Touch-MI probe by hotends.fr (#14101)

A simple Z probe using a magnet to deploy a probe. See https://youtu.be/E7Ik9PbKPl0 for the sensor description...

Marlin/Configuration.h

@@ -829,6 +829,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

Marlin/src/core/utility.cpp

@@ -66,6 +66,8 @@ void safe_delay(millis_t ms) {
         "BLTOUCH"
       #elif HAS_Z_SERVO_PROBE
         "SERVO PROBE"
+      #elif ENABLED(TOUCH_MI_PROBE)
+        "TOUCH_MI_PROBE"
       #elif ENABLED(Z_PROBE_SLED)
         "Z_PROBE_SLED"
       #elif ENABLED(Z_PROBE_ALLEN_KEY)

Marlin/src/inc/Conditionals_LCD.h

@@ -502,7 +502,7 @@
 /**
  * Set flags for enabled probes
  */
-#define HAS_BED_PROBE (HAS_Z_SERVO_PROBE || ANY(FIX_MOUNTED_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, SOLENOID_PROBE, SENSORLESS_PROBING, RACK_AND_PINION_PROBE))
+#define HAS_BED_PROBE (HAS_Z_SERVO_PROBE || ANY(FIX_MOUNTED_PROBE, TOUCH_MI_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, SOLENOID_PROBE, SENSORLESS_PROBING, RACK_AND_PINION_PROBE))
 #define PROBE_SELECTED (HAS_BED_PROBE || EITHER(PROBE_MANUALLY, MESH_BED_LEVELING))
 
 #if HAS_BED_PROBE

Marlin/src/inc/SanityCheck.h

@@ -985,11 +985,12 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
   + ENABLED(FIX_MOUNTED_PROBE) \
   + (HAS_Z_SERVO_PROBE && DISABLED(BLTOUCH)) \
   + ENABLED(BLTOUCH) \
+  + ENABLED(TOUCH_MI_PROBE) \
   + ENABLED(SOLENOID_PROBE) \
   + ENABLED(Z_PROBE_ALLEN_KEY) \
   + ENABLED(Z_PROBE_SLED) \
   + ENABLED(RACK_AND_PINION_PROBE)
-  #error "Please enable only one probe option: PROBE_MANUALLY, FIX_MOUNTED_PROBE, BLTOUCH, SOLENOID_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or Z Servo."
+  #error "Please enable only one probe option: PROBE_MANUALLY, FIX_MOUNTED_PROBE, BLTOUCH, TOUCH_MI_PROBE, SOLENOID_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or Z Servo."
 #endif
 
 #if HAS_BED_PROBE
@@ -1047,6 +1048,25 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
   #endif
 
   /**
+   * Touch-MI probe requirements
+   */
+  #if ENABLED(TOUCH_MI_PROBE)
+    #if ENABLED(Z_SAFE_HOMING)
+      #error "TOUCH_MI_PROBE requires Z_SAFE_HOMING."
+    #elif ENABLED(TOUCH_MI_RETRACT_Z)
+      #error "TOUCH_MI_PROBE requires TOUCH_MI_RETRACT_Z."
+    #elif defined(Z_AFTER_PROBING)
+      #error "TOUCH_MI_PROBE requires Z_AFTER_PROBING to be disabled."
+    #elif Z_HOMING_HEIGHT < 10
+      #error "TOUCH_MI_PROBE requires Z_HOMING_HEIGHT >= 10."
+    #elif Z_MIN_PROBE_ENDSTOP_INVERTING
+      #error "TOUCH_MI_PROBE requires Z_MIN_PROBE_ENDSTOP_INVERTING to be set to false."
+    #elif DISABLED(BABYSTEP_ZPROBE_OFFSET)
+      #error "TOUCH_MI_PROBE requires BABYSTEPPING with BABYSTEP_ZPROBE_OFFSET."
+    #endif
+  #endif
+
+  /**
    * Require pin options and pins to be defined
    */
   #if ENABLED(SENSORLESS_PROBING)

Marlin/src/module/probe.cpp

@@ -103,6 +103,26 @@ float zprobe_zoffset; // Initialized by settings.load()
     #endif
   }
 
