thomas
/
marlin
Obserwuj 1
Gwiazdka 0
Forkuj 0
Kod Problemy 0 Pull Requests 0 Wydania 0 Wiki Aktywność
Przeglądaj źródła

Clean up BABYSTEP options

Scott Lahteine 6 lat temu
rodzic
8ae113ff36
commit
e78bdd654d
56 zmienionych plików z 728 dodań i 504 usunięć
Widok podzielony Pokaż statystyki zmian
  1. 13
    9
      Marlin/Configuration_adv.h
  2. 13
    9
      Marlin/src/config/default/Configuration_adv.h
  3. 13
    9
      Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
  4. 13
    9
      Marlin/src/config/examples/Anet/A2/Configuration_adv.h
  5. 13
    9
      Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h
  6. 13
    9
      Marlin/src/config/examples/Anet/A6/Configuration_adv.h
  7. 13
    9
      Marlin/src/config/examples/Anet/A8/Configuration_adv.h
  8. 13
    9
      Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
  9. 13
    9
      Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h
  10. 13
    9
      Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
  11. 13
    9
      Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
  12. 13
    9
      Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
  13. 13
    9
      Marlin/src/config/examples/Cartesio/Configuration_adv.h
  14. 13
    9
      Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
  15. 13
    9
      Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
  16. 13
    9
      Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h
  17. 13
    9
      Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h
  18. 13
    9
      Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h
  19. 13
    9
      Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h
  20. 13
    9
      Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h
  21. 13
    9
      Marlin/src/config/examples/Einstart-S/Configuration_adv.h
  22. 13
    9
      Marlin/src/config/examples/Felix/Configuration_adv.h
  23. 13
    9
      Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
  24. 13
    9
      Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h
  25. 13
    9
      Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
  26. 13
    9
      Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h
  27. 13
    9
      Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
  28. 13
    9
      Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
  29. 13
    9
      Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
  30. 13
    9
      Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
  31. 13
    9
      Marlin/src/config/examples/MakerParts/Configuration_adv.h
  32. 13
    9
      Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
  33. 13
    9
      Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
  34. 13
    9
      Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
  35. 13
    9
      Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
  36. 13
    9
      Marlin/src/config/examples/RigidBot/Configuration_adv.h
  37. 13
    9
      Marlin/src/config/examples/SCARA/Configuration_adv.h
  38. 13
    9
      Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
  39. 13
    9
      Marlin/src/config/examples/TheBorg/Configuration_adv.h
  40. 13
    9
      Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
  41. 13
    9
      Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h
  42. 13
    9
      Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
  43. 13
    9
      Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
  44. 13
    9
      Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
  45. 13
    9
      Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
  46. 13
    9
      Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
  47. 13
    9
      Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
  48. 13
    9
      Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
  49. 13
    9
      Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
  50. 13
    9
      Marlin/src/config/examples/delta/generic/Configuration_adv.h
  51. 13
    9
      Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
  52. 13
    9
      Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
  53. 13
    9
      Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
  54. 13
    9
      Marlin/src/config/examples/makibox/Configuration_adv.h
  55. 13
    9
      Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
  56. 13
    9
      Marlin/src/config/examples/wt150/Configuration_adv.h

+ 13
- 9
Marlin/Configuration_adv.h Wyświetl plik 

@@ -767,16 +767,20 @@
767 767 
  */
768 768 
 //#define BABYSTEPPING
769 769 
 #if ENABLED(BABYSTEPPING)
770 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
771 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
772 
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
773 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
774 
-  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
775 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
776 
-                                        // Note: Extra time may be added to mitigate controller latency.
777 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
770 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
771 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
772 
+  #define BABYSTEP_MULTIPLICATOR  1         // Babysteps are very small. Increase for faster motion.
773 
+
774 
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
775 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
776 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
777 
+                                            // Note: Extra time may be added to mitigate controller latency.
778 
+  #endif
779 
+
780 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
778 781 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
779 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
782 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
783 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
780 784 
   #endif
781 785 
 #endif
782 786

+ 13
- 9
Marlin/src/config/default/Configuration_adv.h Wyświetl plik 

@@ -767,16 +767,20 @@
767 767 
  */
768 768 
 //#define BABYSTEPPING
769 769 
 #if ENABLED(BABYSTEPPING)
770 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
771 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
772 
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
773 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
774 
-  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
775 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
776 
-                                        // Note: Extra time may be added to mitigate controller latency.
777 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
770 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
771 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
772 
+  #define BABYSTEP_MULTIPLICATOR  1         // Babysteps are very small. Increase for faster motion.
773 
+
774 
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
775 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
776 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
777 
+                                            // Note: Extra time may be added to mitigate controller latency.
778 
+  #endif
779 
+
780 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
778 781 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
779 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
782 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
783 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
780 784 
   #endif
781 785 
 #endif
782 786

+ 13
- 9
Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h Wyświetl plik 

@@ -767,16 +767,20 @@
767 767 
  */
768 768 
 //#define BABYSTEPPING
769 769 
 #if ENABLED(BABYSTEPPING)
770 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
771 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
772 
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
773 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
774 
-  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
775 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
776 
-                                        // Note: Extra time may be added to mitigate controller latency.
777 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
770 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
771 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
772 
+  #define BABYSTEP_MULTIPLICATOR  1         // Babysteps are very small. Increase for faster motion.
773 
+
774 
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
775 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
776 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
777 
+                                            // Note: Extra time may be added to mitigate controller latency.
778 
+  #endif
779 
+
780 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
778 781 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
779 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
782 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
783 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
780 784 
   #endif
781 785 
 #endif
782 786

+ 13
- 9
Marlin/src/config/examples/Anet/A2/Configuration_adv.h Wyświetl plik 

@@ -767,16 +767,20 @@
767 767 
  */
768 768 
 #define BABYSTEPPING
769 769 
 #if ENABLED(BABYSTEPPING)
770 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
771 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
772 
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
773 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
774 
-  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
775 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
776 
-                                        // Note: Extra time may be added to mitigate controller latency.
777 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
770 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
771 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
772 
+  #define BABYSTEP_MULTIPLICATOR  1         // Babysteps are very small. Increase for faster motion.
773 
+
774 
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
775 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
776 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
777 
+                                            // Note: Extra time may be added to mitigate controller latency.
778 
+  #endif
779 
+
780 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
778 781 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
779 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
782 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
783 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
780 784 
   #endif
781 785 
 #endif
782 786

