Corrections for preheat extension in language.h

Marlin/language.h

@@ -261,7 +261,6 @@
 
 #if LANGUAGE_CHOICE == 2
 
-
 // LCD Menu Messages
 // Please note these are limited to 17 characters!
 
@@ -277,16 +276,16 @@
 	#define MSG_PREHEAT_PLA0 "Rozgrzej PLA 1"
 	#define MSG_PREHEAT_PLA1 "Rozgrzej PLA 2"
 	#define MSG_PREHEAT_PLA2 "Rozgrzej PLA 3"
-	#define MSG_PREHEAT_PLA012 "Rozgrzej PLA Wszystko"
+	#define MSG_PREHEAT_PLA012 "Roz. PLA Wszystko"
 	#define MSG_PREHEAT_PLA_BEDONLY "Rozgrzej PLA Loze"
-	#define MSG_PREHEAT_PLA_SETTINGS "Ustawienia roz. PLA"
+	#define MSG_PREHEAT_PLA_SETTINGS "Ustaw. rozg. PLA"
 	#define MSG_PREHEAT_ABS "Rozgrzej ABS"
 	#define MSG_PREHEAT_ABS0 "Rozgrzej ABS 1"
 	#define MSG_PREHEAT_ABS1 "Rozgrzej ABS 2"
 	#define MSG_PREHEAT_ABS2 "Rozgrzej ABS 3"
-	#define MSG_PREHEAT_ABS012 "Rozgrzej ABS Wszystko"
+	#define MSG_PREHEAT_ABS012 "Roz. ABS Wszystko"
 	#define MSG_PREHEAT_ABS_BEDONLY "Rozgrzej ABS Loze"
-	#define MSG_PREHEAT_ABS_SETTINGS "Ustawienia roz. ABS"
+	#define MSG_PREHEAT_ABS_SETTINGS "Ustaw. rozg. ABS"
 	#define MSG_COOLDOWN "Chlodzenie"
 	#define MSG_SWITCH_PS_ON "Wlacz zasilacz"
 	#define MSG_SWITCH_PS_OFF "Wylacz zasilacz"
@@ -473,19 +472,19 @@
 	#define MSG_AUTO_HOME "Home auto."
 	#define MSG_SET_ORIGIN "Regler origine"
 	#define MSG_PREHEAT_PLA " Prechauffage PLA"
-	#define MSG_PREHEAT_PLA0 "Prechauffage PLA 1"
-	#define MSG_PREHEAT_PLA1 "Prechauffage PLA 2"
-	#define MSG_PREHEAT_PLA2 "Prechauffage PLA 3"
-	#define MSG_PREHEAT_PLA012 "Prechauffage PLA Tout"
-	#define MSG_PREHEAT_PLA_BEDONLY "Prechauffage PLA Plateau"
-	#define MSG_PREHEAT_PLA_SETTINGS " Regl. prechauffe PLA"
+	#define MSG_PREHEAT_PLA0 "Prechauff. PLA 1"
+        #define MSG_PREHEAT_PLA1 "Prechauff. PLA 2"
+	#define MSG_PREHEAT_PLA2 "Prechauff. PLA 3"
+	#define MSG_PREHEAT_PLA012 "Prech. PLA Tout"
+	#define MSG_PREHEAT_PLA_BEDONLY "Prech. PLA Plateau"
+	#define MSG_PREHEAT_PLA_SETTINGS "Regl. prech. PLA"
 	#define MSG_PREHEAT_ABS "Prechauffage ABS"
-	#define MSG_PREHEAT_ABS0 "Prechauffage ABS 1"
-	#define MSG_PREHEAT_ABS1 "Prechauffage ABS 2"
-	#define MSG_PREHEAT_ABS2 "Prechauffage ABS 3"
-	#define MSG_PREHEAT_ABS012 "Prechauffage ABS Tout"
-	#define MSG_PREHEAT_ABS_BEDONLY "Prechauffage ABS Plateau"
-	#define MSG_PREHEAT_ABS_SETTINGS "Regl. prechauffe ABS"
+	#define MSG_PREHEAT_ABS0 "Prechauff. ABS 1"
+	#define MSG_PREHEAT_ABS1 "Prechauff. ABS 2"
+	#define MSG_PREHEAT_ABS2 "Prechauff. ABS 3"
+	#define MSG_PREHEAT_ABS012 "Prech. ABS Tout"
+	#define MSG_PREHEAT_ABS_BEDONLY "Prech. ABS Plateau"
+	#define MSG_PREHEAT_ABS_SETTINGS "Regl. prech. ABS"
 	#define MSG_COOLDOWN "Refroidir"
 	#define MSG_SWITCH_PS_ON "Allumer alim."
