marlin

Commit graph

Autor	SHA1	Nachricht	Datum
Ryan	052d102ded	UltiMachine Archim 1 support (#12404)	vor 6 Jahren
Scott Lahteine	9da6809ac3	Adjust some comment spacing	vor 6 Jahren
Scott Lahteine	5182eaf661	Fix endstops enable behavior during probing Fix a bug introduced in #9582	vor 6 Jahren
Scott Lahteine	e0956bb572	Drop 'register' storage specifier	vor 6 Jahren
Scott Lahteine	6e3caf23b6	IS_DELTA => ENABLED(DELTA)	vor 6 Jahren
TheLongAndOnly	5536228359	G34 Auto-align multi-stepper Z axis (#11302)	vor 6 Jahren
InsanityAutomation	aebbb2359d	Fix IDEX homing X0 wrong direction (#12200)	vor 6 Jahren
forkoz	3a3ab3391f	Return set_directions() to stepper.cpp (#12182) Initial manual Z move can be negative if your stepper is inverted. Leads to bad situations for crashed or initially booted printers.	vor 6 Jahren
AnHardt	d82bcdeea1	Make PULSE_STOP(E) conditional (#12121)	vor 6 Jahren
Chris Pepper	c90e26dfa6	fix normal extruder stepping (#12118)	vor 6 Jahren
Marcio Teixeira	056561df93	[2.0.x] Enhancements to FILAMENT_RUNOUT_SENSOR (#12069) - Added FILAMENT_RUNOUT_DISTANCE_MM option - Added FILAMENT_MOTION_SENSOR option	vor 6 Jahren
AnHardt	f56968ba0b	New Continuous Filament Mixer (#12098)	vor 6 Jahren
Scott Lahteine	ddaef1a60c	Clean trailing whitespace	vor 6 Jahren
Scott Lahteine	45e738876a	Add stepper MS3 support Co-Authored-By: TheLongAndOnly <thelongandonly@users.noreply.github.com>	vor 6 Jahren
Scott Lahteine	d556dc1865	Fix and improve EEPROM storage (#12054) * Clean up Temperature PID * Improve EEPROM read/write/validate * Group `SINGLENOZZLE` saved settings * Group planner saved settings * Group filament change saved settings * Group skew saved settings * Group `FWRETRACT` saved settings	vor 6 Jahren
Roxy-3D	0780913848	IDEX Improvements (#11848)	vor 6 Jahren
Scott Lahteine	1718eff54a	Code changes supporting up to 6 extruders	vor 6 Jahren
Holger Müller	1a6f2b29b8	Add support for Triple-Z steppers/endstops	vor 7 Jahren
Scott Lahteine	d882717d98	Save some PROGMEM with constexpr (#11798) When possible, make `active_extruder` a `constexpr` to save some PROGMEM.	vor 6 Jahren
Sebastianv650	7e8c073fba	Fix extruder stops extruding with LA (#11758)	vor 6 Jahren
Scott Lahteine	d1ceaf5550	[2.0.x] Followup to IDEX changes (#11707)	vor 6 Jahren
Roxy-3D	7680b64aa6	IDEX clean up (#11690)	vor 6 Jahren
Dave Johnson	c64199941e	Compile only selected PIO environment (#11519)	vor 6 Jahren
Giuliano	e85feb2545	[2.0.x] Better timing handling (#11461)	vor 6 Jahren
Scott Lahteine	aa4cd2e861	Eliminate stepper.* signed/unsigned warnings	vor 7 Jahren
Eduardo José Tagle	edb21f349a	Fix stepper/planner block handling, race conditions (#11098) - Allow planner to alter the deceleration phase of the currently executing block. - Remove BUSY flag, as it is NON ATOMIC to set bits in the Stepper ISR and Planner at the same time.	vor 7 Jahren
etagle	5b49fccf80	Add stepper driver DIR delay configuration option ...and recommended pulse width configuration for A4988	vor 7 Jahren
Scott Lahteine	99591dc20c	Filter endstops state at all times (#11066)	vor 7 Jahren