+ 13
- 9
Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h Wyświetl plik 

@@ -767,16 +767,20 @@
767 767 
  */
768 768 
 #define BABYSTEPPING
769 769 
 #if ENABLED(BABYSTEPPING)
770 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
771 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
772 
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
773 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
774 
-  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
775 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
776 
-                                        // Note: Extra time may be added to mitigate controller latency.
777 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
770 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
771 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
772 
+  #define BABYSTEP_MULTIPLICATOR  1         // Babysteps are very small. Increase for faster motion.
773 
+
774 
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
775 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
776 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
777 
+                                            // Note: Extra time may be added to mitigate controller latency.
778 
+  #endif
779 
+
780 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
778 781 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
779 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
782 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
783 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
780 784 
   #endif
781 785 
 #endif
782 786

+ 13
- 9
Marlin/src/config/examples/Anet/A6/Configuration_adv.h Wyświetl plik 

@@ -767,16 +767,20 @@
767 767 
  */
768 768 
 #define BABYSTEPPING
769 769 
 #if ENABLED(BABYSTEPPING)
770 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
771 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
772 
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
773 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
774 
-  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
775 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
776 
-                                        // Note: Extra time may be added to mitigate controller latency.
777 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
770 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
771 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
772 
+  #define BABYSTEP_MULTIPLICATOR  1         // Babysteps are very small. Increase for faster motion.
773 
+
774 
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
775 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
776 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
777 
+                                            // Note: Extra time may be added to mitigate controller latency.
778 
+  #endif
779 
+
780 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
778 781 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
779 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
782 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
783 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
780 784 
   #endif
781 785 
 #endif
782 786

+ 13
- 9
Marlin/src/config/examples/Anet/A8/Configuration_adv.h Wyświetl plik 

@@ -767,16 +767,20 @@
767 767 
  */
768 768 
 #define BABYSTEPPING
769 769 
 #if ENABLED(BABYSTEPPING)
770 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
771 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
772 
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
773 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
774 
-  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
775 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
776 
-                                        // Note: Extra time may be added to mitigate controller latency.
777 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
770 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
771 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
772 
+  #define BABYSTEP_MULTIPLICATOR  1         // Babysteps are very small. Increase for faster motion.
773 
+
774 
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
775 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
776 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
777 
+                                            // Note: Extra time may be added to mitigate controller latency.
778 
+  #endif
779 
+
780 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
778 781 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
779 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
782 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
783 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
780 784 
   #endif
781 785 
 #endif
782 786

+ 13
- 9
Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h Wyświetl plik 

@@ -767,16 +767,20 @@
767 767 
  */
768 768 
 //#define BABYSTEPPING
769 769 
 #if ENABLED(BABYSTEPPING)
770 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
771 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
772 
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
773 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
774 
-  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
775 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
776 
-                                        // Note: Extra time may be added to mitigate controller latency.
777 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
770 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
771 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
772 
+  #define BABYSTEP_MULTIPLICATOR  1         // Babysteps are very small. Increase for faster motion.
773 
+
774 
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
775 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
776 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
777 
+                                            // Note: Extra time may be added to mitigate controller latency.
778 
+  #endif
779 
+
780 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
778 781 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
779 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
782 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
783 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
780 784 
   #endif
781 785 
 #endif
782 786

+ 13
- 9
Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h Wyświetl plik 

@@ -767,16 +767,20 @@
767 767 
  */
768 768 
 //#define BABYSTEPPING
769 769 
 #if ENABLED(BABYSTEPPING)
770 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
771 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
772 
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
773 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
774 
-  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
775 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
776 
-                                        // Note: Extra time may be added to mitigate controller latency.
777 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
770 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
771 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
772 
+  #define BABYSTEP_MULTIPLICATOR  1         // Babysteps are very small. Increase for faster motion.
773 
+
774 
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
775 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
776 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
777 
+                                            // Note: Extra time may be added to mitigate controller latency.
778 
+  #endif
779 
+
780 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
778 781 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
779 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
782 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
783 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
780 784 
   #endif
781 785 
 #endif
782 786

+ 13
- 9
Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h Wyświetl plik 

@@ -767,16 +767,20 @@
767 767 
  */
768 768 
 //#define BABYSTEPPING
769 769 
 #if ENABLED(BABYSTEPPING)
770 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
771 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
772 
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
773 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
774 
-  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
775 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
776 
-                                        // Note: Extra time may be added to mitigate controller latency.
777 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
770 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
771 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
772 
+  #define BABYSTEP_MULTIPLICATOR  1         // Babysteps are very small. Increase for faster motion.
773 
+
774 
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
775 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
776 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
777 
+                                            // Note: Extra time may be added to mitigate controller latency.
778 
+  #endif
779 
+
780 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
778 781 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
779 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
782 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
783 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
780 784 
   #endif
781 785 
 #endif
782 786

+ 13
- 9
Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h Wyświetl plik 

@@ -775,16 +775,20 @@
775 775 
  */
776 776 
 #define BABYSTEPPING
777 777 
 #if ENABLED(BABYSTEPPING)
778 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
779 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
780 
-  #define BABYSTEP_MULTIPLICATOR 2   // Babysteps are very small. Increase for faster motion.
781 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
782 
-  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
783 
-  #define DOUBLECLICK_MAX_INTERVAL 1500 // Maximum interval between clicks, in milliseconds.
784 
-                                        // Note: Extra time may be added to mitigate controller latency.
785 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
778 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
779 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
780 
+  #define BABYSTEP_MULTIPLICATOR  2         // Babysteps are very small. Increase for faster motion.
781 
+
782 
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
783 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
784 
+    #define DOUBLECLICK_MAX_INTERVAL 1500   // Maximum interval between clicks, in milliseconds.
785 
+                                            // Note: Extra time may be added to mitigate controller latency.
786 
+  #endif
787 
+
788 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
786 789 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
787 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
790 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
791 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
788 792 
   #endif
789 793 
 #endif
790 794

+ 13
- 9
Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h Wyświetl plik 

@@ -767,16 +767,20 @@
767 767 
  */
768 768 
 //#define BABYSTEPPING
769 769 
 #if ENABLED(BABYSTEPPING)
770 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
771 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
772 
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
773 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
774 
-  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
775 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
776 
-                                        // Note: Extra time may be added to mitigate controller latency.
777 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
770 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
771 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
772 
+  #define BABYSTEP_MULTIPLICATOR  1         // Babysteps are very small. Increase for faster motion.
773 
+
774 
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
775 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
776 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
777 
+                                            // Note: Extra time may be added to mitigate controller latency.
778 
+  #endif
779 
+
780 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
778 781 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
779 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
782 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
783 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
780 784 
   #endif
781 785 
 #endif
782 786

