thomas
/
marlin
Vērot 1
Pievienot zvaigznīti 0
Atdalīts 0
Kods Problēmas 0 Izmaiņu pieprasījumi 0 Laidieni 0 Vikivietne Aktivitāte
Pārlūkot izejas kodu

Merge pull request #3013 from thinkyhead/esenapaj-patch-1 

Enhanced #3010 - formal Mesh/Manual dependency
Scott Lahteine 9 gadus atpakaļ
vecāks
6e64895c30 c2e5c6c12c
revīzija
e7cf85b922
18 mainītis faili ar 139 papildinājumiem un 102 dzēšanām
Dalītais skats Rādīt salīdzināšanas statistiku
  1. 8
    6
      Marlin/Configuration.h
  2. 3
    0
      Marlin/SanityCheck.h
  3. 8
    6
      Marlin/example_configurations/Felix/Configuration.h
  4. 8
    6
      Marlin/example_configurations/Felix/Configuration_DUAL.h
  5. 8
    6
      Marlin/example_configurations/Hephestos/Configuration.h
  6. 8
    6
      Marlin/example_configurations/K8200/Configuration.h
  7. 8
    6
      Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
  8. 8
    6
      Marlin/example_configurations/RigidBot/Configuration.h
  9. 8
    6
      Marlin/example_configurations/SCARA/Configuration.h
  10. 8
    6
      Marlin/example_configurations/TAZ4/Configuration.h
  11. 8
    6
      Marlin/example_configurations/WITBOX/Configuration.h
  12. 8
    6
      Marlin/example_configurations/adafruit/ST7565/Configuration.h
  13. 8
    6
      Marlin/example_configurations/delta/biv2.5/Configuration.h
  14. 8
    6
      Marlin/example_configurations/delta/generic/Configuration.h
  15. 8
    6
      Marlin/example_configurations/delta/kossel_mini/Configuration.h
  16. 8
    6
      Marlin/example_configurations/delta/kossel_pro/Configuration.h
  17. 8
    6
      Marlin/example_configurations/makibox/Configuration.h
  18. 8
    6
      Marlin/example_configurations/tvrrug/Round2/Configuration.h

+ 8
- 6
Marlin/Configuration.h Parādīt failu 

@@ -413,16 +413,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
413 413 
 #endif
414 414
415 415 
 //===========================================================================
416 
-//=========================== Manual Bed Leveling ===========================
416 
+//============================ Mesh Bed Leveling ============================
417 417 
 //===========================================================================
418 418
419 
-//#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
420 419 
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
421 420
422 
-#if ENABLED(MANUAL_BED_LEVELING)
423 
-  #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
424 
-#endif  // MANUAL_BED_LEVELING
425 
-
426 421 
 #if ENABLED(MESH_BED_LEVELING)
427 422 
   #define MESH_MIN_X 10
428 423 
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
 
@@ -431,6 +426,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
431 426 
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
432 427 
   #define MESH_NUM_Y_POINTS 3
433 428 
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
429 
+
430 
+  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
431 
+
432 
+  #if ENABLED(MANUAL_BED_LEVELING)
433 
+    #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
434 
+  #endif  // MANUAL_BED_LEVELING
435 
+
434 436 
 #endif  // MESH_BED_LEVELING
435 437
436 438 
 //===========================================================================

+ 3
- 0
Marlin/SanityCheck.h Parādīt failu 

@@ -112,6 +112,7 @@
112 112 
 /**
113 113 
  * Mesh Bed Leveling
114 114 
  */
115 
+
115 116 
 #if ENABLED(MESH_BED_LEVELING)
116 117 
   #if ENABLED(DELTA)
117 118 
     #error MESH_BED_LEVELING does not yet support DELTA printers.
 
@@ -122,6 +123,8 @@
122 123 
   #if MESH_NUM_X_POINTS > 7 || MESH_NUM_Y_POINTS > 7
123 124 
     #error MESH_NUM_X_POINTS and MESH_NUM_Y_POINTS need to be less than 8.
124 125 
   #endif
126 
+#elif ENABLED(MANUAL_BED_LEVELING)
127 
+  #error MESH_BED_LEVELING is required for MANUAL_BED_LEVELING.
125 128 
 #endif
126 129
127 130 
 /**

+ 8
- 6
Marlin/example_configurations/Felix/Configuration.h Parādīt failu 

@@ -395,16 +395,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
395 395 
 #endif
396 396
397 397 
 //===========================================================================
398 
-//=========================== Manual Bed Leveling ===========================
398 
+//============================ Mesh Bed Leveling ============================
399 399 
 //===========================================================================
400 400
401 
-//#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
402 401 
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
403 402
404 
-#if ENABLED(MANUAL_BED_LEVELING)
405 
-  #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
406 
-#endif  // MANUAL_BED_LEVELING
407 
-
408 403 
 #if ENABLED(MESH_BED_LEVELING)
409 404 
   #define MESH_MIN_X 10
410 405 
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
 
