marlin

Commit-Graf

Upphovsman	SHA1	Meddelande	Datum
Scott Lahteine	7c72b57313	Unify manual feedrate and Fix LCD MANUAL_FEEDRATE (PR#128) As noted by @o-lampe at https://github.com/MarlinFirmware/MarlinDev/issues/114#issuecomment-136757614 the `MANUAL_FEEDRATE` for Delta Z should be the same as XY.	10 år sedan
Scott Lahteine	f690b82343	Remove extra MAX_FREQ_TIME define (PR#148)	10 år sedan
fmalpartida	868dbbac6a	Updated README to rearrange logo to avoid being crossed out by title. Added my name following naming convention.	10 år sedan
Richard Wackerbarth	8e4fa08a20	Merge Dual Y&Z towers (PR#108 & PR#147)	10 år sedan
Scott Lahteine	a4c78ae786	Add E1 pins to SENSITIVE_PINS for Dual Y or Dual Z	10 år sedan
Scott Lahteine	a39fadf876	Update kossel-pro example config (again?)	10 år sedan
Scott Lahteine	34e0a8d848	Move Y2 and Z2 pins defines to pins.h	10 år sedan
Scott Lahteine	28599c51c7	Wrap Dual Y options in a conditional	10 år sedan
Scott Lahteine	11a065c0ca	Remove Z2 pins overrides from Configuration_adv.h	10 år sedan
Scott Lahteine	f7f6b5faae	Fix lcd_move_e compile error (PR#143) Fix a compile error introduced in #98	10 år sedan
Richard Wackerbarth	fe0cbd40fe	Default to SD Card Disabled (PR#139)	10 år sedan
Scott Lahteine	2b30e8ac99	Conditionals for ULTIPANEL without SDSUPPORT	10 år sedan
Scott Lahteine	7c7a4051fe	Disable SDSUPPORT by default As noted in #133 you can’t disable `SDSUPPORT` with `MAKRPANEL`, `PANEL_ONE`, `MINIPANEL`, or `ULTIPANEL`. This patch makes it possible to disable `SDSUPPORT` on these controllers and then disables it by default. Users of these controllers will now need to enable `SDSUPPORT` in their configurations as others currently do.	10 år sedan
Eric Kuzmenko	b23d765991	Added Extrude From Multiple Extruders from LCD feature	10 år sedan
Scott Lahteine	fe8816214f	GPLv2 LICENSE	10 år sedan
fmalpartida	c3c4d50a99	Refreshed logo for release 1.1	10 år sedan
Christian Lefrançois	8347a9d6e4	Fix HOMING_BUMP_DIVISOR for deltas configuration * Re-bump speed divisor should be the same for delta printer.	10 år sedan
Scott Lahteine	703df2cb6c	Fix error message for probe region sanity check	10 år sedan
Shane Francis	4c8330c15c	Trim Adjustments for Delta Configurations	10 år sedan
Roxy-3DPrintBoard	93a512cf97	Add Roxy-3DPrintBoard to dev team	10 år sedan
Scott Lahteine	962120d1d2	Fix spacing in some conditional blocks	10 år sedan
Richard Wackerbarth	109628a77e	Merge tag debug_G29 (PR#54)	10 år sedan
Richard Wackerbarth	20b4772155	Create DEBUG_LEVELING_FEATURE	10 år sedan
Scott Lahteine	194f98ff95	Debug messages for homing and leveling	10 år sedan
Richard Wackerbarth	6292d9e815	Rename ENABLE_AUTO_BED_LEVELING With the introduction of the #if ENABLED(…) reads better than	10 år sedan
Richard Marko	91fd66ffba	add Lulzbot TAZ4 example configuration (PR#104)	10 år sedan
Wurstnase	7a275773ee	remove colon in utf_mapper.h (PR#106)	10 år sedan
Chris Bruner	6b4b6fa315	update for newest version of U8glib_Arduino	10 år sedan
