL_PROBE_PT_3_Y 25
963
975
964 
-  #define UBL_G26_MESH_VALIDATION   // Enable G26 mesh validation
965 
-  #if ENABLED(UBL_G26_MESH_VALIDATION)
966 
-    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
967 
-    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
968 
-    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
969 
-    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
970 
-  #endif
971 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
 976 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
972 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 977 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
973
978

+ 12
- 7
Marlin/example_configurations/Geeetech/GT2560/Configuration.h ファイルの表示

905 
   // at which point movement will be level to the machine's XY plane.
 905 
   // at which point movement will be level to the machine's XY plane.
906 
   // The height can be set with M420 Z<height>
 906 
   // The height can be set with M420 Z<height>
907 
   #define ENABLE_LEVELING_FADE_HEIGHT
 907 
   #define ENABLE_LEVELING_FADE_HEIGHT
908 
+
909 
+  /**
910 
+   * Enable the G26 Mesh Validation Pattern tool.
911 
+   */
912 
+  //#define G26_MESH_VALIDATION   // Enable G26 mesh validation
913 
+  #if ENABLED(G26_MESH_VALIDATION)
914 
+    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
915 
+    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
916 
+    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
917 
+    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
918 
+  #endif
919 
+
908 
 #endif
 920 
 #endif
909
921
910 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
 922 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
971 
   #define UBL_PROBE_PT_3_X 180
 983 
   #define UBL_PROBE_PT_3_X 180
972 
   #define UBL_PROBE_PT_3_Y 20
 984 
   #define UBL_PROBE_PT_3_Y 20
973
985
974 
-  #define UBL_G26_MESH_VALIDATION   // Enable G26 mesh validation
975 
-  #if ENABLED(UBL_G26_MESH_VALIDATION)
976 
-    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
977 
-    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
978 
-    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
979 
-    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
980 
-  #endif
981 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
 986 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
982 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 987 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
983
988

+ 12
- 7
Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h ファイルの表示

890 
   // at which point movement will be level to the machine's XY plane.
 890 
   // at which point movement will be level to the machine's XY plane.
891 
   // The height can be set with M420 Z<height>
 891 
   // The height can be set with M420 Z<height>
892 
   #define ENABLE_LEVELING_FADE_HEIGHT
 892 
   #define ENABLE_LEVELING_FADE_HEIGHT
893 
+
894 
+  /**
895 
+   * Enable the G26 Mesh Validation Pattern tool.
896 
+   */
897 
+  //#define G26_MESH_VALIDATION   // Enable G26 mesh validation
898 
+  #if ENABLED(G26_MESH_VALIDATION)
899 
+    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
900 
+    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
901 
+    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
902 
+    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
903 
+  #endif
904 
+
893 
 #endif
 905 
 #endif
894
906
895 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
 907 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
956 
   #define UBL_PROBE_PT_3_X 180
 968 
   #define UBL_PROBE_PT_3_X 180
957 
   #define UBL_PROBE_PT_3_Y 20
 969 
   #define UBL_PROBE_PT_3_Y 20
958
970
959 
-  #define UBL_G26_MESH_VALIDATION   // Enable G26 mesh validation
960 
-  #if ENABLED(UBL_G26_MESH_VALIDATION)
961 
-    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
962 
-    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
963 
-    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
964 
-    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
965 
-  #endif
966 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
 971 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
967 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 972 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
968
973

+ 12
- 7
Marlin/example_configurations/Infitary/i3-M508/Configuration.h ファイルの表示

894 
   // at which point movement will be level to the machine's XY plane.
 894 
   // at which point movement will be level to the machine's XY plane.
895 
   // The height can be set with M420 Z<height>
 895 
   // The height can be set with M420 Z<height>
896 
   #define ENABLE_LEVELING_FADE_HEIGHT
 896 
   #define ENABLE_LEVELING_FADE_HEIGHT
897 
+
898 
+  /**
899 
+   * Enable the G26 Mesh Validation Pattern tool.
900 
+   */
901 
+  //#define G26_MESH_VALIDATION   // Enable G26 mesh validation
902 
+  #if ENABLED(G26_MESH_VALIDATION)
903 
+    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
904 
+    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
905 
+    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
906 
+    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
907 
+  #endif
908 
+
897 
 #endif
 909 
 #endif
898
910
899 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
 911 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
960 
   #define UBL_PROBE_PT_3_X 180
 972 
   #define UBL_PROBE_PT_3_X 180
961 
   #define UBL_PROBE_PT_3_Y 20
 973 
   #define UBL_PROBE_PT_3_Y 20
962
974
963 
-  #define UBL_G26_MESH_VALIDATION   // Enable G26 mesh validation
964 
-  #if ENABLED(UBL_G26_MESH_VALIDATION)
965 
-    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
966 
-    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
967 
-    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
968 
-    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
969 
-  #endif
970 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
 975 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
971 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 976 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
972
977