@@ -413,6 +408,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
413 408 
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
414 409 
   #define MESH_NUM_Y_POINTS 3
415 410 
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
411 
+
412 
+  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
413 
+
414 
+  #if ENABLED(MANUAL_BED_LEVELING)
415 
+    #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
416 
+  #endif  // MANUAL_BED_LEVELING
417 
+
416 418 
 #endif  // MESH_BED_LEVELING
417 419
418 420 
 //===========================================================================

+ 8
- 6
Marlin/example_configurations/Felix/Configuration_DUAL.h Parādīt failu 

@@ -365,16 +365,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
365 365 
 #endif
366 366
367 367 
 //===========================================================================
368 
-//=========================== Manual Bed Leveling ===========================
368 
+//============================ Mesh Bed Leveling ============================
369 369 
 //===========================================================================
370 370
371 
-//#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
372 371 
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
373 372
374 
-#if ENABLED(MANUAL_BED_LEVELING)
375 
-  #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
376 
-#endif  // MANUAL_BED_LEVELING
377 
-
378 373 
 #if ENABLED(MESH_BED_LEVELING)
379 374 
   #define MESH_MIN_X 10
380 375 
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
 
@@ -383,6 +378,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
383 378 
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
384 379 
   #define MESH_NUM_Y_POINTS 3
385 380 
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
381 
+
382 
+  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
383 
+
384 
+  #if ENABLED(MANUAL_BED_LEVELING)
385 
+    #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
386 
+  #endif  // MANUAL_BED_LEVELING
387 
+
386 388 
 #endif  // MESH_BED_LEVELING
387 389
388 390 
 //===========================================================================

+ 8
- 6
Marlin/example_configurations/Hephestos/Configuration.h Parādīt failu 

@@ -405,16 +405,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
405 405 
 #endif
406 406
407 407 
 //===========================================================================
408 
-//=========================== Manual Bed Leveling ===========================
408 
+//============================ Mesh Bed Leveling ============================
409 409 
 //===========================================================================
410 410
411 
-//#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
412 411 
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
413 412
414 
-#if ENABLED(MANUAL_BED_LEVELING)
415 
-  #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
416 
-#endif  // MANUAL_BED_LEVELING
417 
-
418 413 
 #if ENABLED(MESH_BED_LEVELING)
419 414 
   #define MESH_MIN_X 10
420 415 
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
 
@@ -423,6 +418,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
423 418 
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
424 419 
   #define MESH_NUM_Y_POINTS 3
425 420 
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
421 
+
422 
+  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
423 
+
424 
+  #if ENABLED(MANUAL_BED_LEVELING)
425 
+    #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
426 
+  #endif  // MANUAL_BED_LEVELING
427 
+
426 428 
 #endif  // MESH_BED_LEVELING
427 429
428 430 
 //===========================================================================

+ 8
- 6
Marlin/example_configurations/K8200/Configuration.h Parādīt failu 

@@ -428,16 +428,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
428 428 
 #endif
429 429
430 430 
 //===========================================================================
431 
-//=========================== Manual Bed Leveling ===========================
431 
+//============================ Mesh Bed Leveling ============================
432 432 
 //===========================================================================
433 433
434 
-//#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
435 434 
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
436 435
437 
-#if ENABLED(MANUAL_BED_LEVELING)
438 
-  #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
439 
-#endif  // MANUAL_BED_LEVELING
440 
-
441 436 
 #if ENABLED(MESH_BED_LEVELING)
442 437 
   #define MESH_MIN_X 10
443 438 
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
 
@@ -446,6 +441,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
446 441 
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
447 442 
   #define MESH_NUM_Y_POINTS 3
448 443 
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
444 
+
445 
+  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
446 
+
447 
+  #if ENABLED(MANUAL_BED_LEVELING)
448 
+    #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
449 
+  #endif  // MANUAL_BED_LEVELING
450 
+
449 451 
 #endif  // MESH_BED_LEVELING
450 452
451 453 
 //===========================================================================