+#elif ENABLED(TOUCH_MI_PROBE)
+
+  // Move to the magnet to unlock the probe
+  void run_deploy_moves_script() {
+    #ifndef TOUCH_MI_DEPLOY_XPOS
+      #define TOUCH_MI_DEPLOY_XPOS 0
+    #elif X_HOME_DIR > 0 && TOUCH_MI_DEPLOY_XPOS > X_MAX_BED
+      TemporaryGlobalEndstopsState unlock_x(false);
+    #endif
+    do_blocking_move_to_x(TOUCH_MI_DEPLOY_XPOS);
+  }
+
+  // Move down to the bed to stow the probe
+  void run_stow_moves_script() {
+    const float old_pos[] = { current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS] };
+    endstops.enable_z_probe(false);
+    do_blocking_move_to_z(TOUCH_MI_RETRACT_Z, MMM_TO_MMS(HOMING_FEEDRATE_Z));
+    do_blocking_move_to(old_pos, MMM_TO_MMS(HOMING_FEEDRATE_Z));
+  }
+
 #elif ENABLED(Z_PROBE_ALLEN_KEY)
 
   void run_deploy_moves_script() {
@@ -366,7 +386,7 @@ FORCE_INLINE void probe_specific_action(const bool deploy) {
       if (deploy) bltouch.deploy(); else bltouch.stow();
     #endif
 
-  #elif ENABLED(Z_PROBE_ALLEN_KEY)
+  #elif EITHER(TOUCH_MI_PROBE, Z_PROBE_ALLEN_KEY)
 
     deploy ? run_deploy_moves_script() : run_stow_moves_script();
 

config/default/Configuration.h

@@ -829,6 +829,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/3DFabXYZ/Migbot/Configuration.h

@@ -835,6 +835,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/AlephObjects/TAZ4/Configuration.h

@@ -849,6 +849,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/AliExpress/CL-260/Configuration.h

@@ -829,6 +829,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/AliExpress/UM2pExt/Configuration.h

@@ -840,6 +840,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Anet/A2/Configuration.h

@@ -829,6 +829,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Anet/A2plus/Configuration.h

@@ -829,6 +829,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Anet/A6/Configuration.h

@@ -876,6 +876,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Anet/A8/Configuration.h

@@ -842,6 +842,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Anet/A8plus/Configuration.h

@@ -840,6 +840,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Anet/E16/Configuration.h

@@ -841,6 +841,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/AnyCubic/i3/Configuration.h

@@ -839,6 +839,22 @@
  */
 #define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/ArmEd/Configuration.h

@@ -830,6 +830,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Azteeg/X5GT/Configuration.h

@@ -829,6 +829,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/BIBO/TouchX/cyclops/Configuration.h

@@ -829,6 +829,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/BIBO/TouchX/default/Configuration.h

@@ -829,6 +829,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/BQ/Hephestos/Configuration.h

@@ -817,6 +817,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/BQ/Hephestos_2/Configuration.h

@@ -830,6 +830,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/BQ/WITBOX/Configuration.h

@@ -817,6 +817,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Cartesio/Configuration.h

@@ -828,6 +828,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Creality/CR-10/Configuration.h

@@ -839,6 +839,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Creality/CR-10S/Configuration.h

@@ -829,6 +829,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Creality/CR-10_5S/Configuration.h

@@ -830,6 +830,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Creality/CR-10mini/Configuration.h

@@ -848,6 +848,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Creality/CR-8/Configuration.h

@@ -839,6 +839,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Creality/Ender-2/Configuration.h

@@ -833,6 +833,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Creality/Ender-3/Configuration.h

@@ -833,6 +833,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Creality/Ender-4/Configuration.h

@@ -839,6 +839,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Dagoma/Disco Ultimate/Configuration.h

@@ -829,6 +829,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h

@@ -834,6 +834,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Einstart-S/Configuration.h

@@ -838,6 +838,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Felix/Configuration.h

@@ -811,6 +811,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Felix/DUAL/Configuration.h

@@ -811,6 +811,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/FlashForge/CreatorPro/Configuration.h

@@ -821,6 +821,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/FolgerTech/i3-2020/Configuration.h

@@ -835,6 +835,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Formbot/Raptor/Configuration.h

@@ -912,6 +912,22 @@
  */
 #define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Formbot/T_Rex_2+/Configuration.h

@@ -858,6 +858,22 @@
  */
 #define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Formbot/T_Rex_3/Configuration.h

@@ -845,6 +845,22 @@
  */
 #define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Geeetech/A10/Configuration.h

@@ -812,6 +812,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Geeetech/A10M/Configuration.h