+ 12
- 7
Marlin/example_configurations/Malyan/M150/Configuration.h ファイルの表示

918 
   // at which point movement will be level to the machine's XY plane.
 918 
   // at which point movement will be level to the machine's XY plane.
919 
   // The height can be set with M420 Z<height>
 919 
   // The height can be set with M420 Z<height>
920 
   #define ENABLE_LEVELING_FADE_HEIGHT
 920 
   #define ENABLE_LEVELING_FADE_HEIGHT
921 
+
922 
+  /**
923 
+   * Enable the G26 Mesh Validation Pattern tool.
924 
+   */
925 
+  //#define G26_MESH_VALIDATION   // Enable G26 mesh validation
926 
+  #if ENABLED(G26_MESH_VALIDATION)
927 
+    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
928 
+    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
929 
+    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
930 
+    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
931 
+  #endif
932 
+
921 
 #endif
 933 
 #endif
922
934
923 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
 935 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
984 
   #define UBL_PROBE_PT_3_X 180
 996 
   #define UBL_PROBE_PT_3_X 180
985 
   #define UBL_PROBE_PT_3_Y 20
 997 
   #define UBL_PROBE_PT_3_Y 20
986
998
987 
-  #define UBL_G26_MESH_VALIDATION   // Enable G26 mesh validation
988 
-  #if ENABLED(UBL_G26_MESH_VALIDATION)
989 
-    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
990 
-    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
991 
-    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
992 
-    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
993 
-  #endif
994 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
 999 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
995 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 1000 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
996
1001

+ 12
- 7
Marlin/example_configurations/Micromake/C1/basic/Configuration.h ファイルの表示

894 
   // at which point movement will be level to the machine's XY plane.
 894 
   // at which point movement will be level to the machine's XY plane.
895 
   // The height can be set with M420 Z<height>
 895 
   // The height can be set with M420 Z<height>
896 
   #define ENABLE_LEVELING_FADE_HEIGHT
 896 
   #define ENABLE_LEVELING_FADE_HEIGHT
897 
+
898 
+  /**
899 
+   * Enable the G26 Mesh Validation Pattern tool.
900 
+   */
901 
+  //#define G26_MESH_VALIDATION   // Enable G26 mesh validation
902 
+  #if ENABLED(G26_MESH_VALIDATION)
903 
+    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
904 
+    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
905 
+    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
906 
+    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
907 
+  #endif
908 
+
897 
 #endif
 909 
 #endif
898
910
899 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
 911 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
960 
   #define UBL_PROBE_PT_3_X 180
 972 
   #define UBL_PROBE_PT_3_X 180
961 
   #define UBL_PROBE_PT_3_Y 20
 973 
   #define UBL_PROBE_PT_3_Y 20
962
974
963 
-  //#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation
964 
-  #if ENABLED(UBL_G26_MESH_VALIDATION)
965 
-    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
966 
-    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
967 
-    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
968 
-    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
969 
-  #endif
970 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
 975 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
971 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 976 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
972
977

+ 12
- 7
Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h ファイルの表示

894 
   // at which point movement will be level to the machine's XY plane.
 894 
   // at which point movement will be level to the machine's XY plane.
895 
   // The height can be set with M420 Z<height>
 895 
   // The height can be set with M420 Z<height>
896 
   #define ENABLE_LEVELING_FADE_HEIGHT
 896 
   #define ENABLE_LEVELING_FADE_HEIGHT
897 
+
898 
+  /**
899 
+   * Enable the G26 Mesh Validation Pattern tool.
900 
+   */
901 
+  //#define G26_MESH_VALIDATION   // Enable G26 mesh validation
902 
+  #if ENABLED(G26_MESH_VALIDATION)
903 
+    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
904 
+    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
905 
+    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
906 
+    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
907 
+  #endif
908 
+
897 
 #endif
 909 
 #endif
898
910
899 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
 911 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
960 
   #define UBL_PROBE_PT_3_X 180
 972 
   #define UBL_PROBE_PT_3_X 180
961 
   #define UBL_PROBE_PT_3_Y 20
 973 
   #define UBL_PROBE_PT_3_Y 20
962
974
963 
-  //#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation
964 
-  #if ENABLED(UBL_G26_MESH_VALIDATION)
965 
-    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
966 
-    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
967 
-    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
968 
-    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
969 
-  #endif
970 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
 975 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
971 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 976 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
972
977

+ 12
- 7
Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h ファイルの表示

890 
   // at which point movement will be level to the machine's XY plane.
 890 
   // at which point movement will be level to the machine's XY plane.
891 
   // The height can be set with M420 Z<height>
 891 
   // The height can be set with M420 Z<height>
892 
   #define ENABLE_LEVELING_FADE_HEIGHT
 892 
   #define ENABLE_LEVELING_FADE_HEIGHT
893 
+
894 
+  /**
895 
+   * Enable the G26 Mesh Validation Pattern tool.
896 
+   */
897 
+  //#define G26_MESH_VALIDATION   // Enable G26 mesh validation
898 
+  #if ENABLED(G26_MESH_VALIDATION)
899 
+    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
900 
+    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
901 
+    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
902 
+    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
903 
+  #endif
904 
+
893 
 #endif
 905 
 #endif
894
906
895 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
 907 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
956 
   #define UBL_PROBE_PT_3_X 180
 968 
   #define UBL_PROBE_PT_3_X 180
957 
   #define UBL_PROBE_PT_3_Y 20
 969 
   #define UBL_PROBE_PT_3_Y 20
958
970
959 
-  #define UBL_G26_MESH_VALIDATION   // Enable G26 mesh validation
960 
-  #if ENABLED(UBL_G26_MESH_VALIDATION)
961 
-    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
962 
-    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
963 
-    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
964 
-    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
965 
-  #endif
966 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
 971 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
967 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 972 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
968
973