+ 13
- 9
Marlin/src/config/examples/Cartesio/Configuration_adv.h Wyświetl plik 

@@ -767,16 +767,20 @@
767 767 
  */
768 768 
 //#define BABYSTEPPING
769 769 
 #if ENABLED(BABYSTEPPING)
770 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
771 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
772 
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
773 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
774 
-  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
775 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
776 
-                                        // Note: Extra time may be added to mitigate controller latency.
777 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
770 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
771 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
772 
+  #define BABYSTEP_MULTIPLICATOR  1         // Babysteps are very small. Increase for faster motion.
773 
+
774 
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
775 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
776 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
777 
+                                            // Note: Extra time may be added to mitigate controller latency.
778 
+  #endif
779 
+
780 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
778 781 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
779 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
782 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
783 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
780 784 
   #endif
781 785 
 #endif
782 786

+ 13
- 9
Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h Wyświetl plik 

@@ -767,16 +767,20 @@
767 767 
  */
768 768 
 #define BABYSTEPPING
769 769 
 #if ENABLED(BABYSTEPPING)
770 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
771 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
772 
-  #define BABYSTEP_MULTIPLICATOR  10 // Babysteps are very small. Increase for faster motion.
773 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
774 
-  #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
775 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
776 
-                                        // Note: Extra time may be added to mitigate controller latency.
777 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
770 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
771 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
772 
+  #define BABYSTEP_MULTIPLICATOR 10         // Babysteps are very small. Increase for faster motion.
773 
+
774 
+  #define DOUBLECLICK_FOR_Z_BABYSTEPPING    // Double-click on the Status Screen for Z Babystepping.
775 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
776 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
777 
+                                            // Note: Extra time may be added to mitigate controller latency.
778 
+  #endif
779 
+
780 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
778 781 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
779 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
782 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
783 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
780 784 
   #endif
781 785 
 #endif
782 786

+ 13
- 9
Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h Wyświetl plik 

@@ -767,16 +767,20 @@
767 767 
  */
768 768 
 #define BABYSTEPPING
769 769 
 #if ENABLED(BABYSTEPPING)
770 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
771 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
772 
-  #define BABYSTEP_MULTIPLICATOR 5   // Babysteps are very small. Increase for faster motion.
773 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
774 
-  #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
775 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
776 
-                                        // Note: Extra time may be added to mitigate controller latency.
777 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
770 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
771 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
772 
+  #define BABYSTEP_MULTIPLICATOR  5         // Babysteps are very small. Increase for faster motion.
773 
+
774 
+  #define DOUBLECLICK_FOR_Z_BABYSTEPPING    // Double-click on the Status Screen for Z Babystepping.
775 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
776 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
777 
+                                            // Note: Extra time may be added to mitigate controller latency.
778 
+  #endif
779 
+
780 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
778 781 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
779 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
782 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
783 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
780 784 
   #endif
781 785 
 #endif
782 786

+ 13
- 9
Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h Wyświetl plik 

@@ -767,16 +767,20 @@
767 767 
  */
768 768 
 #define BABYSTEPPING
769 769 
 #if ENABLED(BABYSTEPPING)
770 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
771 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
772 
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
773 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
774 
-  #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
775 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
776 
-                                        // Note: Extra time may be added to mitigate controller latency.
777 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
770 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
771 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
772 
+  #define BABYSTEP_MULTIPLICATOR  1         // Babysteps are very small. Increase for faster motion.
773 
+
774 
+  #define DOUBLECLICK_FOR_Z_BABYSTEPPING    // Double-click on the Status Screen for Z Babystepping.
775 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
776 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
777 
+                                            // Note: Extra time may be added to mitigate controller latency.
778 
+  #endif
779 
+
780 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
778 781 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
779 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
782 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
783 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
780 784 
   #endif
781 785 
 #endif
782 786

+ 13
- 9
Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h Wyświetl plik 

@@ -767,16 +767,20 @@
767 767 
  */
768 768 
 #define BABYSTEPPING
769 769 
 #if ENABLED(BABYSTEPPING)
770 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
771 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
772 
-  #define BABYSTEP_MULTIPLICATOR 5   // Babysteps are very small. Increase for faster motion.
773 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
774 
-  #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
775 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
776 
-                                        // Note: Extra time may be added to mitigate controller latency.
777 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
770 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
771 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
772 
+  #define BABYSTEP_MULTIPLICATOR  5         // Babysteps are very small. Increase for faster motion.
773 
+
774 
+  #define DOUBLECLICK_FOR_Z_BABYSTEPPING    // Double-click on the Status Screen for Z Babystepping.
775 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
776 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
777 
+                                            // Note: Extra time may be added to mitigate controller latency.
778 
+  #endif
779 
+
780 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
778 781 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
779 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
782 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
783 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
780 784 
   #endif
781 785 
 #endif
782 786

+ 13
- 9
Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h Wyświetl plik 

@@ -767,16 +767,20 @@
767 767 
  */
768 768 
 //#define BABYSTEPPING
769 769 
 #if ENABLED(BABYSTEPPING)
770 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
771 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
772 
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
773 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
774 
-  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
775 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
776 
-                                        // Note: Extra time may be added to mitigate controller latency.
777 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
770 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
771 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
772 
+  #define BABYSTEP_MULTIPLICATOR  1         // Babysteps are very small. Increase for faster motion.
773 
+
774 
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
775 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
776 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
777 
+                                            // Note: Extra time may be added to mitigate controller latency.
778 
+  #endif
779 
+
780 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
778 781 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
779 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
782 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
783 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
780 784 
   #endif
781 785 
 #endif
782 786

+ 13
- 9
Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h Wyświetl plik 

@@ -767,16 +767,20 @@
767 767 
  */
768 768 
 #define BABYSTEPPING
769 769 
 #if ENABLED(BABYSTEPPING)
770 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
771 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
772 
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
773 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
774 
-  #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
775 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
776 
-                                        // Note: Extra time may be added to mitigate controller latency.
777 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
770 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
771 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
772 
+  #define BABYSTEP_MULTIPLICATOR  1         // Babysteps are very small. Increase for faster motion.
773 
+
774 
+  #define DOUBLECLICK_FOR_Z_BABYSTEPPING    // Double-click on the Status Screen for Z Babystepping.
775 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
776 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
777 
+                                            // Note: Extra time may be added to mitigate controller latency.
778 
+  #endif
779 
+
780 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
778 781 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
779 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
782 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
783 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
780 784 
   #endif
781 785 
 #endif
782 786