@@ -812,6 +812,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Geeetech/A20M/Configuration.h

@@ -812,6 +812,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Geeetech/GT2560/Configuration.h

@@ -844,6 +844,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h

@@ -829,6 +829,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Geeetech/MeCreator2/Configuration.h

@@ -836,6 +836,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h

@@ -849,6 +849,22 @@
  */
 #define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h

@@ -849,6 +849,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Geeetech/Prusa i3 Pro C/Configuration.h

@@ -829,6 +829,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Geeetech/Prusa i3 Pro W/Configuration.h

@@ -829,6 +829,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Infitary/i3-M508/Configuration.h

@@ -833,6 +833,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/JGAurora/A5/Configuration.h

@@ -841,6 +841,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/MakerParts/Configuration.h

@@ -849,6 +849,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Malyan/M150/Configuration.h

@@ -849,6 +849,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Malyan/M200/Configuration.h

@@ -828,6 +828,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Micromake/C1/basic/Configuration.h

@@ -833,6 +833,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Micromake/C1/enhanced/Configuration.h

@@ -833,6 +833,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Mks/Robin/Configuration.h

@@ -830,6 +830,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Mks/Sbase/Configuration.h

@@ -829,6 +829,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Printrbot/PrintrboardG2/Configuration.h

@@ -837,6 +837,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/RapideLite/RL200/Configuration.h

@@ -829,6 +829,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/RepRapPro/Huxley/Configuration.h

@@ -869,6 +869,22 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/RepRapWorld/Megatronics/Configuration.h

@@ -829,6 +829,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/RigidBot/Configuration.h

@@ -827,6 +827,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/SCARA/Configuration.h

@@ -842,6 +842,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/STM32/Black_STM32F407VET6/Configuration.h

@@ -829,6 +829,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/STM32/STM32F10/Configuration.h

@@ -831,6 +831,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/STM32/STM32F4/Configuration.h

@@ -829,6 +829,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/STM32/stm32f103ret6/Configuration.h

@@ -831,6 +831,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Sanguinololu/Configuration.h

@@ -860,6 +860,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/TheBorg/Configuration.h

@@ -829,6 +829,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/TinyBoy2/Configuration.h

@@ -880,6 +880,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Tronxy/X1/Configuration.h

@@ -829,6 +829,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Tronxy/X3A/Configuration.h

@@ -829,6 +829,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Tronxy/X5S-2E/Configuration.h

@@ -850,6 +850,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Tronxy/X5S/Configuration.h

@@ -828,6 +828,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Tronxy/XY100/Configuration.h

@@ -840,6 +840,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/UltiMachine/Archim1/Configuration.h

@@ -829,6 +829,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/UltiMachine/Archim2/Configuration.h

@@ -829,6 +829,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/VORONDesign/Configuration.h

@@ -838,6 +838,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Velleman/K8200/Configuration.h

@@ -858,6 +858,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Velleman/K8400/Configuration.h

@@ -829,6 +829,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Velleman/K8400/Dual-head/Configuration.h

@@ -829,6 +829,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/WASP/PowerWASP/Configuration.h

@@ -848,6 +848,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/Wanhao/Duplicator 6/Configuration.h

@@ -839,6 +839,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/adafruit/ST7565/Configuration.h

@@ -829,6 +829,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/delta/Anycubic/Kossel/Configuration.h

@@ -965,6 +965,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/delta/FLSUN/auto_calibrate/Configuration.h

@@ -911,6 +911,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/delta/FLSUN/kossel/Configuration.h

@@ -911,6 +911,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/delta/FLSUN/kossel_mini/Configuration.h

@@ -911,6 +911,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/delta/Geeetech/Rostock 301/Configuration.h

@@ -901,6 +901,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/delta/Hatchbox_Alpha/Configuration.h

@@ -916,6 +916,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/delta/MKS/SBASE/Configuration.h

@@ -901,6 +901,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/delta/Tevo Little Monster/Configuration.h

@@ -905,6 +905,22 @@
  */
 #define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/delta/generic/Configuration.h

@@ -901,6 +901,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 

config/examples/delta/kossel_mini/Configuration.h

@@ -901,6 +901,22 @@
  */
 //#define BLTOUCH
 
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ *                MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+  #define TOUCH_MI_RETRACT_Z 0.5                  // Height at which the probe retracts
+  //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2)  // For a magnet on the right side of the bed
+#endif
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE