Config spacing & consistency, group custom LCDs

Marlin/example_configurations/CL-260/Configuration.h

  * Probe Type
  *
  * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc.
- * You must activate one of these to use Auto Bed Leveling below.
+ * Activate one of these to use Auto Bed Leveling below.
  */
 
 /**
 //#define ULTIPANEL
 
 //
-// Cartesio UI
-// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
-//
-//#define CARTESIO_UI
-
-//
 // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
 // http://reprap.org/wiki/PanelOne
 //
 //#define BQ_LCD_SMART_CONTROLLER
 
 //
+// Cartesio UI
+// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
+//
+//#define CARTESIO_UI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C
 //#define U8GLIB_SSD1306
 
 //
+// TinyBoy2 128x64 OLED / Encoder Panel
+//
+//#define OLED_PANEL_TINYBOY2
+
+//
 // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
 //
 //#define SAV_3DGLCD
 //
 //#define SAV_3DLCD
 
-//
-// TinyBoy2 128x64 OLED / Encoder Panel
-//
-//#define OLED_PANEL_TINYBOY2
-
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================

Marlin/example_configurations/Cartesio/Configuration.h

 //#define ULTIPANEL
 
 //
-// Cartesio UI
-// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
-//
-#define CARTESIO_UI
-
-//
 // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
 // http://reprap.org/wiki/PanelOne
 //
 //#define BQ_LCD_SMART_CONTROLLER
 
 //
+// Cartesio UI
+// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
+//
+#define CARTESIO_UI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C
 //#define U8GLIB_SSD1306
 
 //
+// TinyBoy2 128x64 OLED / Encoder Panel
+//
+//#define OLED_PANEL_TINYBOY2
+
+//
 // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
 //
 //#define SAV_3DGLCD
 //
 //#define SAV_3DLCD
 
-//
-// TinyBoy2 128x64 OLED / Encoder Panel
-//
-//#define OLED_PANEL_TINYBOY2
-
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================

Marlin/example_configurations/Cartesio/Configuration_adv.h

   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
-//Show Temperature ADC value
-//The M105 command return, besides traditional information, the ADC value read from temperature sensors.
+// Show Temperature ADC value
+// Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
 
 /**

Marlin/example_configurations/Felix/Configuration.h

 //#define ULTIPANEL
 
 //
-// Cartesio UI
-// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
-//
-//#define CARTESIO_UI
-
-//
 // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
 // http://reprap.org/wiki/PanelOne
 //
 //#define BQ_LCD_SMART_CONTROLLER
 
 //
+// Cartesio UI
+// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
+//
+//#define CARTESIO_UI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C
 //#define U8GLIB_SSD1306
 
 //
+// TinyBoy2 128x64 OLED / Encoder Panel
+//
+//#define OLED_PANEL_TINYBOY2
+
+//
 // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
 //
 //#define SAV_3DGLCD
 //
 //#define SAV_3DLCD
 
-//
-// TinyBoy2 128x64 OLED / Encoder Panel
-//
-//#define OLED_PANEL_TINYBOY2
-
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================

Marlin/example_configurations/Felix/Configuration_adv.h

   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
-//Show Temperature ADC value
-//The M105 command return, besides traditional information, the ADC value read from temperature sensors.
+// Show Temperature ADC value
+// Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
 
 /**

Marlin/example_configurations/Felix/DUAL/Configuration.h

 //#define ULTIPANEL
 
 //
-// Cartesio UI
-// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
-//
-//#define CARTESIO_UI
-
-//
 // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
 // http://reprap.org/wiki/PanelOne
 //
 //#define BQ_LCD_SMART_CONTROLLER
 
 //
+// Cartesio UI
+// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
+//
+//#define CARTESIO_UI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C
 //#define U8GLIB_SSD1306
 
 //
+// TinyBoy2 128x64 OLED / Encoder Panel
+//
+//#define OLED_PANEL_TINYBOY2
+
+//
 // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
 //
 //#define SAV_3DGLCD
 //
 //#define SAV_3DLCD
 
-//
-// TinyBoy2 128x64 OLED / Encoder Panel
-//
-//#define OLED_PANEL_TINYBOY2
-
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================