 	#define MSG_SWITCH_PS_OFF "Eteindre alim."
@@ -676,16 +675,16 @@
 	#define MSG_PREHEAT_PLA0     "Vorwärmen PLA 1"
 	#define MSG_PREHEAT_PLA1     "Vorwärmen PLA 2"
 	#define MSG_PREHEAT_PLA2     "Vorwärmen PLA 3"
-	#define MSG_PREHEAT_PLA012   "Vorwärmen PLA Alle"
-	#define MSG_PREHEAT_PLA_BEDONLY "Vorwärmen PLA Bett"
-	#define MSG_PREHEAT_PLA_SETTINGS "Vorwärmen PLA Einstellungen"
+	#define MSG_PREHEAT_PLA012   "Vorw. PLA Alle"
+	#define MSG_PREHEAT_PLA_BEDONLY "Vorw. PLA Bett"
+	#define MSG_PREHEAT_PLA_SETTINGS "Vorwärm. PLA Ein."
 	#define MSG_PREHEAT_ABS      "Vorwärmen ABS"
 	#define MSG_PREHEAT_ABS0     "Vorwärmen ABS 1"
 	#define MSG_PREHEAT_ABS1     "Vorwärmen ABS 2"
 	#define MSG_PREHEAT_ABS2     "Vorwärmen ABS 3"
-	#define MSG_PREHEAT_ABS012   "Vorwärmen ABS Alle"
-	#define MSG_PREHEAT_ABS_BEDONLY "Vorwärmen ABS Bett"
-	#define MSG_PREHEAT_ABS_SETTINGS "Vorwärmen ABS Einstellungen"
+	#define MSG_PREHEAT_ABS012   "Vorw. ABS Alle"
+	#define MSG_PREHEAT_ABS_BEDONLY "Vorw. ABS Bett"
+	#define MSG_PREHEAT_ABS_SETTINGS "Vorwärm. ABS Ein."
 	#define MSG_COOLDOWN         "Abkühlen"
 	#define MSG_SWITCH_PS_ON     "Switch Power On"
 	#define MSG_SWITCH_PS_OFF    "Switch Power Off"
@@ -875,15 +874,15 @@
 	#define MSG_PREHEAT_PLA0 "Precalentar PLA 1"
 	#define MSG_PREHEAT_PLA1 "Precalentar PLA 2"
 	#define MSG_PREHEAT_PLA2 "Precalentar PLA 3"
-	#define MSG_PREHEAT_PLA012 "Precalentar PLA Todo"
-	#define MSG_PREHEAT_PLA_BEDONLY "Precalentar PLA Base"
+	#define MSG_PREHEAT_PLA012 "Precal. PLA Todo"
+	#define MSG_PREHEAT_PLA_BEDONLY "Precal. PLA Base"
 	#define MSG_PREHEAT_PLA_SETTINGS "Ajustar temp. PLA"
 	#define MSG_PREHEAT_ABS "Precalentar ABS"
 	#define MSG_PREHEAT_ABS0 "Precalentar ABS 1"
 	#define MSG_PREHEAT_ABS1 "Precalentar ABS 2"
 	#define MSG_PREHEAT_ABS2 "Precalentar ABS 3"
-	#define MSG_PREHEAT_ABS012 "Precalentar ABS Todo"
-	#define MSG_PREHEAT_ABS_BEDONLY "Precalentar ABS Base"
+	#define MSG_PREHEAT_ABS012 "Precal. ABS Todo"
+	#define MSG_PREHEAT_ABS_BEDONLY "Precal. ABS Base"
 	#define MSG_PREHEAT_ABS_SETTINGS "Ajustar temp. ABS"
 	#define MSG_COOLDOWN "Enfriar"
 	#define MSG_SWITCH_PS_ON "Switch Power On"
@@ -1079,15 +1078,15 @@
 	#define MSG_PREHEAT_PLA0					"Преднагрев PLA0"
 	#define MSG_PREHEAT_PLA1					"Преднагрев PLA1"
 	#define MSG_PREHEAT_PLA2					"Преднагрев PLA2"