+ 12
- 7
Marlin/example_configurations/RigidBot/Configuration.h ファイルの表示

888 
   // at which point movement will be level to the machine's XY plane.
 888 
   // at which point movement will be level to the machine's XY plane.
889 
   // The height can be set with M420 Z<height>
 889 
   // The height can be set with M420 Z<height>
890 
   #define ENABLE_LEVELING_FADE_HEIGHT
 890 
   #define ENABLE_LEVELING_FADE_HEIGHT
891 
+
892 
+  /**
893 
+   * Enable the G26 Mesh Validation Pattern tool.
894 
+   */
895 
+  //#define G26_MESH_VALIDATION   // Enable G26 mesh validation
896 
+  #if ENABLED(G26_MESH_VALIDATION)
897 
+    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
898 
+    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
899 
+    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
900 
+    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
901 
+  #endif
902 
+
891 
 #endif
 903 
 #endif
892
904
893 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
 905 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
954 
   #define UBL_PROBE_PT_3_X 180
 966 
   #define UBL_PROBE_PT_3_X 180
955 
   #define UBL_PROBE_PT_3_Y 20
 967 
   #define UBL_PROBE_PT_3_Y 20
956
968
957 
-  #define UBL_G26_MESH_VALIDATION   // Enable G26 mesh validation
958 
-  #if ENABLED(UBL_G26_MESH_VALIDATION)
959 
-    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
960 
-    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
961 
-    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
962 
-    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
963 
-  #endif
964 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
 969 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
965 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 970 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
966
971

+ 12
- 7
Marlin/example_configurations/SCARA/Configuration.h ファイルの表示

902 
   // at which point movement will be level to the machine's XY plane.
 902 
   // at which point movement will be level to the machine's XY plane.
903 
   // The height can be set with M420 Z<height>
 903 
   // The height can be set with M420 Z<height>
904 
   #define ENABLE_LEVELING_FADE_HEIGHT
 904 
   #define ENABLE_LEVELING_FADE_HEIGHT
905 
+
906 
+  /**
907 
+   * Enable the G26 Mesh Validation Pattern tool.
908 
+   */
909 
+  //#define G26_MESH_VALIDATION   // Enable G26 mesh validation
910 
+  #if ENABLED(G26_MESH_VALIDATION)
911 
+    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
912 
+    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
913 
+    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
914 
+    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
915 
+  #endif
916 
+
905 
 #endif
 917 
 #endif
906
918
907 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
 919 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
968 
   #define UBL_PROBE_PT_3_X 180
 980 
   #define UBL_PROBE_PT_3_X 180
969 
   #define UBL_PROBE_PT_3_Y 20
 981 
   #define UBL_PROBE_PT_3_Y 20
970
982
971 
-  #define UBL_G26_MESH_VALIDATION   // Enable G26 mesh validation
972 
-  #if ENABLED(UBL_G26_MESH_VALIDATION)
973 
-    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
974 
-    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
975 
-    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
976 
-    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
977 
-  #endif
978 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
 983 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
979 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 984 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
980
985

+ 12
- 7
Marlin/example_configurations/Sanguinololu/Configuration.h ファイルの表示

921 
   // at which point movement will be level to the machine's XY plane.
 921 
   // at which point movement will be level to the machine's XY plane.
922 
   // The height can be set with M420 Z<height>
 922 
   // The height can be set with M420 Z<height>
923 
   #define ENABLE_LEVELING_FADE_HEIGHT
 923 
   #define ENABLE_LEVELING_FADE_HEIGHT
924 
+
925 
+  /**
926 
+   * Enable the G26 Mesh Validation Pattern tool.
927 
+   */
928 
+  //#define G26_MESH_VALIDATION   // Enable G26 mesh validation
929 
+  #if ENABLED(G26_MESH_VALIDATION)
930 
+    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
931 
+    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
932 
+    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
933 
+    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
934 
+  #endif
935 
+
924 
 #endif
 936 
 #endif
925
937
926 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
 938 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
987 
   #define UBL_PROBE_PT_3_X 180
 999 
   #define UBL_PROBE_PT_3_X 180
988 
   #define UBL_PROBE_PT_3_Y 20
 1000 
   #define UBL_PROBE_PT_3_Y 20
989
1001
990 
-  //#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation
991 
-  #if ENABLED(UBL_G26_MESH_VALIDATION)
992 
-    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
993 
-    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
994 
-    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
995 
-    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
996 
-  #endif
997 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
 1002 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
998 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 1003 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
999
1004