+ 13
- 9
Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h Wyświetl plik 

@@ -767,16 +767,20 @@
767 767 
  */
768 768 
 #define BABYSTEPPING
769 769 
 #if ENABLED(BABYSTEPPING)
770 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
771 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
772 
-  #define BABYSTEP_MULTIPLICATOR 5   // Babysteps are very small. Increase for faster motion.
773 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
774 
-  #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
775 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
776 
-                                        // Note: Extra time may be added to mitigate controller latency.
777 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
770 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
771 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
772 
+  #define BABYSTEP_MULTIPLICATOR  5         // Babysteps are very small. Increase for faster motion.
773 
+
774 
+  #define DOUBLECLICK_FOR_Z_BABYSTEPPING    // Double-click on the Status Screen for Z Babystepping.
775 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
776 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
777 
+                                            // Note: Extra time may be added to mitigate controller latency.
778 
+  #endif
779 
+
780 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
778 781 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
779 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
782 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
783 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
780 784 
   #endif
781 785 
 #endif
782 786

+ 13
- 9
Marlin/src/config/examples/Einstart-S/Configuration_adv.h Wyświetl plik 

@@ -767,16 +767,20 @@
767 767 
  */
768 768 
 //#define BABYSTEPPING
769 769 
 #if ENABLED(BABYSTEPPING)
770 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
771 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
772 
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
773 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
774 
-  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
775 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
776 
-                                        // Note: Extra time may be added to mitigate controller latency.
777 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
770 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
771 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
772 
+  #define BABYSTEP_MULTIPLICATOR  1         // Babysteps are very small. Increase for faster motion.
773 
+
774 
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
775 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
776 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
777 
+                                            // Note: Extra time may be added to mitigate controller latency.
778 
+  #endif
779 
+
780 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
778 781 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
779 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
782 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
783 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
780 784 
   #endif
781 785 
 #endif
782 786

+ 13
- 9
Marlin/src/config/examples/Felix/Configuration_adv.h Wyświetl plik 

@@ -767,16 +767,20 @@
767 767 
  */
768 768 
 //#define BABYSTEPPING
769 769 
 #if ENABLED(BABYSTEPPING)
770 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
771 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
772 
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
773 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
774 
-  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
775 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
776 
-                                        // Note: Extra time may be added to mitigate controller latency.
777 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
770 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
771 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
772 
+  #define BABYSTEP_MULTIPLICATOR  1         // Babysteps are very small. Increase for faster motion.
773 
+
774 
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
775 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
776 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
777 
+                                            // Note: Extra time may be added to mitigate controller latency.
778 
+  #endif
779 
+
780 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
778 781 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
779 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
782 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
783 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
780 784 
   #endif
781 785 
 #endif
782 786

+ 13
- 9
Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h Wyświetl plik 

@@ -767,16 +767,20 @@
767 767 
  */
768 768 
 #define BABYSTEPPING
769 769 
 #if ENABLED(BABYSTEPPING)
770 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
771 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
772 
-  #define BABYSTEP_MULTIPLICATOR   2 // Babysteps are very small. Increase for faster motion.
773 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
774 
-  #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
775 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
776 
-                                        // Note: Extra time may be added to mitigate controller latency.
777 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
770 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
771 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
772 
+  #define BABYSTEP_MULTIPLICATOR  2         // Babysteps are very small. Increase for faster motion.
773 
+
774 
+  #define DOUBLECLICK_FOR_Z_BABYSTEPPING    // Double-click on the Status Screen for Z Babystepping.
775 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
776 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
777 
+                                            // Note: Extra time may be added to mitigate controller latency.
778 
+  #endif
779 
+
780 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
778 781 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
779 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
782 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
783 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
780 784 
   #endif
781 785 
 #endif
782 786

+ 13
- 9
Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h Wyświetl plik 

@@ -767,16 +767,20 @@
767 767 
  */
768 768 
 #define BABYSTEPPING
769 769 
 #if ENABLED(BABYSTEPPING)
770 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
771 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
772 
-  #define BABYSTEP_MULTIPLICATOR 25  // Babysteps are very small. Increase for faster motion.
773 
-  #define BABYSTEP_ZPROBE_OFFSET     // Combine M851 Z and Babystepping
774 
-  #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
775 
-  #define DOUBLECLICK_MAX_INTERVAL 1250  // Maximum interval between clicks, in milliseconds.
776 
-                                         // Note: Extra time may be added to mitigate controller latency.
777 
-  #define BABYSTEP_ZPROBE_GFX_OVERLAY    // Enable graphical overlay on Z-offset editor
770 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
771 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
772 
+  #define BABYSTEP_MULTIPLICATOR 25         // Babysteps are very small. Increase for faster motion.
773 
+
774 
+  #define DOUBLECLICK_FOR_Z_BABYSTEPPING    // Double-click on the Status Screen for Z Babystepping.
775 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
776 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
777 
+                                            // Note: Extra time may be added to mitigate controller latency.
778 
+  #endif
779 
+
780 
+  #define BABYSTEP_ZPROBE_OFFSET            // Combine M851 Z and Babystepping
778 781 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
779 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
782 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
783 
+    #define BABYSTEP_ZPROBE_GFX_OVERLAY     // Enable graphical overlay on Z-offset editor
780 784 
   #endif
781 785 
 #endif
782 786

+ 13
- 9
Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h Wyświetl plik 

@@ -771,16 +771,20 @@
771 771 
  */
772 772 
 #define BABYSTEPPING
773 773 
 #if ENABLED(BABYSTEPPING)
774 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
775 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
776 
-  #define BABYSTEP_MULTIPLICATOR 40  // Babysteps are very small. Increase for faster motion.
777 
-//#define BABYSTEP_ZPROBE_OFFSET     // Combine M851 Z and Babystepping
778 
-  #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
779 
-  #define DOUBLECLICK_MAX_INTERVAL 1250  // Maximum interval between clicks, in milliseconds.
780 
-                                         // Note: Extra time may be added to mitigate controller latency.
781 
-//#define BABYSTEP_ZPROBE_GFX_OVERLAY    // Enable graphical overlay on Z-offset editor
774 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
775 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
776 
+  #define BABYSTEP_MULTIPLICATOR 40         // Babysteps are very small. Increase for faster motion.
777 
+
778 
+  #define DOUBLECLICK_FOR_Z_BABYSTEPPING    // Double-click on the Status Screen for Z Babystepping.
779 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
780 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
781 
+                                            // Note: Extra time may be added to mitigate controller latency.
782 
+  #endif
783 
+
784 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
782 785 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
783 
-    #define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
786 
+    #define BABYSTEP_HOTEND_Z_OFFSET        // For multiple hotends, babystep relative Z offsets
787 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
784 788 
   #endif
785 789 
 #endif
786 790