etagle	a215725df6	Fix stepper pulse timing Always honor minimum period on stepper pulse generation, and fix timing calculations Signed-off-by: etagle <ejtagle@hotmail.com>	vor 7 Jahren
Scott Lahteine	0d79128c8d	Localize stepper-specific defines	vor 7 Jahren
Scott Lahteine	4dbec774b5	HAL__TIMER_RATE => _TIMER_RATE	vor 7 Jahren
etagle	6f14bcaa3e	Add MAXIMUM_STEPPER_RATE, enforce in multi-stepping The timing value should be properly set for ALL boards. The compiler will check and set maximum step rate calculations based on those values.	vor 7 Jahren
etagle	39a7e7720d	Adaptive multiaxis step smoothing - Stepper bugs fixed - Support MIXING_EXTRUDER with Linear Advance - Miscellaneous cleanup	vor 7 Jahren
Scott Lahteine	3701869e6c	Add HAL_timer_start for AVR, use stepper timer to time pulses	vor 7 Jahren
Scott Lahteine	ad8d3150aa	Cleanup for dual endstops homing	vor 7 Jahren
Eduardo José Tagle	d3c02410a8	[2.0.x] Small assorted collection of fixes and improvements (#10911) * Misc fixes and improvements - Get rid of most critical sections on the Serial port drivers for AVR and DUE. Proper usage of FIFOs should allow interrupts to stay enabled without harm to queuing and dequeuing. Also, with 8-bit indices (for AVR) and up to 32-bit indices (for ARM), there is no need to protect reads and writes to those indices. - Simplify the XON/XOFF logic quite a bit. Much cleaner now (both for AVR and ARM) - Prevent a race condition (edge case) that could happen when estimating the proper value for the stepper timer (by reading it) and writing the calculated value for the time to the next ISR by disabling interrupts in those critical and small sections of the code - The problem could lead to lost steps. - Fix dual endstops not properly homing bug (maybe). * Set position immediately when possible	vor 7 Jahren
Scott Lahteine	4299e5dc8b	Modify E-stepping macros for use in LINEAR_ADVANCE (#10885)	vor 7 Jahren
Scott Lahteine	0ca9db7051	Correct HOTENDS for SWITCHING_EXTRUDER	vor 7 Jahren
Eduardo José Tagle	7b9f0302d4	Fix Bresenham rounding errors, add link to article (#10871)	vor 7 Jahren
Scott Lahteine	2566342979	Adjust some commentary	vor 7 Jahren
Scott Lahteine	6775a16c97	Fix switching extruder stepping with LA	vor 7 Jahren
Scott Lahteine	aaaf09bda2	BEZIER_JERK_CONTROL => S_CURVE_ACCELERATION	vor 7 Jahren
Scott Lahteine	01d37e00af	Fix up stepper ISR with linear advance timing (#10853) Co-Authored-By: ejtagle <ejtagle@hotmail.com>	vor 7 Jahren
Scott Lahteine	7261f48872	Fix reset of endstops and move state	vor 7 Jahren
Scott Lahteine	50fa8e01c1	Minor optimization of axis_did_move bits	vor 7 Jahren
Scott Lahteine	f28e366b77	Followup for core endstops	vor 7 Jahren
Scott Lahteine	9644d56b42	Patches for core motion tests	vor 7 Jahren
Scott Lahteine	3e3789da85	Regression: Endstops Core compatibility (#10823) Co-Authored-By: ejtagle <ejtagle@hotmail.com>	vor 7 Jahren
Scott Lahteine	4b2f6e3b2b	[2.0.x] Add endstop noise filter (#10796)	vor 7 Jahren
Scott Lahteine	435ecb6b67	Followup to stepper/planner refactor	vor 7 Jahren

Erste Vorherige 1 2 3 Nächste Letzte

126 Commits (052d102ded293e7ad96739c7ba1b0662fc64388f)