Marlin/example_configurations/FolgerTech-i3-2020/Configuration.h

 //#define ULTIPANEL
 
 //
-// Cartesio UI
-// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
-//
-//#define CARTESIO_UI
-
-//
 // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
 // http://reprap.org/wiki/PanelOne
 //
 //#define BQ_LCD_SMART_CONTROLLER
 
 //
+// Cartesio UI
+// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
+//
+//#define CARTESIO_UI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C
 //#define U8GLIB_SSD1306
 
 //
+// TinyBoy2 128x64 OLED / Encoder Panel
+//
+//#define OLED_PANEL_TINYBOY2
+
+//
 // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
 //
 //#define SAV_3DGLCD
 //
 //#define SAV_3DLCD
 
-//
-// TinyBoy2 128x64 OLED / Encoder Panel
-//
-//#define OLED_PANEL_TINYBOY2
-
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================

Marlin/example_configurations/FolgerTech-i3-2020/Configuration_adv.h

   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
-//Show Temperature ADC value
-//The M105 command return, besides traditional information, the ADC value read from temperature sensors.
+// Show Temperature ADC value
+// Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
 
 /**

Marlin/example_configurations/Hephestos/Configuration.h

 //#define ULTIPANEL
 
 //
-// Cartesio UI
-// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
-//
-//#define CARTESIO_UI
-
-//
 // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
 // http://reprap.org/wiki/PanelOne
 //
 //#define BQ_LCD_SMART_CONTROLLER
 
 //
+// Cartesio UI
+// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
+//
+//#define CARTESIO_UI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C
 //#define U8GLIB_SSD1306
 
 //
+// TinyBoy2 128x64 OLED / Encoder Panel
+//
+//#define OLED_PANEL_TINYBOY2
+
+//
 // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
 //
 //#define SAV_3DGLCD
 //
 //#define SAV_3DLCD
 
-//
-// TinyBoy2 128x64 OLED / Encoder Panel
-//
-//#define OLED_PANEL_TINYBOY2
-
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================

Marlin/example_configurations/Hephestos/Configuration_adv.h

   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
-//Show Temperature ADC value
-//The M105 command return, besides traditional information, the ADC value read from temperature sensors.
+// Show Temperature ADC value
+// Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
 
 /**

Marlin/example_configurations/Hephestos_2/Configuration.h

 //#define ULTIPANEL
 
 //
-// Cartesio UI
-// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
-//
-//#define CARTESIO_UI
-
-//
 // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
 // http://reprap.org/wiki/PanelOne
 //
 #define BQ_LCD_SMART_CONTROLLER
 
 //
+// Cartesio UI
+// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
+//
+//#define CARTESIO_UI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C
 //#define U8GLIB_SSD1306
 
 //
+// TinyBoy2 128x64 OLED / Encoder Panel
+//
+//#define OLED_PANEL_TINYBOY2
+
+//
 // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
 //
 //#define SAV_3DGLCD
 //
 //#define SAV_3DLCD
 
-//
-// TinyBoy2 128x64 OLED / Encoder Panel
-//
-//#define OLED_PANEL_TINYBOY2
-
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================

Marlin/example_configurations/Hephestos_2/Configuration_adv.h

   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
-//Show Temperature ADC value
-//The M105 command return, besides traditional information, the ADC value read from temperature sensors.
+// Show Temperature ADC value
+// Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
 
 /**

Marlin/example_configurations/K8200/Configuration.h

 //#define ULTIPANEL
 
 //
-// Cartesio UI
-// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
-//
-//#define CARTESIO_UI
-
-//
 // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
 // http://reprap.org/wiki/PanelOne
 //
 //#define BQ_LCD_SMART_CONTROLLER
 
 //
+// Cartesio UI
+// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
+//
+//#define CARTESIO_UI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C
 //#define U8GLIB_SSD1306
 
 //
+// TinyBoy2 128x64 OLED / Encoder Panel
+//
+//#define OLED_PANEL_TINYBOY2
+
+//
 // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
 //
 //#define SAV_3DGLCD

Marlin/example_configurations/K8200/Configuration_adv.h

   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
-//Show Temperature ADC value
-//The M105 command return, besides traditional information, the ADC value read from temperature sensors.
+// Show Temperature ADC value
+// Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
 