+ 8
- 6
Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h Parādīt failu 

@@ -413,16 +413,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
413 413 
 #endif
414 414
415 415 
 //===========================================================================
416 
-//=========================== Manual Bed Leveling ===========================
416 
+//============================ Mesh Bed Leveling ============================
417 417 
 //===========================================================================
418 418
419 
-//#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
420 419 
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
421 420
422 
-#if ENABLED(MANUAL_BED_LEVELING)
423 
-  #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
424 
-#endif  // MANUAL_BED_LEVELING
425 
-
426 421 
 #if ENABLED(MESH_BED_LEVELING)
427 422 
   #define MESH_MIN_X 10
428 423 
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
 
@@ -431,6 +426,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
431 426 
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
432 427 
   #define MESH_NUM_Y_POINTS 3
433 428 
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
429 
+
430 
+  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
431 
+
432 
+  #if ENABLED(MANUAL_BED_LEVELING)
433 
+    #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
434 
+  #endif  // MANUAL_BED_LEVELING
435 
+
434 436 
 #endif  // MESH_BED_LEVELING
435 437
436 438 
 //===========================================================================

+ 8
- 6
Marlin/example_configurations/RigidBot/Configuration.h Parādīt failu 

@@ -404,16 +404,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
404 404 
 #endif
405 405
406 406 
 //===========================================================================
407 
-//=========================== Manual Bed Leveling ===========================
407 
+//============================ Mesh Bed Leveling ============================
408 408 
 //===========================================================================
409 409
410 
-//#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
411 410 
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
412 411
413 
-#if ENABLED(MANUAL_BED_LEVELING)
414 
-  #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
415 
-#endif  // MANUAL_BED_LEVELING
416 
-
417 412 
 #if ENABLED(MESH_BED_LEVELING)
418 413 
   #define MESH_MIN_X 10
419 414 
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
 
@@ -422,6 +417,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
422 417 
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
423 418 
   #define MESH_NUM_Y_POINTS 3
424 419 
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
420 
+
421 
+  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
422 
+
423 
+  #if ENABLED(MANUAL_BED_LEVELING)
424 
+    #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
425 
+  #endif  // MANUAL_BED_LEVELING
426 
+
425 427 
 #endif  // MESH_BED_LEVELING
426 428
427 429 
 //===========================================================================

+ 8
- 6
Marlin/example_configurations/SCARA/Configuration.h Parādīt failu 

@@ -421,16 +421,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
421 421 
 #endif
422 422
423 423 
 //===========================================================================
424 
-//=========================== Manual Bed Leveling ===========================
424 
+//============================ Mesh Bed Leveling ============================
425 425 
 //===========================================================================
426 426
427 
-//#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
428 427 
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
429 428
430 
-#if ENABLED(MANUAL_BED_LEVELING)
431 
-  #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
432 
-#endif  // MANUAL_BED_LEVELING
433 
-
434 429 
 #if ENABLED(MESH_BED_LEVELING)
435 430 
   #define MESH_MIN_X 10
436 431 
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
 
@@ -439,6 +434,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
439 434 
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
440 435 
   #define MESH_NUM_Y_POINTS 3
441 436 
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
437 
+
438 
+  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
439 
+
440 
+  #if ENABLED(MANUAL_BED_LEVELING)
441 
+    #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
442 
+  #endif  // MANUAL_BED_LEVELING
443 
+
442 444 
 #endif  // MESH_BED_LEVELING
443 445
444 446 
 //===========================================================================

+ 8
- 6
Marlin/example_configurations/TAZ4/Configuration.h Parādīt failu 

@@ -433,16 +433,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
433 433 
 #endif
434 434
435 435 
 //===========================================================================
436 
-//=========================== Manual Bed Leveling ===========================
436 
+//============================ Mesh Bed Leveling ============================
437 437 
 //===========================================================================
438 438
439 
-//#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
440 439 
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
441 440
442 
-#if ENABLED(MANUAL_BED_LEVELING)
443 
-  #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
444 
-#endif  // MANUAL_BED_LEVELING
445 
-
446 441 
 #if ENABLED(MESH_BED_LEVELING)
447 442 
   #define MESH_MIN_X 10
448 443 
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
 
@@ -451,6 +446,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
451 446 
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
452 447 
   #define MESH_NUM_Y_POINTS 3
453 448 
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
449 
+
450 
+  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
451 
+
452 
+  #if ENABLED(MANUAL_BED_LEVELING)
453 
+    #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
454 
+  #endif  // MANUAL_BED_LEVELING
455 
+
454 456 
 #endif  // MESH_BED_LEVELING
455 457
456 458 
 //===========================================================================