+ 13
- 9
Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h Wyświetl plik 

@@ -772,16 +772,20 @@
772 772 
  */
773 773 
 #define BABYSTEPPING
774 774 
 #if ENABLED(BABYSTEPPING)
775 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
776 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
777 
-  #define BABYSTEP_MULTIPLICATOR 40  // Babysteps are very small. Increase for faster motion.
778 
-//#define BABYSTEP_ZPROBE_OFFSET     // Combine M851 Z and Babystepping
779 
-  #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
780 
-  #define DOUBLECLICK_MAX_INTERVAL 1250  // Maximum interval between clicks, in milliseconds.
781 
-                                         // Note: Extra time may be added to mitigate controller latency.
782 
-//#define BABYSTEP_ZPROBE_GFX_OVERLAY    // Enable graphical overlay on Z-offset editor
775 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
776 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
777 
+  #define BABYSTEP_MULTIPLICATOR 40         // Babysteps are very small. Increase for faster motion.
778 
+
779 
+  #define DOUBLECLICK_FOR_Z_BABYSTEPPING    // Double-click on the Status Screen for Z Babystepping.
780 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
781 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
782 
+                                            // Note: Extra time may be added to mitigate controller latency.
783 
+  #endif
784 
+
785 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
783 786 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
784 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
787 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
788 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
785 789 
   #endif
786 790 
 #endif
787 791

+ 13
- 9
Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h Wyświetl plik 

@@ -767,16 +767,20 @@
767 767 
  */
768 768 
 #define BABYSTEPPING
769 769 
 #if ENABLED(BABYSTEPPING)
770 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
771 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
772 
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
773 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
774 
-  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
775 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
776 
-                                        // Note: Extra time may be added to mitigate controller latency.
777 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
770 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
771 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
772 
+  #define BABYSTEP_MULTIPLICATOR  1         // Babysteps are very small. Increase for faster motion.
773 
+
774 
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
775 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
776 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
777 
+                                            // Note: Extra time may be added to mitigate controller latency.
778 
+  #endif
779 
+
780 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
778 781 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
779 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
782 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
783 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
780 784 
   #endif
781 785 
 #endif
782 786

+ 13
- 9
Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h Wyświetl plik 

@@ -767,16 +767,20 @@
767 767 
  */
768 768 
 #define BABYSTEPPING
769 769 
 #if ENABLED(BABYSTEPPING)
770 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
771 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
772 
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
773 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
774 
-  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
775 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
776 
-                                        // Note: Extra time may be added to mitigate controller latency.
777 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
770 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
771 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
772 
+  #define BABYSTEP_MULTIPLICATOR  1         // Babysteps are very small. Increase for faster motion.
773 
+
774 
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
775 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
776 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
777 
+                                            // Note: Extra time may be added to mitigate controller latency.
778 
+  #endif
779 
+
780 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
778 781 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
779 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
782 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
783 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
780 784 
   #endif
781 785 
 #endif
782 786

+ 13
- 9
Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h Wyświetl plik 

@@ -767,16 +767,20 @@
767 767 
  */
768 768 
 //#define BABYSTEPPING
769 769 
 #if ENABLED(BABYSTEPPING)
770 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
771 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
772 
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
773 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
774 
-  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
775 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
776 
-                                        // Note: Extra time may be added to mitigate controller latency.
777 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
770 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
771 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
772 
+  #define BABYSTEP_MULTIPLICATOR  1         // Babysteps are very small. Increase for faster motion.
773 
+
774 
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
775 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
776 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
777 
+                                            // Note: Extra time may be added to mitigate controller latency.
778 
+  #endif
779 
+
780 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
778 781 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
779 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
782 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
783 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
780 784 
   #endif
781 785 
 #endif
782 786

+ 13
- 9
Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h Wyświetl plik 

@@ -767,16 +767,20 @@
767 767 
  */
768 768 
 #define BABYSTEPPING
769 769 
 #if ENABLED(BABYSTEPPING)
770 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
771 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
772 
-  #define BABYSTEP_MULTIPLICATOR 5   // Babysteps are very small. Increase for faster motion.
773 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
774 
-  #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
775 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
776 
-                                        // Note: Extra time may be added to mitigate controller latency.
777 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
770 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
771 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
772 
+  #define BABYSTEP_MULTIPLICATOR  5         // Babysteps are very small. Increase for faster motion.
773 
+
774 
+  #define DOUBLECLICK_FOR_Z_BABYSTEPPING    // Double-click on the Status Screen for Z Babystepping.
775 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
776 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
777 
+                                            // Note: Extra time may be added to mitigate controller latency.
778 
+  #endif
779 
+
780 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
778 781 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
779 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
782 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
783 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
780 784 
   #endif
781 785 
 #endif
782 786

+ 13
- 9
Marlin/src/config/examples/MakerParts/Configuration_adv.h Wyświetl plik 

@@ -767,16 +767,20 @@
767 767 
  */
768 768 
 //#define BABYSTEPPING
769 769 
 #if ENABLED(BABYSTEPPING)
770 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
771 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
772 
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
773 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
774 
-  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
775 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
776 
-                                        // Note: Extra time may be added to mitigate controller latency.
777 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
770 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
771 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
772 
+  #define BABYSTEP_MULTIPLICATOR  1         // Babysteps are very small. Increase for faster motion.
773 
+
774 
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
775 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
776 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
777 
+                                            // Note: Extra time may be added to mitigate controller latency.
778 
+  #endif
779 
+
780 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
778 781 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
779 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
782 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
783 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
780 784 
   #endif
781 785 
 #endif
782 786

+ 13
- 9
Marlin/src/config/examples/Malyan/M150/Configuration_adv.h Wyświetl plik 

@@ -767,16 +767,20 @@
767 767 
  */
768 768 
 //#define BABYSTEPPING
769 769 
 #if ENABLED(BABYSTEPPING)
770 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
771 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
772 
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
773 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
774 
-  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
775 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
776 
-                                        // Note: Extra time may be added to mitigate controller latency.
777 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
770 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
771 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
772 
+  #define BABYSTEP_MULTIPLICATOR  1         // Babysteps are very small. Increase for faster motion.
773 
+
774 
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
775 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
776 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
777 
+                                            // Note: Extra time may be added to mitigate controller latency.
778 
+  #endif
779 
+
780 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
778 781 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
779 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
782 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
783 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
780 784 
   #endif
781 785 
 #endif
782 786

+ 13
- 9
Marlin/src/config/examples/Malyan/M200/Configuration_adv.h Wyświetl plik 

