marlin

Commit Graph

Tekijä	SHA1	Viesti	Päivämäärä
daid303	a27fef8750	Store the pre-heat constants outside of the ULTIPANEL define, so we can use them when storing EEPROM in a build without the ULTIPANEL.	12 vuotta sitten
daid303	789be03b4f	Update on makefile, should make it easier to compile for different boards without changing the makefile. (Still missing Arduino 1.x.x support).	12 vuotta sitten
daid303	40ce057a3e	Fixing issue #297	12 vuotta sitten
daid303	625ac81acc	Yes, makes sense, lets NOT use the value directly from the configuration define but modify it before setting it. This will not confuse people (including me) at all!	12 vuotta sitten
daid303	ffc69537aa	Update on some comments, make the MOTHERBOARD list complete again.	12 vuotta sitten
daid303	71efcfc648	Most likely fixing issue #295.	12 vuotta sitten
daid303	04be9d6001	God damn. Sorry, my mistake, forgot to add this file.	12 vuotta sitten
daid303	c17da4b707	Add ConfigurationStore to the Makefile.	12 vuotta sitten
Jonathan Bastien-Filiatrault	46b9988e26	Search and replace failure.	12 vuotta sitten
Jonathan Bastien-Filiatrault	0f73afb0b0	Avoid defining overriding definitions for the RepRapDiscount Smart Controller. Remove common definitions. Harmonize declaration order.	12 vuotta sitten
Jonathan Bastien-Filiatrault	36b452c7ac	Remove abbrs.	12 vuotta sitten
YanFM	332344bd43	Update Marlin/language.h Included Portuguese language	12 vuotta sitten
daid303	e6c1cadea0	Set the watchdog to a 4 second timeout, as with 1 second it can timeout during SD card init.	12 vuotta sitten
daid303	12a4d60e18	Fix the EEPROM storage, no longer inline it at multiple locations, and remove the template.	12 vuotta sitten
Jonathan Bastien-Filiatrault	9606f4d04f	Include Marlin_main.cpp in source files.	12 vuotta sitten
Jonathan Bastien-Filiatrault	3cbaad9288	RepRapDiscount Smart Controller pin definitions.	12 vuotta sitten
Robert F-C	99692dc99e	Clean up special serial port cases Assume SERIAL_PORT 0 if not defined. Collapse un-numbered register special case. Clarify comments.	12 vuotta sitten
daid303	5a998558a9	Update suggested by Robert F-C. #289	12 vuotta sitten
daid303	f6ff0ab767	signed/unsigned fixes.	12 vuotta sitten
daid303	5d471e0f34	Also reset the PID values to defaults. Fixes #281	12 vuotta sitten
daid303	d3ebc34958	Hopefully also support chips with a single UART in MarlinSerial now.	12 vuotta sitten
daid303	b6ff45254e	Better explain the watchdog "problem" and rename the config define so it explains that the feature belongs to the watchdog.	12 vuotta sitten
daid303	7e348fcb5f	By mistake enabled the watchdog by default. This should be off by default.	12 vuotta sitten
daid303	06b58a9c4f	First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions.	12 vuotta sitten
Robert F-C	65c9a0728f	Set default serial port back to 0.	12 vuotta sitten
Robert F-C	ab9d183024	Make serial port configurable. This change makes the choice of serial port configurable so that wireless capability can be easily added by connecting Bluetooth modules (such as BlueSmirf or JY-MCU) to the expansion port pins.	12 vuotta sitten
Bracken Dawson	f5631a89e8	Add dummy Emergancy Pin to Gen7 1.4 Change required after pulling from ErikZalm.	12 vuotta sitten
Bracken Dawson	2873d67b17	Put bogus temp override back in Gen7 up to 1.3 Took out the ifdef when I split 1.4 out and forgot to permanently define it for <=1.3.	12 vuotta sitten
MaikStohn	6ed02c86be	Fixed wrong code (will not even compile when EXTRUDERS>2)	12 vuotta sitten
Sergey Taranenko	2a67363e27	Fix ‘prog_uchar’ definition in LiquidCrystalRus.cpp	12 vuotta sitten
Erik vd Zalm	58bca87c72	fix LCD temp bed artifacts on power up ' B022/0.) -> B022/000 '	12 vuotta sitten
Erik vd Zalm	febeb43197	Revert "fix LCD temp bed artifacts on power up ' B022/0.) -> B022/000 '" This reverts commit cb02c2f9d8.	12 vuotta sitten
Sergey Taranenko	8178dec4c3	Fix num of digits on LCD for E and Z axis. The number of steps per mm often contains 4 digits before the decimal point and does not require precision greater than 0.1	13 vuotta sitten
Daniele Sdei	695938ba3f	Italian language support	13 vuotta sitten
Sergey Taranenko	cb02c2f9d8	fix LCD temp bed artifacts on power up ' B022/0.) -> B022/000 '	13 vuotta sitten
Jonathan Bastien-Filiatrault	e4a5e333ef	Generalize.	13 vuotta sitten
Jonathan Bastien-Filiatrault	e10d3136c8	Create an explicit rule for building applet/Marlin.cpp. It would seem that the pattern matches do not work when the source file is created when make is running. The result of this is that it is necessary to run "make" twice to build the firmware. This adds an explicit rule without a pattern match for building applet/Marlin.cpp it corrects the make behaviour at the cost of adding a little redundancy in the Makefile.	13 vuotta sitten
brupje	326423719f	Add support for Megatronics	13 vuotta sitten
brupje	d07b6e93d5	Add support for Megatronics	13 vuotta sitten
Sergey Taranenko	efcc28d347	Fix check for include LiquidCrystalRus.h	13 vuotta sitten
Sergey Taranenko	cfc193cdac	Enables support the Cyrillic alphabet for LCD	13 vuotta sitten
Sergey Taranenko	24bcc9647d	Added Russian translation	13 vuotta sitten
Mark Finn	bf7e453d02	Unwanted artifacts from unclean merge of bed-pid tree	13 vuotta sitten
elgambitero	df09e2adce	Spanish updated	13 vuotta sitten
elgambitero	ddf6603d81	Spanish language updated. Bug fixes on dialogs.	13 vuotta sitten
drakelive	be1e099f1b	Union whit Erick version	13 vuotta sitten
elgambitero	7afd202b89	New dialogs translated to spanish. Bug fixes. Dialogs from M119 translated, and "Set Preheat" dialogs adapted to the screen size.	13 vuotta sitten
elgambitero	ebc4601185	Some new dialogs translated to Spanish	13 vuotta sitten
drakelive	ca7ca4572e	primo commit	13 vuotta sitten
johnnyr	8016f058bc	fix max endstop pins	13 vuotta sitten

Ensimmäinen Edellinen ... 46 47 48 49 50 Seuraava Viimeisin

2458 Commitit (01bedd17c9d03e82dbd3c24d8e462b010a54ba90)