+ 8
- 6
Marlin/example_configurations/WITBOX/Configuration.h Parādīt failu 

@@ -405,16 +405,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
405 405 
 #endif
406 406
407 407 
 //===========================================================================
408 
-//=========================== Manual Bed Leveling ===========================
408 
+//============================ Mesh Bed Leveling ============================
409 409 
 //===========================================================================
410 410
411 
-//#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
412 411 
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
413 412
414 
-#if ENABLED(MANUAL_BED_LEVELING)
415 
-  #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
416 
-#endif  // MANUAL_BED_LEVELING
417 
-
418 413 
 #if ENABLED(MESH_BED_LEVELING)
419 414 
   #define MESH_MIN_X 10
420 415 
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
 
@@ -423,6 +418,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
423 418 
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
424 419 
   #define MESH_NUM_Y_POINTS 3
425 420 
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
421 
+
422 
+  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
423 
+
424 
+  #if ENABLED(MANUAL_BED_LEVELING)
425 
+    #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
426 
+  #endif  // MANUAL_BED_LEVELING
427 
+
426 428 
 #endif  // MESH_BED_LEVELING
427 429
428 430 
 //===========================================================================

+ 8
- 6
Marlin/example_configurations/adafruit/ST7565/Configuration.h Parādīt failu 

@@ -413,16 +413,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
413 413 
 #endif
414 414
415 415 
 //===========================================================================
416 
-//=========================== Manual Bed Leveling ===========================
416 
+//============================ Mesh Bed Leveling ============================
417 417 
 //===========================================================================
418 418
419 
-//#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
420 419 
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
421 420
422 
-#if ENABLED(MANUAL_BED_LEVELING)
423 
-  #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
424 
-#endif  // MANUAL_BED_LEVELING
425 
-
426 421 
 #if ENABLED(MESH_BED_LEVELING)
427 422 
   #define MESH_MIN_X 10
428 423 
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
 
@@ -431,6 +426,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
431 426 
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
432 427 
   #define MESH_NUM_Y_POINTS 3
433 428 
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
429 
+
430 
+  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
431 
+
432 
+  #if ENABLED(MANUAL_BED_LEVELING)
433 
+    #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
434 
+  #endif  // MANUAL_BED_LEVELING
435 
+
434 436 
 #endif  // MESH_BED_LEVELING
435 437
436 438 
 //===========================================================================

+ 8
- 6
Marlin/example_configurations/delta/biv2.5/Configuration.h Parādīt failu 

@@ -448,16 +448,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
448 448 
 #endif
449 449
450 450 
 //===========================================================================
451 
-//=========================== Manual Bed Leveling ===========================
451 
+//============================ Mesh Bed Leveling ============================
452 452 
 //===========================================================================
453 453
454 
-//#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
455 454 
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
456 455
457 
-#if ENABLED(MANUAL_BED_LEVELING)
458 
-  #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
459 
-#endif  // MANUAL_BED_LEVELING
460 
-
461 456 
 #if ENABLED(MESH_BED_LEVELING)
462 457 
   #define MESH_MIN_X 10
463 458 
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
 
@@ -466,6 +461,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
466 461 
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
467 462 
   #define MESH_NUM_Y_POINTS 3
468 463 
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
464 
+
465 
+  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
466 
+
467 
+  #if ENABLED(MANUAL_BED_LEVELING)
468 
+    #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
469 
+  #endif  // MANUAL_BED_LEVELING
470 
+
469 471 
 #endif  // MESH_BED_LEVELING
470 472
471 473 
 //===========================================================================

+ 8
- 6
Marlin/example_configurations/delta/generic/Configuration.h Parādīt failu 

@@ -448,16 +448,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
448 448 
 #endif
449 449
450 450 
 //===========================================================================
451 
-//=========================== Manual Bed Leveling ===========================
451 
+//============================ Mesh Bed Leveling ============================
452 452 
 //===========================================================================
453 453
454 
-//#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
455 454 
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
456 455
457 
-#if ENABLED(MANUAL_BED_LEVELING)
458 
-  #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
459 
-#endif  // MANUAL_BED_LEVELING
460 
-
461 456 
 #if ENABLED(MESH_BED_LEVELING)
462 457 
   #define MESH_MIN_X 10
463 458 
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
 
@@ -466,6 +461,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
466 461 
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
467 462 
   #define MESH_NUM_Y_POINTS 3
468 463 
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
464 
+
465 
+  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
466 
+
467 
+  #if ENABLED(MANUAL_BED_LEVELING)
468 
+    #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
469 
+  #endif  // MANUAL_BED_LEVELING
470 
+
469 471 
 #endif  // MESH_BED_LEVELING
470 472
471 473 
 //===========================================================================

+ 8
- 6
Marlin/example_configurations/delta/kossel_mini/Configuration.h Parādīt failu 