-	#define MSG_PREHEAT_PLA012 					"Преднагрев PLA все "
-	#define MSG_PREHEAT_PLA_BEDONLY 			"Преднагрев PLA  \002 Кровать"
+	#define MSG_PREHEAT_PLA012 					"Преднаг. PLA все"
+	#define MSG_PREHEAT_PLA_BEDONLY 			"Пред. PLA Кровать"
 	#define MSG_PREHEAT_PLA_SETTINGS  			"Настройки PLA"
 	#define MSG_PREHEAT_ABS						"Преднагрев ABS"
 	#define MSG_PREHEAT_ABS0					"Преднагрев ABS0"
 	#define MSG_PREHEAT_ABS1					"Преднагрев ABS1"
 	#define MSG_PREHEAT_ABS2					"Преднагрев ABS2"
-	#define MSG_PREHEAT_ABS012 					"Преднагрев ABS все "
-	#define MSG_PREHEAT_ABS_BEDONLY 			"Преднагрев ABS  \002 Кровать"
+	#define MSG_PREHEAT_ABS012 					"Преднаг. ABS все "
+	#define MSG_PREHEAT_ABS_BEDONLY 			"Пред. ABS Кровать"
 	#define MSG_PREHEAT_ABS_SETTINGS  			"Настройки ABS"
 	#define MSG_COOLDOWN						"Охлаждение"
 	#define MSG_SWITCH_PS_ON					"Switch Power On"
@@ -1274,15 +1273,15 @@
 	#define MSG_PREHEAT_PLA0         "Preriscalda PLA 1"
 	#define MSG_PREHEAT_PLA1         "Preriscalda PLA 2"
 	#define MSG_PREHEAT_PLA2         "Preriscalda PLA 3"
-	#define MSG_PREHEAT_PLA012       "Preriscalda PLA Tutto"
-	#define MSG_PREHEAT_PLA_BEDONLY  "Preriscalda PLA Piatto"
+	#define MSG_PREHEAT_PLA012       "Preris. PLA Tutto"
+	#define MSG_PREHEAT_PLA_BEDONLY  "Preri. PLA Piatto"
 	#define MSG_PREHEAT_PLA_SETTINGS "Preris. PLA Conf"
 	#define MSG_PREHEAT_ABS          "Preriscalda ABS"
 	#define MSG_PREHEAT_ABS0         "Preriscalda ABS 1"
 	#define MSG_PREHEAT_ABS1         "Preriscalda ABS 2"
 	#define MSG_PREHEAT_ABS2         "Preriscalda ABS 3"
-	#define MSG_PREHEAT_ABS012       "Preriscalda ABS Tutto"
-	#define MSG_PREHEAT_ABS_BEDONLY  "Preriscalda ABS Piatto"
+	#define MSG_PREHEAT_ABS012       "Preris. ABS Tutto"
+	#define MSG_PREHEAT_ABS_BEDONLY  "Preri. ABS Piatto"
 	#define MSG_PREHEAT_ABS_SETTINGS "Preris. ABS Conf"
 	#define MSG_COOLDOWN             "Raffredda"
 	#define MSG_SWITCH_PS_ON         "Switch Power On"
@@ -1471,15 +1470,15 @@
 	#define MSG_PREHEAT_PLA0 " pre-aquecer PLA 1"
 	#define MSG_PREHEAT_PLA1 " pre-aquecer PLA 2"
 	#define MSG_PREHEAT_PLA2 " pre-aquecer PLA 3"
-	#define MSG_PREHEAT_PLA012 " pre-aquecer PLA Tudo"
-	#define MSG_PREHEAT_PLA_BEDONLY  " pre-aquecer PLA \002Base"
+	#define MSG_PREHEAT_PLA012 " pre-aq. PLA Tudo"