@@ -767,16 +767,20 @@
767 767 
  */
768 768 
 //#define BABYSTEPPING
769 769 
 #if ENABLED(BABYSTEPPING)
770 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
771 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
772 
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
773 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
774 
-  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
775 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
776 
-                                        // Note: Extra time may be added to mitigate controller latency.
777 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
770 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
771 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
772 
+  #define BABYSTEP_MULTIPLICATOR  1         // Babysteps are very small. Increase for faster motion.
773 
+
774 
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
775 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
776 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
777 
+                                            // Note: Extra time may be added to mitigate controller latency.
778 
+  #endif
779 
+
780 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
778 781 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
779 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
782 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
783 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
780 784 
   #endif
781 785 
 #endif
782 786

+ 13
- 9
Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h Wyświetl plik 

@@ -767,16 +767,20 @@
767 767 
  */
768 768 
 //#define BABYSTEPPING
769 769 
 #if ENABLED(BABYSTEPPING)
770 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
771 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
772 
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
773 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
774 
-  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
775 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
776 
-                                        // Note: Extra time may be added to mitigate controller latency.
777 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
770 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
771 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
772 
+  #define BABYSTEP_MULTIPLICATOR  1         // Babysteps are very small. Increase for faster motion.
773 
+
774 
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
775 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
776 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
777 
+                                            // Note: Extra time may be added to mitigate controller latency.
778 
+  #endif
779 
+
780 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
778 781 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
779 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
782 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
783 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
780 784 
   #endif
781 785 
 #endif
782 786

+ 13
- 9
Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h Wyświetl plik 

@@ -775,16 +775,20 @@
775 775 
  */
776 776 
 //#define BABYSTEPPING
777 777 
 #if ENABLED(BABYSTEPPING)
778 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
779 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
780 
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
781 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
782 
-  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
783 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
784 
-                                        // Note: Extra time may be added to mitigate controller latency.
785 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
778 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
779 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
780 
+  #define BABYSTEP_MULTIPLICATOR  1         // Babysteps are very small. Increase for faster motion.
781 
+
782 
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
783 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
784 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
785 
+                                            // Note: Extra time may be added to mitigate controller latency.
786 
+  #endif
787 
+
788 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
786 789 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
787 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
790 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
791 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
788 792 
   #endif
789 793 
 #endif
790 794

+ 13
- 9
Marlin/src/config/examples/RigidBot/Configuration_adv.h Wyświetl plik 

@@ -767,16 +767,20 @@
767 767 
  */
768 768 
 //#define BABYSTEPPING
769 769 
 #if ENABLED(BABYSTEPPING)
770 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
771 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
772 
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
773 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
774 
-  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
775 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
776 
-                                        // Note: Extra time may be added to mitigate controller latency.
777 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
770 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
771 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
772 
+  #define BABYSTEP_MULTIPLICATOR  1         // Babysteps are very small. Increase for faster motion.
773 
+
774 
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
775 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
776 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
777 
+                                            // Note: Extra time may be added to mitigate controller latency.
778 
+  #endif
779 
+
780 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
778 781 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
779 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
782 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
783 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
780 784 
   #endif
781 785 
 #endif
782 786

+ 13
- 9
Marlin/src/config/examples/SCARA/Configuration_adv.h Wyświetl plik 

@@ -767,16 +767,20 @@
767 767 
  */
768 768 
 //#define BABYSTEPPING
769 769 
 #if ENABLED(BABYSTEPPING)
770 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
771 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
772 
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
773 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
774 
-  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
775 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
776 
-                                        // Note: Extra time may be added to mitigate controller latency.
777 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
770 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
771 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
772 
+  #define BABYSTEP_MULTIPLICATOR  1         // Babysteps are very small. Increase for faster motion.
773 
+
774 
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
775 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
776 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
777 
+                                            // Note: Extra time may be added to mitigate controller latency.
778 
+  #endif
779 
+
780 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
778 781 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
779 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
782 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
783 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
780 784 
   #endif
781 785 
 #endif
782 786

+ 13
- 9
Marlin/src/config/examples/Sanguinololu/Configuration_adv.h Wyświetl plik 

@@ -767,16 +767,20 @@
767 767 
  */
768 768 
 //#define BABYSTEPPING
769 769 
 #if ENABLED(BABYSTEPPING)
770 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
771 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
772 
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
773 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
774 
-  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
775 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
776 
-                                        // Note: Extra time may be added to mitigate controller latency.
777 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
770 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
771 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
772 
+  #define BABYSTEP_MULTIPLICATOR  1         // Babysteps are very small. Increase for faster motion.
773 
+
774 
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
775 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
776 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
777 
+                                            // Note: Extra time may be added to mitigate controller latency.
778 
+  #endif
779 
+
780 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
778 781 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
779 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
782 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
783 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
780 784 
   #endif
781 785 
 #endif
782 786

+ 13
- 9
Marlin/src/config/examples/TheBorg/Configuration_adv.h Wyświetl plik 

@@ -767,16 +767,20 @@
767 767 
  */
768 768 
 //#define BABYSTEPPING
769 769 
 #if ENABLED(BABYSTEPPING)
770 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
771 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
772 
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
773 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
774 
-  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
775 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
776 
-                                        // Note: Extra time may be added to mitigate controller latency.
777 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
770 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
771 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
772 
+  #define BABYSTEP_MULTIPLICATOR  1         // Babysteps are very small. Increase for faster motion.
773 
+
774 
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
775 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
776 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
777 
+                                            // Note: Extra time may be added to mitigate controller latency.
778 
+  #endif
779 
+
780 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
778 781 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
779 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
782 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
783 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
780 784 
   #endif
781 785 
 #endif
782 786

+ 13
- 9
Marlin/src/config/examples/TinyBoy2/Configuration_adv.h Wyświetl plik 

@@ -767,16 +767,20 @@
767 767 
  */
768 768 
 //#define BABYSTEPPING
769 769 
 #if ENABLED(BABYSTEPPING)
770 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
771 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
772 
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
773 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
774 
-  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
775 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
776 
-                                        // Note: Extra time may be added to mitigate controller latency.
777 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
770 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
771 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
772 
+  #define BABYSTEP_MULTIPLICATOR  1         // Babysteps are very small. Increase for faster motion.
773 
+
774 
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
775 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
776 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
777 
+                                            // Note: Extra time may be added to mitigate controller latency.
778 
+  #endif
779 
+
780 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
778 781 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
779 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
782 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
783 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
780 784 
   #endif
781 785 
 #endif
782 786

