Whitespace cleanup

Marlin/Configuration_adv.h

 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H

Marlin/Marlin_main.cpp

       ny -= (Y_PROBE_OFFSET_FROM_EXTRUDER);
     }
     else if (!position_is_reachable(nx, ny)) return NAN;        // The given position is in terms of the nozzle
-  
-    const float nz = 
+
+    const float nz =
       #if ENABLED(DELTA)
         // Move below clip height or xy move will be aborted by do_blocking_move_to
         min(current_position[Z_AXIS], delta_clip_start_height)
     #else
       prepare_move_to_destination();
     #endif
-	
+
     #if ENABLED(NANODLP_Z_SYNC)
       // If G0/G1 command include Z-axis, wait for move and output sync text.
       if (parser.seenval('Z')) {

Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h

 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H

Marlin/example_configurations/Anet/A6/Configuration_adv.h

 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H

Marlin/example_configurations/Anet/A8/Configuration_adv.h

 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H

Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h

 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H

Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h

 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H

Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h

 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H

Marlin/example_configurations/Cartesio/Configuration_adv.h

 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H

Marlin/example_configurations/Creality/CR-10/Configuration_adv.h

 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H

Marlin/example_configurations/Felix/Configuration_adv.h

 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H

Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h

 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H

Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h

 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H

Marlin/example_configurations/Malyan/M150/Configuration_adv.h

 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H

Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h

 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H

Marlin/example_configurations/RigidBot/Configuration_adv.h

 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H

Marlin/example_configurations/SCARA/Configuration_adv.h

 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H

Marlin/example_configurations/Sanguinololu/Configuration_adv.h

 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H

Marlin/example_configurations/TinyBoy2/Configuration_adv.h

 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H

Marlin/example_configurations/Velleman/K8200/Configuration_adv.h

 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H

Marlin/example_configurations/Velleman/K8400/Configuration_adv.h

 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H

Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h

 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H

Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h

 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H

Marlin/example_configurations/delta/generic/Configuration_adv.h

 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H

Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h

 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H

Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h

 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H

Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h

 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H

Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h

 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H

Marlin/example_configurations/makibox/Configuration_adv.h

 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H

Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h

 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H

Marlin/example_configurations/wt150/Configuration_adv.h

 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H