SPEED => FEEDRATE (#21217)

Marlin/Configuration.h

 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed (mm/min) between probes
-#define XY_PROBE_SPEED (133*60)
+#define XY_PROBE_FEEDRATE (133*60)
 
 // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2)
-#define Z_PROBE_SPEED_FAST (4*60)
+#define Z_PROBE_FEEDRATE_FAST (4*60)
 
 // Feedrate (mm/min) for the "accurate" probe of each point
-#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
+#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2)
 
 /**
  * Probe Activation Switch

Marlin/Configuration_adv.h

       // increments while checking for the contact to be broken.
       #define BACKLASH_MEASUREMENT_LIMIT       0.5   // (mm)
       #define BACKLASH_MEASUREMENT_RESOLUTION  0.005 // (mm)
-      #define BACKLASH_MEASUREMENT_FEEDRATE    Z_PROBE_SPEED_SLOW // (mm/min)
+      #define BACKLASH_MEASUREMENT_FEEDRATE    Z_PROBE_FEEDRATE_SLOW // (mm/min)
     #endif
   #endif
 #endif

Marlin/src/gcode/bedlevel/abl/G29.cpp

 
     #if ABL_GRID
 
-      xy_probe_feedrate_mm_s = MMM_TO_MMS(parser.linearval('S', XY_PROBE_SPEED));
+      xy_probe_feedrate_mm_s = MMM_TO_MMS(parser.linearval('S', XY_PROBE_FEEDRATE));
 
       const float x_min = probe.min_x(), x_max = probe.max_x(),
                   y_min = probe.min_y(), y_max = probe.max_y();

Marlin/src/inc/Conditionals_post.h

   #ifndef Z_PROBE_OFFSET_RANGE_MAX
     #define Z_PROBE_OFFSET_RANGE_MAX 20
   #endif
-  #ifndef XY_PROBE_SPEED
-    #define XY_PROBE_SPEED ((homing_feedrate_mm_m.x + homing_feedrate_mm_m.y) / 2)
+  #ifndef XY_PROBE_FEEDRATE
+    #define XY_PROBE_FEEDRATE ((homing_feedrate_mm_m.x + homing_feedrate_mm_m.y) / 2)
   #endif
   #ifndef NOZZLE_TO_PROBE_OFFSET
     #define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 }

Marlin/src/inc/SanityCheck.h

 #elif defined(DEFAULT_XYJERK)
   #error "DEFAULT_XYJERK is deprecated. Use DEFAULT_XJERK and DEFAULT_YJERK instead."
 #elif defined(XY_TRAVEL_SPEED)
-  #error "XY_TRAVEL_SPEED is deprecated. Use XY_PROBE_SPEED instead."
+  #error "XY_TRAVEL_SPEED is now XY_PROBE_FEEDRATE."
+#elif defined(XY_PROBE_SPEED)
+  #error "XY_PROBE_SPEED is now XY_PROBE_FEEDRATE."
+#elif defined(Z_PROBE_SPEED_FAST)
+  #error "Z_PROBE_SPEED_FAST is now Z_PROBE_FEEDRATE_FAST."
+#elif defined(Z_PROBE_SPEED_SLOW)
+  #error "Z_PROBE_SPEED_SLOW is now Z_PROBE_FEEDRATE_SLOW."
 #elif defined(PROBE_SERVO_DEACTIVATION_DELAY)
   #error "PROBE_SERVO_DEACTIVATION_DELAY is deprecated. Use DEACTIVATE_SERVOS_AFTER_MOVE instead."
 #elif defined(SERVO_DEACTIVATION_DELAY)

Marlin/src/lcd/menu/menu_bed_corners.cpp

   bool _lcd_level_bed_corners_probe(bool verify=false) {
     if (verify) do_blocking_move_to_z(current_position.z + LEVEL_CORNERS_Z_HOP); // do clearance if needed
     TERN_(BLTOUCH_SLOW_MODE, bltouch.deploy()); // Deploy in LOW SPEED MODE on every probe action
-    do_blocking_move_to_z(last_z - LEVEL_CORNERS_PROBE_TOLERANCE, MMM_TO_MMS(Z_PROBE_SPEED_SLOW)); // Move down to lower tolerance
+    do_blocking_move_to_z(last_z - LEVEL_CORNERS_PROBE_TOLERANCE, MMM_TO_MMS(Z_PROBE_FEEDRATE_SLOW)); // Move down to lower tolerance
     if (TEST(endstops.trigger_state(), TERN(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN, Z_MIN, Z_MIN_PROBE))) { // check if probe triggered
       endstops.hit_on_purpose();
       set_current_from_steppers_for_axis(Z_AXIS);