+ 13
- 9
Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h Wyświetl plik 

@@ -767,16 +767,20 @@
767 767 
  */
768 768 
 //#define BABYSTEPPING
769 769 
 #if ENABLED(BABYSTEPPING)
770 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
771 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
772 
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
773 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
774 
-  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
775 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
776 
-                                        // Note: Extra time may be added to mitigate controller latency.
777 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
770 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
771 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
772 
+  #define BABYSTEP_MULTIPLICATOR  1         // Babysteps are very small. Increase for faster motion.
773 
+
774 
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
775 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
776 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
777 
+                                            // Note: Extra time may be added to mitigate controller latency.
778 
+  #endif
779 
+
780 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
778 781 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
779 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
782 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
783 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
780 784 
   #endif
781 785 
 #endif
782 786

+ 13
- 9
Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h Wyświetl plik 

@@ -767,16 +767,20 @@
767 767 
  */
768 768 
 //#define BABYSTEPPING
769 769 
 #if ENABLED(BABYSTEPPING)
770 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
771 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
772 
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
773 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
774 
-  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
775 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
776 
-                                        // Note: Extra time may be added to mitigate controller latency.
777 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
770 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
771 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
772 
+  #define BABYSTEP_MULTIPLICATOR  1         // Babysteps are very small. Increase for faster motion.
773 
+
774 
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
775 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
776 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
777 
+                                            // Note: Extra time may be added to mitigate controller latency.
778 
+  #endif
779 
+
780 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
778 781 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
779 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
782 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
783 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
780 784 
   #endif
781 785 
 #endif
782 786

+ 13
- 9
Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h Wyświetl plik 

@@ -780,16 +780,20 @@
780 780 
  */
781 781 
 #define BABYSTEPPING
782 782 
 #if ENABLED(BABYSTEPPING)
783 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
784 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
785 
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
786 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
787 
-  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
788 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
789 
-                                        // Note: Extra time may be added to mitigate controller latency.
790 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
783 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
784 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
785 
+  #define BABYSTEP_MULTIPLICATOR  1         // Babysteps are very small. Increase for faster motion.
786 
+
787 
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
788 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
789 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
790 
+                                            // Note: Extra time may be added to mitigate controller latency.
791 
+  #endif
792 
+
793 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
791 794 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
792 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
795 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
796 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
793 797 
   #endif
794 798 
 #endif
795 799

+ 13
- 9
Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h Wyświetl plik 

@@ -767,16 +767,20 @@
767 767 
  */
768 768 
 //#define BABYSTEPPING
769 769 
 #if ENABLED(BABYSTEPPING)
770 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
771 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
772 
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
773 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
774 
-  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
775 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
776 
-                                        // Note: Extra time may be added to mitigate controller latency.
777 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
770 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
771 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
772 
+  #define BABYSTEP_MULTIPLICATOR  1         // Babysteps are very small. Increase for faster motion.
773 
+
774 
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
775 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
776 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
777 
+                                            // Note: Extra time may be added to mitigate controller latency.
778 
+  #endif
779 
+
780 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
778 781 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
779 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
782 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
783 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
780 784 
   #endif
781 785 
 #endif
782 786

+ 13
- 9
Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h Wyświetl plik 

@@ -769,16 +769,20 @@
769 769 
  */
770 770 
 #define BABYSTEPPING
771 771 
 #if ENABLED(BABYSTEPPING)
772 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
773 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
774 
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
775 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
776 
-  #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
777 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
778 
-                                        // Note: Extra time may be added to mitigate controller latency.
779 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
772 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
773 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
774 
+  #define BABYSTEP_MULTIPLICATOR  1         // Babysteps are very small. Increase for faster motion.
775 
+
776 
+  #define DOUBLECLICK_FOR_Z_BABYSTEPPING    // Double-click on the Status Screen for Z Babystepping.
777 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
778 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
779 
+                                            // Note: Extra time may be added to mitigate controller latency.
780 
+  #endif
781 
+
782 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
780 783 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
781 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
784 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
785 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
782 786 
   #endif
783 787 
 #endif
784 788

+ 13
- 9
Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h Wyświetl plik 

@@ -769,16 +769,20 @@
769 769 
  */
770 770 
 #define BABYSTEPPING
771 771 
 #if ENABLED(BABYSTEPPING)
772 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
773 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
774 
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
775 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
776 
-  #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
777 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
778 
-                                        // Note: Extra time may be added to mitigate controller latency.
779 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
772 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
773 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
774 
+  #define BABYSTEP_MULTIPLICATOR  1         // Babysteps are very small. Increase for faster motion.
775 
+
776 
+  #define DOUBLECLICK_FOR_Z_BABYSTEPPING    // Double-click on the Status Screen for Z Babystepping.
777 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
778 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
779 
+                                            // Note: Extra time may be added to mitigate controller latency.
780 
+  #endif
781 
+
782 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
780 783 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
781 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
784 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
785 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
782 786 
   #endif
783 787 
 #endif
784 788

+ 13
- 9
Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h Wyświetl plik 

@@ -769,16 +769,20 @@
769 769 
  */
770 770 
 //#define BABYSTEPPING
771 771 
 #if ENABLED(BABYSTEPPING)
772 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
773 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
774 
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
775 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
776 
-  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
777 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
778 
-                                        // Note: Extra time may be added to mitigate controller latency.
779 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
772 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
773 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
774 
+  #define BABYSTEP_MULTIPLICATOR  1         // Babysteps are very small. Increase for faster motion.
775 
+
776 
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
777 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
778 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
779 
+                                            // Note: Extra time may be added to mitigate controller latency.
780 
+  #endif
781 
+
782 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
780 783 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
781 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
784 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
785 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
782 786 
   #endif
783 787 
 #endif
784 788

+ 13
- 9
Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h Wyświetl plik 

@@ -769,16 +769,20 @@
769 769 
  */
770 770 
 //#define BABYSTEPPING
771 771 
 #if ENABLED(BABYSTEPPING)
772 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
773 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
774 
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
775 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
776 
-  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
777 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
778 
-                                        // Note: Extra time may be added to mitigate controller latency.
779 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
772 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
773 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
774 
+  #define BABYSTEP_MULTIPLICATOR  1         // Babysteps are very small. Increase for faster motion.
775 
+
776 
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
777 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
778 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
779 
+                                            // Note: Extra time may be added to mitigate controller latency.
780 
+  #endif
781 
+
782 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
780 783 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
781 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
784 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
785 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
782 786 
   #endif
783 787 
 #endif
784 788