 /**

Marlin/example_configurations/K8400/Configuration.h

 //#define ULTIPANEL
 
 //
-// Cartesio UI
-// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
-//
-//#define CARTESIO_UI
-
-//
 // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
 // http://reprap.org/wiki/PanelOne
 //
 //#define BQ_LCD_SMART_CONTROLLER
 
 //
+// Cartesio UI
+// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
+//
+//#define CARTESIO_UI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C
 //#define U8GLIB_SSD1306
 
 //
+// TinyBoy2 128x64 OLED / Encoder Panel
+//
+//#define OLED_PANEL_TINYBOY2
+
+//
 // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
 //
 //#define SAV_3DGLCD
 //
 //#define SAV_3DLCD
 
-//
-// TinyBoy2 128x64 OLED / Encoder Panel
-//
-//#define OLED_PANEL_TINYBOY2
-
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================

Marlin/example_configurations/K8400/Configuration_adv.h

   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
-//Show Temperature ADC value
-//The M105 command return, besides traditional information, the ADC value read from temperature sensors.
+// Show Temperature ADC value
+// Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
 
 /**

Marlin/example_configurations/K8400/Dual-head/Configuration.h

 //#define ULTIPANEL
 
 //
-// Cartesio UI
-// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
-//
-//#define CARTESIO_UI
-
-//
 // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
 // http://reprap.org/wiki/PanelOne
 //
 //#define BQ_LCD_SMART_CONTROLLER
 
 //
+// Cartesio UI
+// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
+//
+//#define CARTESIO_UI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C
 //#define U8GLIB_SSD1306
 
 //
+// TinyBoy2 128x64 OLED / Encoder Panel
+//
+//#define OLED_PANEL_TINYBOY2
+
+//
 // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
 //
 //#define SAV_3DGLCD
 //
 //#define SAV_3DLCD
 
-//
-// TinyBoy2 128x64 OLED / Encoder Panel
-//
-//#define OLED_PANEL_TINYBOY2
-
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================

Marlin/example_configurations/M150/Configuration.h

  * Probe Type
  *
  * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc.
- * You must activate one of these to use Auto Bed Leveling below.
+ * Activate one of these to use Auto Bed Leveling below.
  */
 
 /**
 //#define ULTIPANEL
 
 //
-// Cartesio UI
-// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
-//
-//#define CARTESIO_UI
-
-//
 // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
 // http://reprap.org/wiki/PanelOne
 //
 //#define BQ_LCD_SMART_CONTROLLER
 
 //
+// Cartesio UI
+// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
+//
+//#define CARTESIO_UI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C
 //#define U8GLIB_SSD1306
 
 //
+// TinyBoy2 128x64 OLED / Encoder Panel
+//
+//#define OLED_PANEL_TINYBOY2
+
+//
 // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
 //
 //#define SAV_3DGLCD
 //
 //#define SAV_3DLCD
 
-//
-// TinyBoy2 128x64 OLED / Encoder Panel
-//
-//#define OLED_PANEL_TINYBOY2
-
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================

Marlin/example_configurations/M150/Configuration_adv.h

   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
-//Show Temperature ADC value
-//The M105 command return, besides traditional information, the ADC value read from temperature sensors.
+// Show Temperature ADC value
+// Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
 
 /**

Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h

 //#define ULTIPANEL
 
 //
-// Cartesio UI
-// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
-//
-//#define CARTESIO_UI
-
-//
 // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
 // http://reprap.org/wiki/PanelOne
 //
 //#define BQ_LCD_SMART_CONTROLLER
 
 //
+// Cartesio UI
+// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
+//
+//#define CARTESIO_UI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C
 //#define U8GLIB_SSD1306
 
 //
+// TinyBoy2 128x64 OLED / Encoder Panel
+//
+//#define OLED_PANEL_TINYBOY2
+
+//
 // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
 //
 //#define SAV_3DGLCD
 //
 //#define SAV_3DLCD
 
-//
-// TinyBoy2 128x64 OLED / Encoder Panel
-//
-//#define OLED_PANEL_TINYBOY2
-
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================

Marlin/example_configurations/RigidBot/Configuration.h

 //#define ULTIPANEL
 
 //
-// Cartesio UI
-// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
-//
-//#define CARTESIO_UI
-
-//
 // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
 // http://reprap.org/wiki/PanelOne
 //
 //#define BQ_LCD_SMART_CONTROLLER
 