Marlin/src/lcd/menu/menu_probe_offset.cpp

   // Move Nozzle to Probing/Homing Position
   ui.wait_for_move = true;
   current_position += probe.offset_xy;
-  line_to_current_position(MMM_TO_MMS(XY_PROBE_SPEED));
+  line_to_current_position(MMM_TO_MMS(XY_PROBE_FEEDRATE));
   ui.synchronize(GET_TEXT(MSG_PROBE_WIZARD_MOVING));
   ui.wait_for_move = false;
 

Marlin/src/module/motion.cpp

 #endif
 
 #if HAS_ABL_NOT_UBL
-  feedRate_t xy_probe_feedrate_mm_s = MMM_TO_MMS(XY_PROBE_SPEED);
+  feedRate_t xy_probe_feedrate_mm_s = MMM_TO_MMS(XY_PROBE_FEEDRATE);
 #endif
 
 /**
    */
   feedRate_t get_homing_bump_feedrate(const AxisEnum axis) {
     #if HOMING_Z_WITH_PROBE
-      if (axis == Z_AXIS) return MMM_TO_MMS(Z_PROBE_SPEED_SLOW);
+      if (axis == Z_AXIS) return MMM_TO_MMS(Z_PROBE_FEEDRATE_SLOW);
     #endif
     static const uint8_t homing_bump_divisor[] PROGMEM = HOMING_BUMP_DIVISOR;
     uint8_t hbd = pgm_read_byte(&homing_bump_divisor[axis]);
     if (bump) {
       // Move away from the endstop by the axis HOMING_BUMP_MM
       if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("Move Away: ", -bump, "mm");
-      do_homing_move(axis, -bump, TERN0(HOMING_Z_WITH_PROBE, axis == Z_AXIS) ? MMM_TO_MMS(Z_PROBE_SPEED_FAST) : 0, false);
+      do_homing_move(axis, -bump, TERN0(HOMING_Z_WITH_PROBE, axis == Z_AXIS) ? MMM_TO_MMS(Z_PROBE_FEEDRATE_FAST) : 0, false);
 
       #if ENABLED(DETECT_BROKEN_ENDSTOP)
         // Check for a broken endstop

Marlin/src/module/motion.h

 #if HAS_ABL_NOT_UBL
   extern feedRate_t xy_probe_feedrate_mm_s;
   #define XY_PROBE_FEEDRATE_MM_S xy_probe_feedrate_mm_s
-#elif defined(XY_PROBE_SPEED)
-  #define XY_PROBE_FEEDRATE_MM_S MMM_TO_MMS(XY_PROBE_SPEED)
+#elif defined(XY_PROBE_FEEDRATE)
+  #define XY_PROBE_FEEDRATE_MM_S MMM_TO_MMS(XY_PROBE_FEEDRATE)
 #else
   #define XY_PROBE_FEEDRATE_MM_S PLANNER_XY_FEEDRATE()
 #endif
 
-constexpr feedRate_t z_probe_fast_mm_s = MMM_TO_MMS(Z_PROBE_SPEED_FAST);
+constexpr feedRate_t z_probe_fast_mm_s = MMM_TO_MMS(Z_PROBE_FEEDRATE_FAST);
 
 /**
  * Feed rates are often configured with mm/m

Marlin/src/module/probe.cpp

     // Raise to give the probe clearance
     do_blocking_move_to_z(current_position.z + Z_CLEARANCE_MULTI_PROBE, z_probe_fast_mm_s);
 
-  #elif Z_PROBE_SPEED_FAST != Z_PROBE_SPEED_SLOW
+  #elif Z_PROBE_FEEDRATE_FAST != Z_PROBE_FEEDRATE_SLOW
 
     // If the nozzle is well over the travel height then
     // move down quickly before doing the slow probe
       if (TERN0(PROBE_TARE, tare())) return true;
 
       // Probe downward slowly to find the bed
-      if (try_to_probe(PSTR("SLOW"), z_probe_low_point, MMM_TO_MMS(Z_PROBE_SPEED_SLOW),
+      if (try_to_probe(PSTR("SLOW"), z_probe_low_point, MMM_TO_MMS(Z_PROBE_FEEDRATE_SLOW),
                        sanity_check, Z_CLEARANCE_MULTI_PROBE) ) return NAN;
 
       TERN_(MEASURE_BACKLASH_WHEN_PROBING, backlash.measure_with_probe());