+ 12
- 7
Marlin/example_configurations/TinyBoy2/Configuration.h ファイルの表示

946 
   // at which point movement will be level to the machine's XY plane.
 946 
   // at which point movement will be level to the machine's XY plane.
947 
   // The height can be set with M420 Z<height>
 947 
   // The height can be set with M420 Z<height>
948 
   #define ENABLE_LEVELING_FADE_HEIGHT
 948 
   #define ENABLE_LEVELING_FADE_HEIGHT
949 
+
950 
+  /**
951 
+   * Enable the G26 Mesh Validation Pattern tool.
952 
+   */
953 
+  //#define G26_MESH_VALIDATION   // Enable G26 mesh validation
954 
+  #if ENABLED(G26_MESH_VALIDATION)
955 
+    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
956 
+    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
957 
+    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
958 
+    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
959 
+  #endif
960 
+
949 
 #endif
 961 
 #endif
950
962
951 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
 963 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
1012 
   #define UBL_PROBE_PT_3_X 180
 1024 
   #define UBL_PROBE_PT_3_X 180
1013 
   #define UBL_PROBE_PT_3_Y 20
 1025 
   #define UBL_PROBE_PT_3_Y 20
1014
1026
1015 
-  #define UBL_G26_MESH_VALIDATION   // Enable G26 mesh validation
1016 
-  #if ENABLED(UBL_G26_MESH_VALIDATION)
1017 
-    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
1018 
-    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
1019 
-    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
1020 
-    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
1021 
-  #endif
1022 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
 1027 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
1023 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 1028 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
1024
1029

+ 12
- 7
Marlin/example_configurations/Velleman/K8200/Configuration.h ファイルの表示

920 
   // at which point movement will be level to the machine's XY plane.
 920 
   // at which point movement will be level to the machine's XY plane.
921 
   // The height can be set with M420 Z<height>
 921 
   // The height can be set with M420 Z<height>
922 
   #define ENABLE_LEVELING_FADE_HEIGHT
 922 
   #define ENABLE_LEVELING_FADE_HEIGHT
923 
+
924 
+  /**
925 
+   * Enable the G26 Mesh Validation Pattern tool.
926 
+   */
927 
+  //#define G26_MESH_VALIDATION   // Enable G26 mesh validation
928 
+  #if ENABLED(G26_MESH_VALIDATION)
929 
+    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
930 
+    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
931 
+    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
932 
+    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
933 
+  #endif
934 
+
923 
 #endif
 935 
 #endif
924
936
925 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
 937 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
986 
   #define UBL_PROBE_PT_3_X 180
 998 
   #define UBL_PROBE_PT_3_X 180
987 
   #define UBL_PROBE_PT_3_Y 20
 999 
   #define UBL_PROBE_PT_3_Y 20
988
1000
989 
-  #define UBL_G26_MESH_VALIDATION   // Enable G26 mesh validation
990 
-  #if ENABLED(UBL_G26_MESH_VALIDATION)
991 
-    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
992 
-    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
993 
-    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
994 
-    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
995 
-  #endif
996 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
 1001 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
997 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 1002 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
998
1003

+ 12
- 7
Marlin/example_configurations/Velleman/K8400/Configuration.h ファイルの表示

890 
   // at which point movement will be level to the machine's XY plane.
 890 
   // at which point movement will be level to the machine's XY plane.
891 
   // The height can be set with M420 Z<height>
 891 
   // The height can be set with M420 Z<height>
892 
   #define ENABLE_LEVELING_FADE_HEIGHT
 892 
   #define ENABLE_LEVELING_FADE_HEIGHT
893 
+
894 
+  /**
895 
+   * Enable the G26 Mesh Validation Pattern tool.
896 
+   */
897 
+  //#define G26_MESH_VALIDATION   // Enable G26 mesh validation
898 
+  #if ENABLED(G26_MESH_VALIDATION)
899 
+    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
900 
+    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
901 
+    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
902 
+    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
903 
+  #endif
904 
+
893 
 #endif
 905 
 #endif
894
906
895 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
 907 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
956 
   #define UBL_PROBE_PT_3_X 180
 968 
   #define UBL_PROBE_PT_3_X 180
957 
   #define UBL_PROBE_PT_3_Y 20
 969 
   #define UBL_PROBE_PT_3_Y 20
958
970
959 
-  #define UBL_G26_MESH_VALIDATION   // Enable G26 mesh validation
960 
-  #if ENABLED(UBL_G26_MESH_VALIDATION)
961 
-    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
962 
-    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
963 
-    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
964 
-    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
965 
-  #endif
966 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
 971 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
967 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 972 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
968
973