 //
+// Cartesio UI
+// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
+//
+//#define CARTESIO_UI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C
 //#define U8GLIB_SSD1306
 
 //
+// TinyBoy2 128x64 OLED / Encoder Panel
+//
+//#define OLED_PANEL_TINYBOY2
+
+//
 // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
 //
 //#define SAV_3DGLCD
 //
 //#define SAV_3DLCD
 
-//
-// TinyBoy2 128x64 OLED / Encoder Panel
-//
-//#define OLED_PANEL_TINYBOY2
-
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================

Marlin/example_configurations/RigidBot/Configuration_adv.h

   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
-//Show Temperature ADC value
-//The M105 command return, besides traditional information, the ADC value read from temperature sensors.
+// Show Temperature ADC value
+// Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
 
 /**

Marlin/example_configurations/SCARA/Configuration.h

 //#define ULTIPANEL
 
 //
-// Cartesio UI
-// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
-//
-//#define CARTESIO_UI
-
-//
 // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
 // http://reprap.org/wiki/PanelOne
 //
 //#define BQ_LCD_SMART_CONTROLLER
 
 //
+// Cartesio UI
+// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
+//
+//#define CARTESIO_UI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C
 //#define U8GLIB_SSD1306
 
 //
+// TinyBoy2 128x64 OLED / Encoder Panel
+//
+//#define OLED_PANEL_TINYBOY2
+
+//
 // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
 //
 //#define SAV_3DGLCD
 //
 //#define SAV_3DLCD
 
-//
-// TinyBoy2 128x64 OLED / Encoder Panel
-//
-//#define OLED_PANEL_TINYBOY2
-
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================

Marlin/example_configurations/SCARA/Configuration_adv.h

   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
-//Show Temperature ADC value
-//The M105 command return, besides traditional information, the ADC value read from temperature sensors.
+// Show Temperature ADC value
+// Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
 
 /**

Marlin/example_configurations/TAZ4/Configuration.h

 //#define ULTIPANEL
 
 //
-// Cartesio UI
-// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
-//
-//#define CARTESIO_UI
-
-//
 // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
 // http://reprap.org/wiki/PanelOne
 //
 //#define BQ_LCD_SMART_CONTROLLER
 
 //
+// Cartesio UI
+// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
+//
+//#define CARTESIO_UI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C
 //#define U8GLIB_SSD1306
 
 //
+// TinyBoy2 128x64 OLED / Encoder Panel
+//
+//#define OLED_PANEL_TINYBOY2
+
+//
 // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
 //
 //#define SAV_3DGLCD
 //
 //#define SAV_3DLCD
 
-//
-// TinyBoy2 128x64 OLED / Encoder Panel
-//
-//#define OLED_PANEL_TINYBOY2
-
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================

Marlin/example_configurations/TAZ4/Configuration_adv.h

   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
-//Show Temperature ADC value
-//The M105 command return, besides traditional information, the ADC value read from temperature sensors.
+// Show Temperature ADC value
+// Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
 
 /**

Marlin/example_configurations/TinyBoy2/Configuration.h

 //#define ULTIPANEL
 
 //
-// Cartesio UI
-// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
-//
-//#define CARTESIO_UI
-
-//
 // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
 // http://reprap.org/wiki/PanelOne
 //
 //#define BQ_LCD_SMART_CONTROLLER
 
 //
+// Cartesio UI
+// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
+//
+//#define CARTESIO_UI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C
 //#define U8GLIB_SSD1306
 
 //
+// TinyBoy2 128x64 OLED / Encoder Panel
+//
+//#define OLED_PANEL_TINYBOY2
+
+//
 // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
 //
 //#define SAV_3DGLCD

Marlin/example_configurations/TinyBoy2/Configuration_adv.h

   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
-//Show Temperature ADC value
-//The M105 command return, besides traditional information, the ADC value read from temperature sensors.
+// Show Temperature ADC value
+// Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
 
 /**

Marlin/example_configurations/WITBOX/Configuration.h

 //#define ULTIPANEL
 
 //
-// Cartesio UI
-// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
-//
-//#define CARTESIO_UI
-
-//
 // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
 // http://reprap.org/wiki/PanelOne
 //
 //#define BQ_LCD_SMART_CONTROLLER
 
