teemuatlut
1a79878dff
Remove TMC_Z_CALIBRATION in favor of Z_STEPPER_AUTO_ALIGN
6 jaren geleden
Jason
dc4786a504
Config files for PowerWASP Printer (#12889 )
6 jaren geleden
InsanityAutomation
082f6a27de
ADAPTIVE_FAN_SLOWING extension to hotend thermal protection (#12853 )
6 jaren geleden
Alain Martel
432c21456f
Add 3DFabXYZ Migbot example config (#12775 )
Co-Authored-By: Alain Martel <alain74martel@gmail.com >
6 jaren geleden
Ondřej Nový
a0ef6198ff
Level bed corners Z-hop height option (#12858 )
6 jaren geleden
Scott Lahteine
5f2d75f45b
Move PINS_DEBUGGING to @section develop
6 jaren geleden
Ludy
de4561c980
VORON Add LCD option BEEP_ON_FEEDRATE_CHANGE (#12822 )
6 jaren geleden
Kaushik Vemparala
ba7e35cbab
Add LCD option BEEP_ON_FEEDRATE_CHANGE (#12774 )
6 jaren geleden
jmz52
d372e7e477
SDIO support for STM32F1 (#12782 )
6 jaren geleden
jmz52
813a4ea107
Add support for Mks Robin TFT display (#12706 )
* Add support for MKS Robin TFT display
- Add support for MKS Robin TFT display and encoder for MKS Robin board.
- Generic 128x64 UI with x2 upscale is used (for now).
- Tested on MKS Robin TFT V2.0 with ST7789V controller.
6 jaren geleden
Scott Lahteine
288340cb6c
Followup to VORON
6 jaren geleden
Ludy
74c47803f7
Add VORON printer (#12705 )
6 jaren geleden
swilkens
b01a630bd0
[2.0.x] Correct Ender 3 bed size (#12769 )
6 jaren geleden
Roxy-3D
3a16cb6d7f
Slightly Slower Max X Axis speed
On some T-Rex 2+ machines the previous max step rate could lose steps....
6 jaren geleden
Ludy
cfc5e96b4b
Move JD to Config.h (and fix jerk->eeprom bug) (#12720 )
6 jaren geleden
jmz52
33abb86b7e
Add support for MKS Robin board (#12650 )
Implement initial support for MKS Robin (STM32F103ZET6) board.
Custom build script is used to generate encrypted firmware compatible with original MSK Robin bootloader (i.e. safe firmware update from SD card and possibility to go back to original close-source firmware).
6 jaren geleden
InsanityAutomation
367a9f65aa
Add Formbot 350c Thermistor (#12661 )
6 jaren geleden
Ondřej Nový
fcaed685b2
[2.0.x] Set DEFAULT_NOMINAL_FILAMENT_DIA to 1.75 in Anet A6 config (#12664 )
6 jaren geleden
Ondřej Nový
0572be9439
[2.0.x] Enable PIDTEMPBED in Anet A8 example config (#12655 )
6 jaren geleden
teemuatlut
7a5e637a37
Add spreadCycle parameter sets (#12645 )
6 jaren geleden
Dave Johnson
9a4a463ec4
Sanity-check LIGHTWEIGHT_UI, move comment up (#12630 )
6 jaren geleden
teemuatlut
55144284c2
TMC connection test, spreadCycle parameters, improved debugging (#12616 )
6 jaren geleden
Ludy
a7b3a61424
Improve some config comments readability (#12615 )
6 jaren geleden
Marcio Teixeira
b22716e938
M425 Backlash Correction (#11061 )
6 jaren geleden
Scott Lahteine
4388015f1a
Tweak config formatting
6 jaren geleden
teemuatlut
50b2fbd031
Trinamic: Split stealthChop, improve driver monitoring, etc. (#12582 )
6 jaren geleden
Scott Lahteine
9fbd73d931
Fix up some delta settings
6 jaren geleden
Dave Johnson
0947b92734
Build and CI fixes and optimizations (#12584 )
-Disable LDF "deep+" mode on AT90USB platforms. Appears not needed any longer (likely due to fix 7322df26ad/). Results in identical binary output and cuts compile time in half
-Disable Cartesio config from CircleCI (compile failure)
-Disable Geetech I3 Pro X GT2560 from CircleCI (compile failure)
-Enable EEPROM on Micromake example config (fix compile failure)
-Move FolgerTech/i3-2020 to AVR platform in CircleCI (fix CirculeCI build failure)
-Disable various examples failing to build in CircleCI
-Enable various examples no longer failing to build in CircleCI
6 jaren geleden
Scott Lahteine
7a361ad36a
Alternative fan image option (#12579 )
* Alternative fan bitmap
* Move bed over by 3px
6 jaren geleden
Scott Lahteine
4f9ec9ab45
Add heating progress bars (#12543 )
6 jaren geleden
David Bates
d94b50a3d8
Add sample config for Delta with MKS SBASE (#10819 )
6 jaren geleden
Scott Lahteine
b57343c255
Put status screen options in Configuration_adv.h
6 jaren geleden
Scott Lahteine
1fcc13b011
Allow Serial Overrun Protection to be disabled
6 jaren geleden
Scott Lahteine
4def8b3b5e
Expanded options for _Statusscreen.h (#12455 )
See the PR for full details. The updated system will be documented on the website in the near future.
6 jaren geleden
Ryan
052d102ded
UltiMachine Archim 1 support (#12404 )
6 jaren geleden
Scott Lahteine
1eb5249598
Fix Formbot Trex-2+ configs
Followup to #12422
6 jaren geleden
Roxy-3D
f19fd642ce
Updates to Formbot T-Rex 2+ configuration files (#12422 )
Updates to Formbot T-Rex 2+ configuration files
6 jaren geleden
Scott Lahteine
690c4e8457
Clean TLM trailing whitespace
6 jaren geleden
Scott Lahteine
a3923424c7
Clean up LCD width/height determination
6 jaren geleden
Scott Lahteine
a0c795b097
Encapsulate common display code in a singleton (#12395 )
* Encapsulate common LCD code in a singleton
* Depend more UBL code on UBL_DEVEL_DEBUGGING
- Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
6 jaren geleden
Scott Lahteine
30a49f5ee2
Apply extra condition to LCD_PROGRESS_BAR
6 jaren geleden
Scott Lahteine
47483e8c17
Update Raptor config
6 jaren geleden
articide
4260282df7
Tevo Little Monster example configuration (#12370 )
6 jaren geleden
revilor
b60abc7c37
[2.0.x] Macro G-codes (#9365 )
6 jaren geleden
InsanityAutomation
6471a75a22
Combine more tool-change variables (#12137 )
6 jaren geleden
Scott Lahteine
8def25e475
Set CUSTOM_MACHINE_NAME for some configs
6 jaren geleden
Phr3d13
a813900fce
Add Geeetech Rostock 301 config, update GTM32 Pro VB pins (#12345 )
6 jaren geleden
Scott Lahteine
3866aeac52
Clean up ENCODER_RATE_MULTIPLIER config
6 jaren geleden
Scott Lahteine
498dfa291e
Update and fix CHDK
6 jaren geleden
Scott Lahteine
1769249876
Recommend keeping endstops off
6 jaren geleden