+ 12
- 7
Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h ファイルの表示

890 
   // at which point movement will be level to the machine's XY plane.
 890 
   // at which point movement will be level to the machine's XY plane.
891 
   // The height can be set with M420 Z<height>
 891 
   // The height can be set with M420 Z<height>
892 
   #define ENABLE_LEVELING_FADE_HEIGHT
 892 
   #define ENABLE_LEVELING_FADE_HEIGHT
893 
+
894 
+  /**
895 
+   * Enable the G26 Mesh Validation Pattern tool.
896 
+   */
897 
+  //#define G26_MESH_VALIDATION   // Enable G26 mesh validation
898 
+  #if ENABLED(G26_MESH_VALIDATION)
899 
+    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
900 
+    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
901 
+    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
902 
+    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
903 
+  #endif
904 
+
893 
 #endif
 905 
 #endif
894
906
895 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
 907 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
956 
   #define UBL_PROBE_PT_3_X 180
 968 
   #define UBL_PROBE_PT_3_X 180
957 
   #define UBL_PROBE_PT_3_Y 20
 969 
   #define UBL_PROBE_PT_3_Y 20
958
970
959 
-  #define UBL_G26_MESH_VALIDATION   // Enable G26 mesh validation
960 
-  #if ENABLED(UBL_G26_MESH_VALIDATION)
961 
-    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
962 
-    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
963 
-    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
964 
-    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
965 
-  #endif
966 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
 971 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
967 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 972 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
968
973

+ 12
- 7
Marlin/example_configurations/adafruit/ST7565/Configuration.h ファイルの表示

890 
   // at which point movement will be level to the machine's XY plane.
 890 
   // at which point movement will be level to the machine's XY plane.
891 
   // The height can be set with M420 Z<height>
 891 
   // The height can be set with M420 Z<height>
892 
   #define ENABLE_LEVELING_FADE_HEIGHT
 892 
   #define ENABLE_LEVELING_FADE_HEIGHT
893 
+
894 
+  /**
895 
+   * Enable the G26 Mesh Validation Pattern tool.
896 
+   */
897 
+  //#define G26_MESH_VALIDATION   // Enable G26 mesh validation
898 
+  #if ENABLED(G26_MESH_VALIDATION)
899 
+    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
900 
+    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
901 
+    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
902 
+    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
903 
+  #endif
904 
+
893 
 #endif
 905 
 #endif
894
906
895 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
 907 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
956 
   #define UBL_PROBE_PT_3_X 180
 968 
   #define UBL_PROBE_PT_3_X 180
957 
   #define UBL_PROBE_PT_3_Y 20
 969 
   #define UBL_PROBE_PT_3_Y 20
958
970
959 
-  #define UBL_G26_MESH_VALIDATION   // Enable G26 mesh validation
960 
-  #if ENABLED(UBL_G26_MESH_VALIDATION)
961 
-    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
962 
-    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
963 
-    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
964 
-    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
965 
-  #endif
966 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
 971 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
967 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 972 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
968
973

+ 12
- 7
Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h ファイルの表示

1020 
   // at which point movement will be level to the machine's XY plane.
 1020 
   // at which point movement will be level to the machine's XY plane.
1021 
   // The height can be set with M420 Z<height>
 1021 
   // The height can be set with M420 Z<height>
1022 
   //#define ENABLE_LEVELING_FADE_HEIGHT
 1022 
   //#define ENABLE_LEVELING_FADE_HEIGHT
1023 
+
1024 
+  /**
1025 
+   * Enable the G26 Mesh Validation Pattern tool.
1026 
+   */
1027 
+  //#define G26_MESH_VALIDATION   // Enable G26 mesh validation
1028 
+  #if ENABLED(G26_MESH_VALIDATION)
1029 
+    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
1030 
+    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
1031 
+    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
1032 
+    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
1033 
+  #endif
1034 
+
1023 
 #endif
 1035 
 #endif
1024
1036
1025 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
 1037 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
1090 
   #define UBL_PROBE_PT_3_X _PX(DELTA_PROBEABLE_RADIUS, 240)
 1102 
   #define UBL_PROBE_PT_3_X _PX(DELTA_PROBEABLE_RADIUS, 240)
1091 
   #define UBL_PROBE_PT_3_Y _PY(DELTA_PROBEABLE_RADIUS, 240)
 1103 
   #define UBL_PROBE_PT_3_Y _PY(DELTA_PROBEABLE_RADIUS, 240)
1092
1104
1093 
-  #define UBL_G26_MESH_VALIDATION   // Enable G26 mesh validation
1094 
-  #if ENABLED(UBL_G26_MESH_VALIDATION)
1095 
-    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
1096 
-    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
1097 
-    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
1098 
-    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
1099 
-  #endif
1100 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
 1105 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
1101 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 1106 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
1102
1107