 //
+// Cartesio UI
+// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
+//
+//#define CARTESIO_UI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C
 //#define U8GLIB_SSD1306
 
 //
+// TinyBoy2 128x64 OLED / Encoder Panel
+//
+//#define OLED_PANEL_TINYBOY2
+
+//
 // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
 //
 //#define SAV_3DGLCD
 //
 //#define SAV_3DLCD
 
-//
-// TinyBoy2 128x64 OLED / Encoder Panel
-//
-//#define OLED_PANEL_TINYBOY2
-
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================

Marlin/example_configurations/WITBOX/Configuration_adv.h

   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
-//Show Temperature ADC value
-//The M105 command return, besides traditional information, the ADC value read from temperature sensors.
+// Show Temperature ADC value
+// Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
 
 /**

Marlin/example_configurations/adafruit/ST7565/Configuration.h

 //#define ULTIPANEL
 
 //
-// Cartesio UI
-// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
-//
-//#define CARTESIO_UI
-
-//
 // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
 // http://reprap.org/wiki/PanelOne
 //
 //#define BQ_LCD_SMART_CONTROLLER
 
 //
+// Cartesio UI
+// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
+//
+//#define CARTESIO_UI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C
 //#define U8GLIB_SSD1306
 
 //
+// TinyBoy2 128x64 OLED / Encoder Panel
+//
+//#define OLED_PANEL_TINYBOY2
+
+//
 // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
 //
 //#define SAV_3DGLCD
 //
 //#define SAV_3DLCD
 
-//
-// TinyBoy2 128x64 OLED / Encoder Panel
-//
-//#define OLED_PANEL_TINYBOY2
-
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================

Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h

 //#define ULTIPANEL
 
 //
-// Cartesio UI
-// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
-//
-//#define CARTESIO_UI
-
-//
 // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
 // http://reprap.org/wiki/PanelOne
 //
 //#define BQ_LCD_SMART_CONTROLLER
 
 //
+// Cartesio UI
+// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
+//
+//#define CARTESIO_UI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C
 //#define U8GLIB_SSD1306
 
 //
+// TinyBoy2 128x64 OLED / Encoder Panel
+//
+//#define OLED_PANEL_TINYBOY2
+
+//
 // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
 //
 //#define SAV_3DGLCD
 //
 //#define SAV_3DLCD
 
-//
-// TinyBoy2 128x64 OLED / Encoder Panel
-//
-//#define OLED_PANEL_TINYBOY2
-
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================

Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h

   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
-//Show Temperature ADC value
-//The M105 command return, besides traditional information, the ADC value read from temperature sensors.
+// Show Temperature ADC value
+// Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
 
 /**

Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h

 //#define ULTIPANEL
 
 //
-// Cartesio UI
-// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
-//
-//#define CARTESIO_UI
-
-//
 // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
 // http://reprap.org/wiki/PanelOne
 //
 //#define BQ_LCD_SMART_CONTROLLER
 
 //
+// Cartesio UI
+// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
+//
+//#define CARTESIO_UI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C
 //#define U8GLIB_SSD1306
 
 //
+// TinyBoy2 128x64 OLED / Encoder Panel
+//
+//#define OLED_PANEL_TINYBOY2
+
+//
 // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
 //
 //#define SAV_3DGLCD
 //
 //#define SAV_3DLCD
 
-//
-// TinyBoy2 128x64 OLED / Encoder Panel
-//
-//#define OLED_PANEL_TINYBOY2
-
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================

Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h

   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
-//Show Temperature ADC value
-//The M105 command return, besides traditional information, the ADC value read from temperature sensors.
+// Show Temperature ADC value
+// Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
 
 /**

Marlin/example_configurations/delta/generic/Configuration.h

 //#define ULTIPANEL
 
 //
-// Cartesio UI
-// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
-//
-//#define CARTESIO_UI
-
-//
 // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
 // http://reprap.org/wiki/PanelOne
 //
 //#define BQ_LCD_SMART_CONTROLLER
 
 //
+// Cartesio UI
+// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
+//
+//#define CARTESIO_UI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C
 //#define U8GLIB_SSD1306
 
 //
+// TinyBoy2 128x64 OLED / Encoder Panel
+//
+//#define OLED_PANEL_TINYBOY2
+
+//
 // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
 //
 //#define SAV_3DGLCD
 //
 //#define SAV_3DLCD
 