+ 13
- 9
Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h Wyświetl plik 

@@ -769,16 +769,20 @@
769 769 
  */
770 770 
 //#define BABYSTEPPING
771 771 
 #if ENABLED(BABYSTEPPING)
772 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
773 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
774 
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
775 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
776 
-  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
777 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
778 
-                                        // Note: Extra time may be added to mitigate controller latency.
779 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
772 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
773 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
774 
+  #define BABYSTEP_MULTIPLICATOR  1         // Babysteps are very small. Increase for faster motion.
775 
+
776 
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
777 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
778 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
779 
+                                            // Note: Extra time may be added to mitigate controller latency.
780 
+  #endif
781 
+
782 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
780 783 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
781 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
784 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
785 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
782 786 
   #endif
783 787 
 #endif
784 788

+ 13
- 9
Marlin/src/config/examples/delta/generic/Configuration_adv.h Wyświetl plik 

@@ -769,16 +769,20 @@
769 769 
  */
770 770 
 //#define BABYSTEPPING
771 771 
 #if ENABLED(BABYSTEPPING)
772 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
773 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
774 
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
775 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
776 
-  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
777 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
778 
-                                        // Note: Extra time may be added to mitigate controller latency.
779 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
772 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
773 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
774 
+  #define BABYSTEP_MULTIPLICATOR  1         // Babysteps are very small. Increase for faster motion.
775 
+
776 
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
777 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
778 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
779 
+                                            // Note: Extra time may be added to mitigate controller latency.
780 
+  #endif
781 
+
782 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
780 783 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
781 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
784 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
785 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
782 786 
   #endif
783 787 
 #endif
784 788

+ 13
- 9
Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h Wyświetl plik 

@@ -769,16 +769,20 @@
769 769 
  */
770 770 
 //#define BABYSTEPPING
771 771 
 #if ENABLED(BABYSTEPPING)
772 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
773 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
774 
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
775 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
776 
-  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
777 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
778 
-                                        // Note: Extra time may be added to mitigate controller latency.
779 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
772 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
773 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
774 
+  #define BABYSTEP_MULTIPLICATOR  1         // Babysteps are very small. Increase for faster motion.
775 
+
776 
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
777 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
778 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
779 
+                                            // Note: Extra time may be added to mitigate controller latency.
780 
+  #endif
781 
+
782 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
780 783 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
781 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
784 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
785 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
782 786 
   #endif
783 787 
 #endif
784 788

+ 13
- 9
Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h Wyświetl plik 

@@ -769,16 +769,20 @@
769 769 
  */
770 770 
 //#define BABYSTEPPING
771 771 
 #if ENABLED(BABYSTEPPING)
772 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
773 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
774 
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
775 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
776 
-  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
777 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
778 
-                                        // Note: Extra time may be added to mitigate controller latency.
779 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
772 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
773 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
774 
+  #define BABYSTEP_MULTIPLICATOR  1         // Babysteps are very small. Increase for faster motion.
775 
+
776 
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
777 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
778 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
779 
+                                            // Note: Extra time may be added to mitigate controller latency.
780 
+  #endif
781 
+
782 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
780 783 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
781 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
784 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
785 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
782 786 
   #endif
783 787 
 #endif
784 788

+ 13
- 9
Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h Wyświetl plik 

@@ -767,16 +767,20 @@
767 767 
  */
768 768 
 #define BABYSTEPPING
769 769 
 #if ENABLED(BABYSTEPPING)
770 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
771 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
772 
-  #define BABYSTEP_MULTIPLICATOR   3 // Babysteps are very small. Increase for faster motion.
773 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
774 
-  #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
775 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
776 
-                                        // Note: Extra time may be added to mitigate controller latency.
777 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
770 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
771 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
772 
+  #define BABYSTEP_MULTIPLICATOR  3         // Babysteps are very small. Increase for faster motion.
773 
+
774 
+  #define DOUBLECLICK_FOR_Z_BABYSTEPPING    // Double-click on the Status Screen for Z Babystepping.
775 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
776 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
777 
+                                            // Note: Extra time may be added to mitigate controller latency.
778 
+  #endif
779 
+
780 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
778 781 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
779 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
782 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
783 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
780 784 
   #endif
781 785 
 #endif
782 786

+ 13
- 9
Marlin/src/config/examples/makibox/Configuration_adv.h Wyświetl plik 

@@ -767,16 +767,20 @@
767 767 
  */
768 768 
 //#define BABYSTEPPING
769 769 
 #if ENABLED(BABYSTEPPING)
770 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
771 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
772 
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
773 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
774 
-  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
775 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
776 
-                                        // Note: Extra time may be added to mitigate controller latency.
777 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
770 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
771 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
772 
+  #define BABYSTEP_MULTIPLICATOR  1         // Babysteps are very small. Increase for faster motion.
773 
+
774 
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
775 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
776 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
777 
+                                            // Note: Extra time may be added to mitigate controller latency.
778 
+  #endif
779 
+
780 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
778 781 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
779 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
782 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
783 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
780 784 
   #endif
781 785 
 #endif
782 786

+ 13
- 9
Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h Wyświetl plik 

@@ -767,16 +767,20 @@
767 767 
  */
768 768 
 //#define BABYSTEPPING
769 769 
 #if ENABLED(BABYSTEPPING)
770 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
771 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
772 
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
773 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
774 
-  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
775 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
776 
-                                        // Note: Extra time may be added to mitigate controller latency.
777 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
770 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
771 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
772 
+  #define BABYSTEP_MULTIPLICATOR  1         // Babysteps are very small. Increase for faster motion.
773 
+
774 
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
775 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
776 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
777 
+                                            // Note: Extra time may be added to mitigate controller latency.
778 
+  #endif
779 
+
780 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
778 781 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
779 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
782 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
783 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
780 784 
   #endif
781 785 
 #endif
782 786

+ 13
- 9
Marlin/src/config/examples/wt150/Configuration_adv.h Wyświetl plik 

@@ -768,16 +768,20 @@
768 768 
  */
769 769 
 //#define BABYSTEPPING
770 770 
 #if ENABLED(BABYSTEPPING)
771 
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
772 
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
773 
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
774 
-  //#define BABYSTEP_ZPROBE_OFFSET   // Combine M851 Z and Babystepping
775 
-  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
776 
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
777 
-                                        // Note: Extra time may be added to mitigate controller latency.
778 
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
771 
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
772 
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
773 
+  #define BABYSTEP_MULTIPLICATOR  1         // Babysteps are very small. Increase for faster motion.
774 
+
775 
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
776 
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
777 
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
778 
+                                            // Note: Extra time may be added to mitigate controller latency.
779 
+  #endif
780 
+
781 
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
779 782 
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
780 
-    //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
783 
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
784 
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
781 785 
   #endif
782 786 
 #endif
783 787

Napisz Podgląd
Ładowanie…
Anuluj
Zapisz