+ 12
- 7
Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h ファイルの表示

1020 
   // at which point movement will be level to the machine's XY plane.
 1020 
   // at which point movement will be level to the machine's XY plane.
1021 
   // The height can be set with M420 Z<height>
 1021 
   // The height can be set with M420 Z<height>
1022 
   //#define ENABLE_LEVELING_FADE_HEIGHT
 1022 
   //#define ENABLE_LEVELING_FADE_HEIGHT
1023 
+
1024 
+  /**
1025 
+   * Enable the G26 Mesh Validation Pattern tool.
1026 
+   */
1027 
+  //#define G26_MESH_VALIDATION   // Enable G26 mesh validation
1028 
+  #if ENABLED(G26_MESH_VALIDATION)
1029 
+    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
1030 
+    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
1031 
+    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
1032 
+    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
1033 
+  #endif
1034 
+
1023 
 #endif
 1035 
 #endif
1024
1036
1025 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
 1037 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
1084 
   #define UBL_PROBE_PT_3_X _PX(DELTA_PROBEABLE_RADIUS, 240)
 1096 
   #define UBL_PROBE_PT_3_X _PX(DELTA_PROBEABLE_RADIUS, 240)
1085 
   #define UBL_PROBE_PT_3_Y _PY(DELTA_PROBEABLE_RADIUS, 240)
 1097 
   #define UBL_PROBE_PT_3_Y _PY(DELTA_PROBEABLE_RADIUS, 240)
1086
1098
1087 
-  #define UBL_G26_MESH_VALIDATION   // Enable G26 mesh validation
1088 
-  #if ENABLED(UBL_G26_MESH_VALIDATION)
1089 
-    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
1090 
-    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
1091 
-    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
1092 
-    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
1093 
-  #endif
1094 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
 1099 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
1095 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 1100 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
1096
1101

+ 12
- 7
Marlin/example_configurations/delta/generic/Configuration.h ファイルの表示

1011 
   // Set the boundaries for probing (where the probe can reach).
 1011 
   // Set the boundaries for probing (where the probe can reach).
1012 
   #define DELTA_PROBEABLE_RADIUS (DELTA_PRINTABLE_RADIUS - 10)
 1012 
   #define DELTA_PROBEABLE_RADIUS (DELTA_PRINTABLE_RADIUS - 10)
1013
1013
1014 
+
1015 
+  /**
1016 
+   * Enable the G26 Mesh Validation Pattern tool.
1017 
+   */
1018 
+  //#define G26_MESH_VALIDATION   // Enable G26 mesh validation
1019 
+  #if ENABLED(G26_MESH_VALIDATION)
1020 
+    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
1021 
+    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
1022 
+    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
1023 
+    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
1024 
+  #endif
1025 
+
1014 
 #endif
 1026 
 #endif
1015
1027
1016 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
 1028 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
1079 
   #define UBL_PROBE_PT_3_X _PX(DELTA_PROBEABLE_RADIUS, 240)
 1091 
   #define UBL_PROBE_PT_3_X _PX(DELTA_PROBEABLE_RADIUS, 240)
1080 
   #define UBL_PROBE_PT_3_Y _PY(DELTA_PROBEABLE_RADIUS, 240)
 1092 
   #define UBL_PROBE_PT_3_Y _PY(DELTA_PROBEABLE_RADIUS, 240)
1081
1093
1082 
-  #define UBL_G26_MESH_VALIDATION   // Enable G26 mesh validation
1083 
-  #if ENABLED(UBL_G26_MESH_VALIDATION)
1084 
-    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
1085 
-    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
1086 
-    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
1087 
-    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
1088 
-  #endif
1089 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
 1094 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
1090 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 1095 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
1091
1096

+ 12
- 7
Marlin/example_configurations/delta/kossel_mini/Configuration.h ファイルの表示

1014 
   // Set the boundaries for probing (where the probe can reach).
 1014 
   // Set the boundaries for probing (where the probe can reach).
1015 
   #define DELTA_PROBEABLE_RADIUS (DELTA_PRINTABLE_RADIUS - 10)
 1015 
   #define DELTA_PROBEABLE_RADIUS (DELTA_PRINTABLE_RADIUS - 10)
1016
1016
1017 
+
1018 
+  /**
1019 
+   * Enable the G26 Mesh Validation Pattern tool.
1020 
+   */
1021 
+  //#define G26_MESH_VALIDATION   // Enable G26 mesh validation
1022 
+  #if ENABLED(G26_MESH_VALIDATION)
1023 
+    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
1024 
+    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
1025 
+    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
1026 
+    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
1027 
+  #endif
1028 
+
1017 
 #endif
 1029 
 #endif
1018
1030
1019 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
 1031 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
1082 
   #define UBL_PROBE_PT_3_X _PX(DELTA_PROBEABLE_RADIUS, 240)
 1094 
   #define UBL_PROBE_PT_3_X _PX(DELTA_PROBEABLE_RADIUS, 240)
1083 
   #define UBL_PROBE_PT_3_Y _PY(DELTA_PROBEABLE_RADIUS, 240)
 1095 
   #define UBL_PROBE_PT_3_Y _PY(DELTA_PROBEABLE_RADIUS, 240)
1084
1096
1085 
-  #define UBL_G26_MESH_VALIDATION   // Enable G26 mesh validation
1086 
-  #if ENABLED(UBL_G26_MESH_VALIDATION)
1087 
-    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
1088 
-    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
1089 
-    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
1090 
-    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
1091 
-  #endif
1092 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
 1097 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
1093 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 1098 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
1094
1099

