thomas
/
marlin
Suivre 1
Favoriser 0
Bifurcation 0
Code Tickets 0 Demandes d'ajout 0 Versions 0 Wiki Activité
462 Révisions
4 Branches
Aborescence: 12de8fff81
Branches Tags
${ item.name }
Créer la branche ${ searchTerm }
de '12de8fff81'
${ noResults }
Graphique des révisions

462 Révisions (12de8fff81626ad87874b11785590f0ca8bdc211)
 

Auteur SHA1 Message Date
  daid 12de8fff81 Support step motor controllers with active low step pins. il y a 12 ans
  Erik van der Zalm b67dacdc8f Fixed AD595 define il y a 12 ans
  Bernhard d3002ef741 corrected retract il y a 12 ans
  Bernhard 0c123950e9 __ header file replace il y a 12 ans
  Bernhard bf077125b9 added firmware retract. disabled by default il y a 12 ans
  Bernhard 88d2a671cc readme corrected il y a 12 ans
  Bernhard 0e5e249ab5 added individual pullup setting option to have finer control in case there is a special z-min sensor, for example il y a 12 ans
  Bernhard e792d62f47 readme il y a 12 ans
  Bernhard Kubicek 6b14f95b3e Merge pull request #170 from linagee/Marlin_v1 il y a 12 ans
  Bernhard Kubicek c7ce99d495 Merge pull request #172 from daid/Marlin_v1 il y a 12 ans
  Bernhard Kubicek b7fc14bc65 repaired thermistortable_6 by graphcial fitting of the off-slope values. see issue 179. Erik, I know you asked for no changes, but this file probably is not related and hopefully allright. il y a 12 ans
  ErikZalm 9e1021efbe Fixed SL bug. il y a 12 ans
  Daid e9bec9b6fe Fixed E1_ENABLE pin for Ultimaker. This was wrong for the 1.5.4 and 1.5.3 PCB (I cannot check the 1.5.6) il y a 12 ans
  linagee fbd282b3ba Update Marlin/Configuration.h il y a 12 ans
  linagee 2e8c5049c5 Update Marlin/thermistortables.h il y a 12 ans
  linagee 2d0d8e5272 Small correction. il y a 12 ans
  Daid 4d7fe7115f Changed M401 to M0/M1 as suggested, so they match normal CNC stop commands. il y a 12 ans
  linagee 9e9db65c3f Update Marlin/thermistortables.h il y a 12 ans
  linagee bd966ef389 Update Marlin/thermistortables.h il y a 12 ans
  linagee 775da3f103 Added top ratings and extended to ADC=1 for table 3 and 5. il y a 12 ans
  linagee 96a4baa0be Update Marlin/thermistortables.h il y a 12 ans
  linagee 2aa9f7b131 Update Marlin/thermistortables.h il y a 12 ans
  linagee c4490f5f3d Update Marlin/Configuration.h il y a 12 ans
  linagee dd9144994e Tested May 19 - It works! Verified with separate thermocouple TM-902C also. il y a 12 ans
  linagee 4c37d0d9f1 Extended range above 250C. (Operating range states up to 300C) il y a 12 ans
  Daid b59724e42b Add strigification for extruder amount in M115 report. il y a 12 ans
  Daid 16413bb8f2 Last M401 update, refresh the LCD during an M401 wait. il y a 12 ans
  Daid b3941fce5c Update after testing il y a 12 ans
  Daid d494688565 Do not initialize in the header file. il y a 12 ans
  Daid 516ec90242 Add M401 - Wait for user on LCD button press il y a 12 ans
  Daid 7244aa7eb7 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 il y a 12 ans
  linagee de2ca3b2e8 Grammar correction. il y a 12 ans
  linagee c2fc466e1b Update Marlin/Configuration.h il y a 12 ans
  linagee 241f5a4c0e Update Marlin/thermistortables.h il y a 12 ans
  linagee 9f9f498491 Update Marlin/Configuration.h il y a 12 ans
  Erik van der Zalm e31bef31ad Limit PID autotune PWM to PID_MAX il y a 12 ans
  ErikZalm b2a9ccdb97 Merge pull request #159 from MaikStohn/Marlin_v1 il y a 12 ans
  Erik van der Zalm d459fb41b7 Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1 il y a 12 ans
  ErikZalm 804e0d6117 Merge pull request #164 from guanix/Marlin_v1 il y a 12 ans
  ErikZalm bb499421e9 Merge pull request #166 from zittix/Marlin_v1 il y a 12 ans
  Erik van der Zalm ba96059203 add additional dropsegments test il y a 12 ans
  zittix fbd91ab0b5 Fixes #153 for bad call to abs() il y a 12 ans
  MaikStohn b51c06e2b3 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 il y a 12 ans
  MaikStohn 159ae90874 bug fix for scrolling of main menu when using SMALL_DISPLAY (2 lines only) il y a 12 ans
  MaikStohn e48f5aa6a7 fixed typo il y a 12 ans
  MaikStohn 1efe9ab497 changed encoder pos from int to long to fix problems setting x/y/z/e stepps_per_mm using the lcd menu il y a 12 ans
  Guan Yang 602c8ee02b Melzi support il y a 12 ans
  Daid 279d00da9f Fixed #if for Ultimaker. il y a 12 ans
  daid 830972ce3c Merge pull request #1 from ErikDeBruijn/Marlin_v1_Ultimaker-rc3 il y a 12 ans
  Bernhard Kubicek 451f9cc6d1 Residual in the comments: there are no more mm/minutes but only mm/sec in the planner buffer. il y a 12 ans