marlin

Commit Graph

Yazar	SHA1	Mesaj	Tarih
Scott Lahteine	b2cf253a13	Add RESTORE_LEVELING_AFTER_G28 option	7 yıl önce
Scott Lahteine	7d8c6b3f3c	Add 20x4 option for Sainsmart LCD (#9740)	7 yıl önce
Marcio Teixeira	aada1e698f	Removed unused configuration options.	7 yıl önce
Scott Lahteine	8733d5a296	Add NUM_RUNOUT_SENSORS to example configs	7 yıl önce
Scott Lahteine	ca55f2927a	Pulldown pin mode support (#9701) Implemented for LPC1768.	7 yıl önce
Scott Lahteine	79272f98fc	Proposed changes to ST7920 lightweight status screen	7 yıl önce
Marcio Teixeira	24eb275b99	Added a light-weight status screen for the ST7920 - The status screen uses the ST7920 character generator to greatly reduce SPI traffic and MCU load when updating the status screen. - Has been tested with the RepRapDiscount Full Graphics Smart Controller but should work with any LCD that uses an ST7920 or fully compatible controller.	7 yıl önce
Roxy-3D	21e60fd3ed	Allow user to control Z-Height correction for off mesh movements (#9661)	7 yıl önce
Marcio Teixeira	4880ac6533	Added a light-weight status screen for the ST7920 - The status screen uses the ST7920 character generator to greatly reduce SPI traffic and MCU load when updating the status screen. - Has been tested with the RepRapDiscount Full Graphics Smart Controller but should work with any LCD that uses an ST7920 or fully compatible controller.	7 yıl önce
Scott Lahteine	2ec65051fd	Fix serial comment sp.	7 yıl önce
Scott Lahteine	38c7d53bf7	Repair some spacing	7 yıl önce
Scott Lahteine	2014d38e10	NEOPIXEL_BRIGHTNESS parity	7 yıl önce
Scott Lahteine	b5e92f4f90	[2.0.x] Enable / disable PSU automatically (#9503)	7 yıl önce
Scott Lahteine	eecb0188c0	Add ULTI_CONTROLLER to example configs	7 yıl önce
Scott Lahteine	4925f60cff	Add MALYAN_LCD to configs	7 yıl önce
Scott Lahteine	7d6c009104	Add thermistor 15 tuned for JGAurora A5	7 yıl önce
Scott Lahteine	348b454401	Probe bounds based on bed size	7 yıl önce
Scott Lahteine	58ed9901d7	Consistent NEOPIXEL_TYPE options	7 yıl önce
Scott Lahteine	fa432508b0	Followup to Ender config	7 yıl önce
Scott Lahteine	048486390e	Bring some configs up to date	7 yıl önce
Thomas Moore	dabb75034c	Update example configurations	7 yıl önce
GMagician	5295b4713d	[2.0.x] add semitec 104NT-4 (#9119) Table is very very similar to old 104-GT2 so I added only the name and recycled old ID	7 yıl önce
Scott Lahteine	0b4a46fa6c	Bring configs up to date with 1.1.x	7 yıl önce
Thomas Moore	f0a8a1a853	[2.0.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE (#8866) * Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE	7 yıl önce
Scott Lahteine	28fc8741d6	Reduce default jerk. XY by half. Z by 1/4	7 yıl önce
Scott Lahteine	1cf1cf8759	Add RADDS_DISPLAY to example configs	7 yıl önce
Scott Lahteine	f79026acc1	Apply MKS_12864OLED_SSD1306 to examples Followup to #8814	7 yıl önce
Scott Lahteine	9abbcc3ee0	Apply ZONESTAR_LCD to example configs	7 yıl önce
Scott Lahteine	69d49a2438	Shorter segments may be better	7 yıl önce
Scott Lahteine	d7800e7975	Apply MULTIPLE_PROBING to example configs	7 yıl önce
Richard Wackerbarth	c1184552ac	Change K1 to required option PID_K1	7 yıl önce
Scott Lahteine	aa7efb96bf	Bring configurations up to date	7 yıl önce
Scott Lahteine	082ab8fcab	Add SKEW_CORRECTION to example configs	7 yıl önce
Scott Lahteine	7c61bcb058	Apply SEGMENT_LEVELED_MOVES to example configs	7 yıl önce
Scott Lahteine	5926c9c97b	Followup for MESH_EDIT_GFX_OVERLAY	7 yıl önce
Scott Lahteine	5ce7f23afa	Config option G26_MESH_VALIDATION for all meshes	7 yıl önce
Scott Lahteine	3f0a982b8c	Move Filament Width Sensor to Configuration_adv.h	7 yıl önce
Scott Lahteine	b76e173205	Move test extrusion options under G26	7 yıl önce
Scott Lahteine	81b91b3f9d	Clean up some trailing white-space	7 yıl önce
Roxy-3D	967104e1ce	Default Extrusion Settings were off a few lines in some of the example config files. (#8333)	7 yıl önce
Roxy-3D	ed62c621d7	Fix G26 Circle Drawing. Add Default Extrusion Settings (#8313) - Fix G26 Circle Drawing. - Add default extrusion settings so machine can print lines on print bed - Yet to be done: Get LCD Menu's to use these settings.	7 yıl önce
Scott Lahteine	2c099fd4c2	Update Thermal Protection Documentation	7 yıl önce
Scott Lahteine	93ba72ea83	Add SERIAL_PORT -1, set on SBASE, STM32F103RET6	7 yıl önce
Scott Lahteine	7e43dd1d23	Fix probes configuration url Based on #8241 by @machaj	7 yıl önce
android444	9cc1d8e312	[2.0.x] Support for SilverGate Board	7 yıl önce
Scott Lahteine	34be5d33c0	The plural of 'axis' is 'axes'	7 yıl önce
Scott Lahteine	7fad26549b	Concise SD_REPRINT_LAST_SELECTED_FILE description	7 yıl önce
Scott Lahteine	46e9eae159	Tweak to M100 config comment	7 yıl önce
Scott Lahteine	7f55d82fd1	Move UBL_SAVE_ACTIVE_ON_M500 to Configuration.h	7 yıl önce
Scott Lahteine	580b6e9089	Apply physical limits to mesh bounds	7 yıl önce

İlk Önceki 1 2 Sonraki Son

62 İşlemeler (07d7e8aa1b676c40b8387d5c7211dedfc34e4c5f)