-//
-// TinyBoy2 128x64 OLED / Encoder Panel
-//
-//#define OLED_PANEL_TINYBOY2
-
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================

Marlin/example_configurations/delta/generic/Configuration_adv.h

   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
-//Show Temperature ADC value
-//The M105 command return, besides traditional information, the ADC value read from temperature sensors.
+// Show Temperature ADC value
+// Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
 
 /**

Marlin/example_configurations/delta/kossel_mini/Configuration.h

 //#define ULTIPANEL
 
 //
-// Cartesio UI
-// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
-//
-//#define CARTESIO_UI
-
-//
 // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
 // http://reprap.org/wiki/PanelOne
 //
 //#define BQ_LCD_SMART_CONTROLLER
 
 //
+// Cartesio UI
+// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
+//
+//#define CARTESIO_UI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C
 //#define U8GLIB_SSD1306
 
 //
+// TinyBoy2 128x64 OLED / Encoder Panel
+//
+//#define OLED_PANEL_TINYBOY2
+
+//
 // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
 //
 //#define SAV_3DGLCD
 //
 //#define SAV_3DLCD
 
-//
-// TinyBoy2 128x64 OLED / Encoder Panel
-//
-//#define OLED_PANEL_TINYBOY2
-
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================

Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h

   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
-//Show Temperature ADC value
-//The M105 command return, besides traditional information, the ADC value read from temperature sensors.
+// Show Temperature ADC value
+// Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
 
 /**

Marlin/example_configurations/delta/kossel_pro/Configuration.h

 //#define ULTIPANEL
 
 //
-// Cartesio UI
-// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
-//
-//#define CARTESIO_UI
-
-//
 // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
 // http://reprap.org/wiki/PanelOne
 //
 //#define BQ_LCD_SMART_CONTROLLER
 
 //
+// Cartesio UI
+// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
+//
+//#define CARTESIO_UI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C
 //#define U8GLIB_SSD1306
 
 //
+// TinyBoy2 128x64 OLED / Encoder Panel
+//
+//#define OLED_PANEL_TINYBOY2
+
+//
 // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
 //
 //#define SAV_3DGLCD
 //
 //#define SAV_3DLCD
 
-//
-// TinyBoy2 128x64 OLED / Encoder Panel
-//
-//#define OLED_PANEL_TINYBOY2
-
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================

Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h

   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
-//Show Temperature ADC value
-//The M105 command return, besides traditional information, the ADC value read from temperature sensors.
+// Show Temperature ADC value
+// Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
 
 /**

Marlin/example_configurations/delta/kossel_xl/Configuration.h

 //#define ULTIPANEL
 
 //
-// Cartesio UI
-// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
-//
-//#define CARTESIO_UI
-
-//
 // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
 // http://reprap.org/wiki/PanelOne
 //
 //#define BQ_LCD_SMART_CONTROLLER
 
 //
+// Cartesio UI
+// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
+//
+//#define CARTESIO_UI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C
 //#define U8GLIB_SSD1306
 
 //
+// TinyBoy2 128x64 OLED / Encoder Panel
+//
+//#define OLED_PANEL_TINYBOY2
+
+//
 // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
 //
 //#define SAV_3DGLCD
 //
 //#define SAV_3DLCD
 
-//
-// TinyBoy2 128x64 OLED / Encoder Panel
-//
-//#define OLED_PANEL_TINYBOY2
-
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================

Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h

   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
-//Show Temperature ADC value
-//The M105 command return, besides traditional information, the ADC value read from temperature sensors.
+// Show Temperature ADC value
+// Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
 
 /**

Marlin/example_configurations/gCreate_gMax1.5+/Configuration.h

 //#define Z_MIN_PROBE_ENDSTOP
 
 /**
- *   Probe Type
+ * Probe Type
  *
- *   Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc.
- *   You must activate one of these to use Auto Bed Leveling below.
+ * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc.
+ * Activate one of these to use Auto Bed Leveling below.
  */
 
 /**
 //#define ULTIPANEL
 
 //
-// Cartesio UI
-// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
-//
-//#define CARTESIO_UI
-
-//
 // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
 // http://reprap.org/wiki/PanelOne
 //
 //#define BQ_LCD_SMART_CONTROLLER
 