@@ -448,16 +448,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
448 448 
 #endif
449 449
450 450 
 //===========================================================================
451 
-//=========================== Manual Bed Leveling ===========================
451 
+//============================ Mesh Bed Leveling ============================
452 452 
 //===========================================================================
453 453
454 
-//#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
455 454 
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
456 455
457 
-#if ENABLED(MANUAL_BED_LEVELING)
458 
-  #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
459 
-#endif  // MANUAL_BED_LEVELING
460 
-
461 456 
 #if ENABLED(MESH_BED_LEVELING)
462 457 
   #define MESH_MIN_X 10
463 458 
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
 
@@ -466,6 +461,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
466 461 
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
467 462 
   #define MESH_NUM_Y_POINTS 3
468 463 
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
464 
+
465 
+  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
466 
+
467 
+  #if ENABLED(MANUAL_BED_LEVELING)
468 
+    #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
469 
+  #endif  // MANUAL_BED_LEVELING
470 
+
469 471 
 #endif  // MESH_BED_LEVELING
470 472
471 473 
 //===========================================================================

+ 8
- 6
Marlin/example_configurations/delta/kossel_pro/Configuration.h Parādīt failu 

@@ -435,16 +435,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
435 435 
 #endif
436 436
437 437 
 //===========================================================================
438 
-//=========================== Manual Bed Leveling ===========================
438 
+//============================ Mesh Bed Leveling ============================
439 439 
 //===========================================================================
440 440
441 
-//#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
442 441 
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
443 442
444 
-#if ENABLED(MANUAL_BED_LEVELING)
445 
-  #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
446 
-#endif  // MANUAL_BED_LEVELING
447 
-
448 443 
 #if ENABLED(MESH_BED_LEVELING)
449 444 
   #define MESH_MIN_X 10
450 445 
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
 
@@ -453,6 +448,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
453 448 
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
454 449 
   #define MESH_NUM_Y_POINTS 3
455 450 
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
451 
+
452 
+  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
453 
+
454 
+  #if ENABLED(MANUAL_BED_LEVELING)
455 
+    #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
456 
+  #endif  // MANUAL_BED_LEVELING
457 
+
456 458 
 #endif  // MESH_BED_LEVELING
457 459
458 460 
 //===========================================================================

+ 8
- 6
Marlin/example_configurations/makibox/Configuration.h Parādīt failu 

@@ -416,16 +416,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
416 416 
 #endif
417 417
418 418 
 //===========================================================================
419 
-//=========================== Manual Bed Leveling ===========================
419 
+//============================ Mesh Bed Leveling ============================
420 420 
 //===========================================================================
421 421
422 
-//#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
423 422 
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
424 423
425 
-#if ENABLED(MANUAL_BED_LEVELING)
426 
-  #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
427 
-#endif  // MANUAL_BED_LEVELING
428 
-
429 424 
 #if ENABLED(MESH_BED_LEVELING)
430 425 
   #define MESH_MIN_X 10
431 426 
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
 
@@ -434,6 +429,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
434 429 
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
435 430 
   #define MESH_NUM_Y_POINTS 3
436 431 
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
432 
+
433 
+  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
434 
+
435 
+  #if ENABLED(MANUAL_BED_LEVELING)
436 
+    #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
437 
+  #endif  // MANUAL_BED_LEVELING
438 
+
437 439 
 #endif  // MESH_BED_LEVELING
438 440
439 441 
 //===========================================================================

+ 8
- 6
Marlin/example_configurations/tvrrug/Round2/Configuration.h Parādīt failu 

@@ -403,16 +403,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
403 403 
 #endif
404 404
405 405 
 //===========================================================================
406 
-//=========================== Manual Bed Leveling ===========================
406 
+//============================ Mesh Bed Leveling ============================
407 407 
 //===========================================================================
408 408
409 
-//#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
410 409 
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
411 410
412 
-#if ENABLED(MANUAL_BED_LEVELING)
413 
-  #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
414 
-#endif  // MANUAL_BED_LEVELING
415 
-
416 411 
 #if ENABLED(MESH_BED_LEVELING)
417 412 
   #define MESH_MIN_X 10
418 413 
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
 
@@ -421,6 +416,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
421 416 
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
422 417 
   #define MESH_NUM_Y_POINTS 3
423 418 
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
419 
+
420 
+  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
421 
+
422 
+  #if ENABLED(MANUAL_BED_LEVELING)
423 
+    #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
424 
+  #endif  // MANUAL_BED_LEVELING
425 
+
424 426 
 #endif  // MESH_BED_LEVELING
425 427
426 428 
 //===========================================================================

Rakstīt Priekšskatītījums
Notiek ielāde…
Atcelt
Saglabāt