marlin

Graphique des révisions

Auteur	SHA1	Message	Date
Scott Lahteine	356af7dcb0	Tweak Sanguinololu-related pins files	il y a 8 ans
Scott Lahteine	11a724d8fc	Sanguinololu example configuration	il y a 8 ans
Scott Lahteine	e337df2e98	Miscellaneous tweaks to serial outputs, code cleanups	il y a 8 ans
Vben	c0409b85e7	New feature: Part-Cooling Fan Multiplexer	il y a 8 ans
GMagician	6127154af3	Fix identation by tab There was a tab instead of spaces	il y a 8 ans
GMagician	b94a1c6b9f	Code reduction this some configurations When switching noozle and extruder but these operations are done by the same servo in 'setup' function there is a unnecessary call	il y a 8 ans
GMagician	405a2132f3	#7529 compile fix I made an error in previous fix	il y a 8 ans
GMagician	869d7f3703	#7504 missing part #7504 integration has missed this part. When more than 1 servo is used with bltouch it's impossible to predefine default servo delay for it. In my original fix I completely removed this part but maybe this is a better compromise	il y a 8 ans
Vben	4817b39d98	Added new feature for AutoParking Extruder (APE)	il y a 8 ans
Scott Lahteine	6772e33ef6	Use [XY]_CENTER for error correction Followup to #7512	il y a 8 ans
MTrab	5fa61c0ad3	Add Anet 1.0 to Platformio.ini Added env:anet10 to platformio.ini for easy compile and upload to this board	il y a 8 ans
Tannoo	b33739d493	UBL_Language_Update (#7520) * UBL_Language_Update Translatable strings * Use slightly better wording... * Use slightly better wording...	il y a 8 ans
Scott Lahteine	a1878cd1c0	Add "Level Corners" menu option	il y a 8 ans
Scott Lahteine	0a18fb735e	Use "PSU" label to fit on screen	il y a 8 ans
Scott Lahteine	30887feae3	Tweak some formatting in ABL G29	il y a 8 ans
Thomas Moore	257b693ab0	Advanced pause fixes (#7518) * Disallow filament change while paused * Use kinematic movemements in pause_print and resume_print	il y a 8 ans
Tannoo	ab2ac1af71	UBL_LCD_storage_corrections (#7517) Correcting the storage selection. Also EEPROM error handling on the LCD.	il y a 8 ans
cdedwards	f1843211e6	Fix for G26 spam output while heating, G26 will continuously spam the heater states instead of printing it out every 5000ms.	il y a 8 ans
Roxy-3D	be5ca34215	Allow G29 to work correctly even if nozzle is off the mesh. (#7512) * work around previous regressions...	il y a 8 ans
GMagician	e9c72978c7	Implement SERVO_DELAY as array This modify give SERVO_DELAY x servo basis	il y a 8 ans
Scott Lahteine	96ae53cf41	Use MOVE_SERVO macro where possible	il y a 8 ans
Scott Lahteine	3be9c19f12	Hold on move axis screens	il y a 8 ans
Scott Lahteine	8fd58cd6dc	Patch goto labels for consistency	il y a 8 ans
Scott Lahteine	75e6f72c89	Fix hexadecimal number formatting	il y a 8 ans
Scott Lahteine	ac76101ec3	Eliminate goto in gcode_M48	il y a 8 ans
Scott Lahteine	75e6ead5fd	Eliminate goto in gcode_G33	il y a 8 ans
Scott Lahteine	6bd63d27b5	Updates to G29 for probe error handling	il y a 8 ans
Thomas Moore	f54e0fc90f	Prevent damage if DELTA_HEIGHT is incorrect	il y a 8 ans
Scott Lahteine	0938c62b48	Neater position_is_reachable call	il y a 8 ans
Scott Lahteine	9d95b1b4df	Tweak Conditionals_post.h	il y a 8 ans
Scott Lahteine	35d5a7bdff	Tweak CR-10 config/pins	il y a 8 ans
Frederik Kemner	25a11cd485	Use bed size and inset instead of travel limits to define mesh area\n\nAs proposed in #7435 (#7480)	il y a 8 ans
Scott Lahteine	7f3406d47b	Fix Italian string length Addressing #7264	il y a 8 ans
etagle	2864ef8c7f	Slight improvement to the line parsing logic, saving 8 cycles per character	il y a 8 ans
etagle	534bbb81ff	Adding XON/XOFF and STATISTICS implementation	il y a 8 ans
etagle	3e5485de92	Enforcing requirements so XON/XOFF software handshake works and no drops of data are experienced while transferring data to an SD Card. I tested this with a CH340 USB to serial adapter (quite typical) at baudrates as high as 1000000 on a Atmega2560 running at 16Mhz, with no problems at all. We need a 1024 byte RX buffer. Less than that and we will have drops, higher than that is not needed	il y a 8 ans
etagle	9e147e9ac4	Adding XON/XOFF and STATISTICS configuration settings and proper documentation on their usage for serial port	il y a 8 ans
etagle	8ab2e420f6	Adding separate RX_BUFFER_SIZE configuration setting and proper documentation on its usage	il y a 8 ans
etagle	b4c53af07d	Adding a new macro to be able to determine if a given integer value is a power of 2	il y a 8 ans
Jozsef Kiraly	97c21e9007	Support for Geeetech GT2560 Rev.A/Rev.A+	il y a 8 ans
Scott Lahteine	b2822a59f9	Add a sanity check for valid bed size	il y a 8 ans
Scott Lahteine	a7e5c1bf19	Use float to init TMC2133 steps-per-mm	il y a 8 ans
Scott Lahteine	dd66d21749	Extend DEACTIVATE_SERVOS_AFTER_MOVE sanity-check As proposed in #7429	il y a 8 ans
richarddeweerd	b370906031	Example config for Geeetech I3 Pro X with GT2560 controller	il y a 8 ans
Scott Lahteine	804818b4d9	Bring configs up to date	il y a 8 ans
Florian Heilmann	0fd2923a9f	Fix compilation with ADVANCED_PAUSE_FEATURE without SDSUPPORT (#7412) * Fix compilation of ADVANCED_PAUSE_FEATURE without SDSUPPORT * Fix Identation * Make use of IS_SD_PRINTING macro as per @MagoKimbra	il y a 8 ans
benlye	24af9e1bf4	Make audible user script feedback optional Add a parameter to enable/disable audible user script feedback	il y a 8 ans
Florian Heilmann	6827a162bb	Update language_de.h Add MSG_BLTOUCH MSG_DELTA_SETTINGS MSG_UBL_MESH_EDIT MSG_UBL_OUTPUT_MAP_BACKUP MSG_UBL_STEP_BY_STEP_MENU MSG_Z_FADE_HEIGHT	il y a 8 ans
Scott Lahteine	3497153cf1	Followup cleanup patch Fix regression in #7428	il y a 8 ans
Scott Lahteine	622048ffb0	Clean up whitespace, trailing space, bad tab conversion, etc.	il y a 8 ans

Première Page Précédente ... 8 9 10 11 12 ... Page Suivante Dernière

7280 Révisions (1bbf55a7f735f76ac83ed16052b95a17056b110b)