 //
+// Cartesio UI
+// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
+//
+//#define CARTESIO_UI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C
 //#define U8GLIB_SSD1306
 
 //
+// TinyBoy2 128x64 OLED / Encoder Panel
+//
+//#define OLED_PANEL_TINYBOY2
+
+//
 // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
 //
 //#define SAV_3DGLCD
 //
 //#define SAV_3DLCD
 
-//
-// TinyBoy2 128x64 OLED / Encoder Panel
-//
-//#define OLED_PANEL_TINYBOY2
-
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================

Marlin/example_configurations/gCreate_gMax1.5+/Configuration_adv.h

   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
-//Show Temperature ADC value
-//The M105 command return, besides traditional information, the ADC value read from temperature sensors.
+// Show Temperature ADC value
+// Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
 
 /**

Marlin/example_configurations/makibox/Configuration.h

 //#define ULTIPANEL
 
 //
-// Cartesio UI
-// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
-//
-//#define CARTESIO_UI
-
-//
 // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
 // http://reprap.org/wiki/PanelOne
 //
 //#define BQ_LCD_SMART_CONTROLLER
 
 //
+// Cartesio UI
+// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
+//
+//#define CARTESIO_UI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C
 //#define U8GLIB_SSD1306
 
 //
+// TinyBoy2 128x64 OLED / Encoder Panel
+//
+//#define OLED_PANEL_TINYBOY2
+
+//
 // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
 //
 //#define SAV_3DGLCD
 //
 //#define SAV_3DLCD
 
-//
-// TinyBoy2 128x64 OLED / Encoder Panel
-//
-//#define OLED_PANEL_TINYBOY2
-
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================

Marlin/example_configurations/makibox/Configuration_adv.h

   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
-//Show Temperature ADC value
-//The M105 command return, besides traditional information, the ADC value read from temperature sensors.
+// Show Temperature ADC value
+// Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
 
 /**

Marlin/example_configurations/tvrrug/Round2/Configuration.h

 //#define ULTIPANEL
 
 //
-// Cartesio UI
-// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
-//
-//#define CARTESIO_UI
-
-//
 // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
 // http://reprap.org/wiki/PanelOne
 //
 //#define BQ_LCD_SMART_CONTROLLER
 
 //
+// Cartesio UI
+// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
+//
+//#define CARTESIO_UI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C
 //#define U8GLIB_SSD1306
 
 //
+// TinyBoy2 128x64 OLED / Encoder Panel
+//
+//#define OLED_PANEL_TINYBOY2
+
+//
 // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
 //
 //#define SAV_3DGLCD
 //
 //#define SAV_3DLCD
 
-//
-// TinyBoy2 128x64 OLED / Encoder Panel
-//
-//#define OLED_PANEL_TINYBOY2
-
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================

Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h

   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
-//Show Temperature ADC value
-//The M105 command return, besides traditional information, the ADC value read from temperature sensors.
+// Show Temperature ADC value
+// Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
 
 /**

Marlin/example_configurations/wt150/Configuration.h

  * Probe Type
  *
  * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc.
- * You must activate one of these to use Auto Bed Leveling below.
+ * Activate one of these to use Auto Bed Leveling below.
  */
 
 /**
 //#define ULTIPANEL
 
 //
-// Cartesio UI
-// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
-//
-//#define CARTESIO_UI
-
-//
 // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
 // http://reprap.org/wiki/PanelOne
 //
 //#define BQ_LCD_SMART_CONTROLLER
 
 //
+// Cartesio UI
+// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
+//
+//#define CARTESIO_UI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C
 //#define U8GLIB_SSD1306
 
 //
+// TinyBoy2 128x64 OLED / Encoder Panel
+//
+//#define OLED_PANEL_TINYBOY2
+
+//
 // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
 //
 //#define SAV_3DGLCD
 //
 //#define SAV_3DLCD
 
-//
-// TinyBoy2 128x64 OLED / Encoder Panel
-//
-//#define OLED_PANEL_TINYBOY2
-
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================

Marlin/example_configurations/wt150/Configuration_adv.h

   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
-//Show Temperature ADC value
-//The M105 command return, besides traditional information, the ADC value read from temperature sensors.
+// Show Temperature ADC value
+// Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
 
 /**