+	#define MSG_PREHEAT_PLA_BEDONLY  " pre-aq. PLA \002Base"
 	#define MSG_PREHEAT_PLA_SETTINGS "PLA setting"
 	#define MSG_PREHEAT_ABS "Pre-aquecer ABS"
 	#define MSG_PREHEAT_ABS0 " pre-aquecer ABS 1"
 	#define MSG_PREHEAT_ABS1 " pre-aquecer ABS 2"
 	#define MSG_PREHEAT_ABS2 " pre-aquecer ABS 3"
-	#define MSG_PREHEAT_ABS012 " pre-aquecer ABS Tudo"
-	#define MSG_PREHEAT_ABS_BEDONLY  " pre-aquecer ABS \002Base"
+	#define MSG_PREHEAT_ABS012 " pre-aq. ABS Tudo"
+	#define MSG_PREHEAT_ABS_BEDONLY  " pre-aq. ABS \002Base"
 	#define MSG_PREHEAT_ABS_SETTINGS "ABS setting"
 	#define MSG_COOLDOWN "Esfriar"
 	#define MSG_SWITCH_PS_ON "Switch Power On"
@@ -1675,15 +1674,15 @@
 	#define MSG_PREHEAT_PLA0 "Esilammita PLA 1"
 	#define MSG_PREHEAT_PLA1 "Esilammita PLA 2"
 	#define MSG_PREHEAT_PLA2 "Esilammita PLA 3"
-	#define MSG_PREHEAT_PLA012 "Esilammita PLA Kaikki"
-	#define MSG_PREHEAT_PLA_BEDONLY  "Esilammita PLA Alusta"
+	#define MSG_PREHEAT_PLA012 "Esila. PLA Kaikki"
+	#define MSG_PREHEAT_PLA_BEDONLY  "Esila. PLA Alusta"
 	#define MSG_PREHEAT_PLA_SETTINGS "Esilamm. PLA konf"
 	#define MSG_PREHEAT_ABS "Esilammita ABS"
 	#define MSG_PREHEAT_ABS0 "Esilammita ABS 1"
 	#define MSG_PREHEAT_ABS1 "Esilammita ABS 2"
 	#define MSG_PREHEAT_ABS2 "Esilammita ABS 3"
-	#define MSG_PREHEAT_ABS012 "Esilammita ABS Kaikki"
-	#define MSG_PREHEAT_ABS_BEDONLY  "Esilammita ABS Alusta"
+	#define MSG_PREHEAT_ABS012 "Esila. ABS Kaikki"
+	#define MSG_PREHEAT_ABS_BEDONLY  "Esila. ABS Alusta"
 	#define MSG_PREHEAT_ABS_SETTINGS "Esilamm. ABS konf"
 	#define MSG_COOLDOWN "Jaahdyta"
 	#define MSG_SWITCH_PS_ON "Virta paalle"
@@ -2105,6 +2104,9 @@
 	#define MSG_BED "Bed"
 	#define MSG_FAN_SPEED "Fan snelheid"
 	#define MSG_FLOW "Flow"
+	#define MSG_FLOW0 "Flow 0"
+	#define MSG_FLOW1 "Flow 1"
+	#define MSG_FLOW2 "Flow 2"
 	#define MSG_CONTROL "Control"
 	#define MSG_MIN " \002 Min"
 	#define MSG_MAX " \002 Max"
@@ -2197,6 +2199,7 @@
 	#define MSG_M105_INVALID_EXTRUDER "M105 Ongeldige extruder "
 	#define MSG_M200_INVALID_EXTRUDER "M200 Ongeldige extruder "
 	#define MSG_M218_INVALID_EXTRUDER "M218 Ongeldige extruder "
+	#define MSG_M221_INVALID_EXTRUDER "M221 Ongeldige extruder "
 	#define MSG_ERR_NO_THERMISTORS "Geen thermistors - geen temperatuur"
 	#define MSG_M109_INVALID_EXTRUDER "M109 Ongeldige extruder "
 	#define MSG_HEATING "Opwarmen..."