+ 12
- 7
Marlin/example_configurations/delta/kossel_pro/Configuration.h ファイルの表示

1014 
   // Set the boundaries for probing (where the probe can reach).
 1014 
   // Set the boundaries for probing (where the probe can reach).
1015 
   #define DELTA_PROBEABLE_RADIUS (DELTA_PRINTABLE_RADIUS - 10)
 1015 
   #define DELTA_PROBEABLE_RADIUS (DELTA_PRINTABLE_RADIUS - 10)
1016
1016
1017 
+
1018 
+  /**
1019 
+   * Enable the G26 Mesh Validation Pattern tool.
1020 
+   */
1021 
+  //#define G26_MESH_VALIDATION   // Enable G26 mesh validation
1022 
+  #if ENABLED(G26_MESH_VALIDATION)
1023 
+    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
1024 
+    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
1025 
+    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
1026 
+    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
1027 
+  #endif
1028 
+
1017 
 #endif
 1029 
 #endif
1018
1030
1019 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
 1031 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
1082 
   #define UBL_PROBE_PT_3_X _PX(DELTA_PROBEABLE_RADIUS, 240)
 1094 
   #define UBL_PROBE_PT_3_X _PX(DELTA_PROBEABLE_RADIUS, 240)
1083 
   #define UBL_PROBE_PT_3_Y _PY(DELTA_PROBEABLE_RADIUS, 240)
 1095 
   #define UBL_PROBE_PT_3_Y _PY(DELTA_PROBEABLE_RADIUS, 240)
1084
1096
1085 
-  #define UBL_G26_MESH_VALIDATION   // Enable G26 mesh validation
1086 
-  #if ENABLED(UBL_G26_MESH_VALIDATION)
1087 
-    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
1088 
-    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
1089 
-    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
1090 
-    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
1091 
-  #endif
1092 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
 1097 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
1093 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 1098 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
1094
1099

+ 12
- 7
Marlin/example_configurations/delta/kossel_xl/Configuration.h ファイルの表示

1023 
   // Set the boundaries for probing (where the probe can reach).
 1023 
   // Set the boundaries for probing (where the probe can reach).
1024 
   #define DELTA_PROBEABLE_RADIUS (DELTA_PRINTABLE_RADIUS - 10)
 1024 
   #define DELTA_PROBEABLE_RADIUS (DELTA_PRINTABLE_RADIUS - 10)
1025
1025
1026 
+
1027 
+  /**
1028 
+   * Enable the G26 Mesh Validation Pattern tool.
1029 
+   */
1030 
+  //#define G26_MESH_VALIDATION   // Enable G26 mesh validation
1031 
+  #if ENABLED(G26_MESH_VALIDATION)
1032 
+    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
1033 
+    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
1034 
+    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
1035 
+    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
1036 
+  #endif
1037 
+
1026 
 #endif
 1038 
 #endif
1027
1039
1028 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
 1040 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
1091 
   #define UBL_PROBE_PT_3_X _PX(DELTA_PROBEABLE_RADIUS, 240)
 1103 
   #define UBL_PROBE_PT_3_X _PX(DELTA_PROBEABLE_RADIUS, 240)
1092 
   #define UBL_PROBE_PT_3_Y _PY(DELTA_PROBEABLE_RADIUS, 240)
 1104 
   #define UBL_PROBE_PT_3_Y _PY(DELTA_PROBEABLE_RADIUS, 240)
1093
1105
1094 
-  #define UBL_G26_MESH_VALIDATION   // Enable G26 mesh validation
1095 
-  #if ENABLED(UBL_G26_MESH_VALIDATION)
1096 
-    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
1097 
-    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
1098 
-    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
1099 
-    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
1100 
-  #endif
1101 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
 1106 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
1102 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 1107 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
1103
1108

+ 12
- 7
Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h ファイルの表示

904 
   // at which point movement will be level to the machine's XY plane.
 904 
   // at which point movement will be level to the machine's XY plane.
905 
   // The height can be set with M420 Z<height>
 905 
   // The height can be set with M420 Z<height>
906 
   #define ENABLE_LEVELING_FADE_HEIGHT
 906 
   #define ENABLE_LEVELING_FADE_HEIGHT
907 
+
908 
+  /**
909 
+   * Enable the G26 Mesh Validation Pattern tool.
910 
+   */
911 
+  //#define G26_MESH_VALIDATION   // Enable G26 mesh validation
912 
+  #if ENABLED(G26_MESH_VALIDATION)
913 
+    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
914 
+    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
915 
+    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
916 
+    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
917 
+  #endif
918 
+
907 
 #endif
 919 
 #endif
908
920
909 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
 921 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
970 
   #define UBL_PROBE_PT_3_X 348
 982 
   #define UBL_PROBE_PT_3_X 348
971 
   #define UBL_PROBE_PT_3_Y 211
 983 
   #define UBL_PROBE_PT_3_Y 211
972
984
973 
-  #define UBL_G26_MESH_VALIDATION   // Enable G26 mesh validation
974 
-  #if ENABLED(UBL_G26_MESH_VALIDATION)
975 
-    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
976 
-    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
977 
-    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
978 
-    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
979 
-  #endif
980 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
 985 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
981 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 986 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
982
987