Christian Lefrançois	9897a9147c	Update ABL comments (PR#95) * Updates the auto bed leveling comments ONLY. * Renames "Z probe" word usage in //comments and #errors properly.	10 år sedan
Christian Lefrançois	a7822e3ff7	Some renaming of Z_PROBE to Z_MIN_PROBE (PR#91) * Fix a couple of renames omission and macro expansion errors.	10 år sedan
Richard Wackerbarth	4939c642b4	Merge Suppress some compiler warnings (PR#70)	10 år sedan
Richard Wackerbarth	ad90e851b3	Use a small unsigned integer type	10 år sedan
Richard Wackerbarth	29b456ae07	Suppress some compiler warnings	10 år sedan
Scott Lahteine	23d742bf06	Don't free the stack array plane_equation_coefficients (PR#83)	10 år sedan
Scott Lahteine	e3b1e08777	Patch G30 to use raise_z_for_servo (PR#73)	10 år sedan
Richard Wackerbarth	c2f695c84e	Merge Save a few bytes (PR#79)	10 år sedan
Scott Lahteine	a1eb90d5c0	Save another 30 bytes in gcode_SET_Z_PROBE_OFFSET	10 år sedan
Scott Lahteine	91122277f4	Reduce gcode_SET_Z_PROBE_OFFSET by 88 bytes	10 år sedan
Richard Wackerbarth	9531b154ea	Merge Zig-Zag Endpoint (PR#65)	10 år sedan
AnHardt	5707a2c3d5	indexindexIntoAB is only vald for !DELTA	10 år sedan
AnHardt	d8860f9ad9	Alway end at the same point Always end at [RIGHT_PROBE_BED_POSITION, BACK_PROBE_BED_POSITION] Regardles the evennes of auto_bed_leveling_grid_points.	10 år sedan
AnHardt	4ca8f4a9a7	Always zigzag Use the shortest way between probing-points.	10 år sedan
AnHardt	3d23424121	Add array indexIntoAB[xx][yy] and use it.	10 år sedan
AnHardt	e2d69f66b2	Make Z_PROBE a Z_MIN_PROBE (PR#65) Currently we use the probe exclusively as a device to find the build platform(bed). For the currently supported setups this means, we use it as a additional min-endstop. A triggered when not deployed probe disturbs the homing process for max-endstops. Rename ENDSTOPPULLUP_ZPROBE to ENDSTOPPULLUP_ZMIN_PROBE Rename Z_PROBE_ENDSTOP_INVERTING to Z_MIN_PROBE_ENDSTOP_INVERTING Rename Z_PROBE_ENDSTOP to Z_MIN_PROBE_ENDSTOP Rename DISABLE_Z_PROBE_ENDSTOP to DISABLE_Z_MIN_PROBE_ENDSTOP Rename Z_PROBE_REPEATABILITY_TEST to Z_MIN_PROBE_REPEATABILITY_TEST Rename Z_PROBE_ENDSTOP to Z_MIN_PROBE_ENDSTOP Adjust comments accordingly Remove Z_MAX check for the probe in update_endstops(). Using an delta related idea of @clefranc from #61, extended to the general change for all setups. Tested with Prusa i3, max-z-endstop and permanently triggered z-probe. Worked for @clefranc's delta.	10 år sedan
AnHardt	8d23c4230e	Add a Travis test for Z_DUAL_STEPPER_DRIVERS and Z_DUAL_ENDSTOPS (PR#68)	10 år sedan
AnHardt	6a6e863a47	Resolve #2581 by adding a missed ';' (PR#67)	10 år sedan
RicardoGA	e09ff79635	Update pins_RAMPS_13.h (PR#64) Now all ramps configuration can enable Filament sensor not only EEB	10 år sedan
Fourmi	e6aed7bb4e	Update thermistortables for Hisens Thermistor (PR#2588)	10 år sedan
Richard Wackerbarth	9d8cc24abf	Continue from the line following the M999 (PR#60) If the printer is going to accept the M999, then it should continue from that line number.	10 år sedan
wurstnase	f3ab1dba54	Z babystepping for coreXY (PR#47) only X and Y were not implemented	10 år sedan