+ 12
- 7
Marlin/example_configurations/makibox/Configuration.h ファイルの表示

893 
   // at which point movement will be level to the machine's XY plane.
 893 
   // at which point movement will be level to the machine's XY plane.
894 
   // The height can be set with M420 Z<height>
 894 
   // The height can be set with M420 Z<height>
895 
   #define ENABLE_LEVELING_FADE_HEIGHT
 895 
   #define ENABLE_LEVELING_FADE_HEIGHT
896 
+
897 
+  /**
898 
+   * Enable the G26 Mesh Validation Pattern tool.
899 
+   */
900 
+  //#define G26_MESH_VALIDATION   // Enable G26 mesh validation
901 
+  #if ENABLED(G26_MESH_VALIDATION)
902 
+    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
903 
+    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
904 
+    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
905 
+    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
906 
+  #endif
907 
+
896 
 #endif
 908 
 #endif
897
909
898 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
 910 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
959 
   #define UBL_PROBE_PT_3_X 180
 971 
   #define UBL_PROBE_PT_3_X 180
960 
   #define UBL_PROBE_PT_3_Y 20
 972 
   #define UBL_PROBE_PT_3_Y 20
961
973
962 
-  #define UBL_G26_MESH_VALIDATION   // Enable G26 mesh validation
963 
-  #if ENABLED(UBL_G26_MESH_VALIDATION)
964 
-    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
965 
-    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
966 
-    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
967 
-    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
968 
-  #endif
969 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
 974 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
970 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 975 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
971
976

+ 12
- 7
Marlin/example_configurations/tvrrug/Round2/Configuration.h ファイルの表示

885 
   // at which point movement will be level to the machine's XY plane.
 885 
   // at which point movement will be level to the machine's XY plane.
886 
   // The height can be set with M420 Z<height>
 886 
   // The height can be set with M420 Z<height>
887 
   #define ENABLE_LEVELING_FADE_HEIGHT
 887 
   #define ENABLE_LEVELING_FADE_HEIGHT
888 
+
889 
+  /**
890 
+   * Enable the G26 Mesh Validation Pattern tool.
891 
+   */
892 
+  //#define G26_MESH_VALIDATION   // Enable G26 mesh validation
893 
+  #if ENABLED(G26_MESH_VALIDATION)
894 
+    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
895 
+    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
896 
+    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
897 
+    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
898 
+  #endif
899 
+
888 
 #endif
 900 
 #endif
889
901
890 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
 902 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
951 
   #define UBL_PROBE_PT_3_X 180
 963 
   #define UBL_PROBE_PT_3_X 180
952 
   #define UBL_PROBE_PT_3_Y 20
 964 
   #define UBL_PROBE_PT_3_Y 20
953
965
954 
-  #define UBL_G26_MESH_VALIDATION   // Enable G26 mesh validation
955 
-  #if ENABLED(UBL_G26_MESH_VALIDATION)
956 
-    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
957 
-    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
958 
-    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
959 
-    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
960 
-  #endif
961 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
 966 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
962 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 967 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
963
968

+ 12
- 7
Marlin/example_configurations/wt150/Configuration.h ファイルの表示

895 
   // at which point movement will be level to the machine's XY plane.
 895 
   // at which point movement will be level to the machine's XY plane.
896 
   // The height can be set with M420 Z<height>
 896 
   // The height can be set with M420 Z<height>
897 
   #define ENABLE_LEVELING_FADE_HEIGHT
 897 
   #define ENABLE_LEVELING_FADE_HEIGHT
898 
+
899 
+  /**
900 
+   * Enable the G26 Mesh Validation Pattern tool.
901 
+   */
902 
+  //#define G26_MESH_VALIDATION   // Enable G26 mesh validation
903 
+  #if ENABLED(G26_MESH_VALIDATION)
904 
+    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
905 
+    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
906 
+    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
907 
+    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
908 
+  #endif
909 
+
898 
 #endif
 910 
 #endif
899
911
900 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
 912 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
961 
   #define UBL_PROBE_PT_3_X 180
 973 
   #define UBL_PROBE_PT_3_X 180
962 
   #define UBL_PROBE_PT_3_Y 20
 974 
   #define UBL_PROBE_PT_3_Y 20
963
975
964 
-  #define UBL_G26_MESH_VALIDATION   // Enable G26 mesh validation
965 
-  #if ENABLED(UBL_G26_MESH_VALIDATION)
966 
-    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
967 
-    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
968 
-    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
969 
-    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
970 
-  #endif
971 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
 976 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
972 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 977 
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
973
978

書き込み プレビュー
読み込み中…
キャンセル
保存