marlin

Commit Graph

作者	SHA1	備註	提交日期
AnHardt	27d7d2ccab	Correct bracketing for COREXY-XZ	10 年之前
Scott Lahteine	278aa15301	Add COUNT macro and apply	10 年之前
Scott Lahteine	000a6fce46	Extract update_endstops from stepper ISR (PR#2474)	10 年之前
Scott Lahteine	9f53e2f0c9	Implement COREXZ in stepper.cpp and planner.cpp	10 年之前
Richard Wackerbarth	e83575537a	Compiler defines USBCON for USB devices (PR#2433)	10 年之前
Scott Lahteine	87a872e103	Use st_get_position_mm where possible (PR#2411)	10 年之前
Scott Lahteine	d135b15bb8	Init all endstop bits to 0 (PR#2332)	10 年之前
AnHardt	0d9d21d15f	Add a semicolon to make Z_DUAL_STEPPER_DRIVERS compile again.	10 年之前
wurstnase	0f3f7d6835	clean up double endstops	10 年之前
Scott Lahteine	d76a01194d	Slight size reduction by adding idle()	10 年之前
wurstnase	94120740d8	faster compare !(~(ab)&0x3) and ab == 0x3 are equal	10 年之前
wurstnase	ff98b8632b	new endstop bits	10 年之前
AnHardt	bc0764894a	Shift call of start_watching_heater() into setTargetHotend() to warrant watching is set or reset. Make setTargetBed() in _lcd_preheat() dependant of TEMP_SENSOR_BED. Use disable_all_heaters() in lcd_cooldown() and abort_on_endstop_hit.	10 年之前
wurstnase	21ff773832	rework out_bits	10 年之前
Scott Lahteine	c54a2ea042	Adjust spacing in Marlin_main.cpp and stepper.*	10 年之前
Scott Lahteine	072625ccad	Update headings in Marlin_main.cpp and stepper.cpp	10 年之前
Wurstnase	1d5677cc3b	add missing Z-bits	10 年之前
Wurstnase	df12e68e7d	add missing Z_PROBE-bit	10 年之前
Wurstnase	b55f32f8a1	replace some bools this PR replaces some bools with one char. this will safe 3 bytes and should also be sometimes a little bit faster.	10 年之前
Wurstnase	073e4af7e2	We don't need the old standard one. The STEP_ADD and STEP_IF_COUNTER are also good for non-Toshiba stepper driver.	10 年之前
Wurstnase	79a44a9de3	stepper.cpp macros rework delete some tabs	10 年之前
Chris Palmer	483384aaa4	Fixed faulty comment merge	10 年之前
Chris Palmer	cc6b7cf3ce	Fixed some comment spellings.	10 年之前
Chris Palmer	e4595fa24a	Fixed jump in speed when using high accelerations on axes with lots of steps. I.e., when acceleration * steps per mm > 2,000,000. This was done by changing MultiU24X24toH16 to take a 32b bit operand. Removed the claim that stepper.cpp uses the Leib algorithm.	10 年之前
Scott Lahteine	53be0f3399	Babystep delay 2us	10 年之前
Scott Lahteine	7336e6df07	Always define old_z, not always z2	10 年之前
Scott Lahteine	5dd87d2e74	Enable all old_z_*_endstop vars for Z_DUAL_ENDSTOPS - Potentially addressing #1911	10 年之前
Scott Lahteine	ccddc280be	Apply three more commits	10 年之前
Scott Lahteine	8857b9e921	Use the extruder argument in plan_buffer_line	10 年之前
Scott Lahteine	d867c18535	Fix compile error with Z_DUAL_ENDSTOPS	10 年之前
Scott Lahteine	b98ebd517e	disable / enable_all_steppers functions	10 年之前
Scott Lahteine	0e8182bbf2	Additional pin tests, cleanup	10 年之前
Chris Roadfeldt	a57862e29f	Cleaning up code in prep for merge with upstream.	10 年之前
Chris Roadfeldt	a508d835db	Changed Z_PROBE_AND_ENDSTOP to Z_PROBE_ENDSTOP. Updated documentation in Configuration.h. Cleaned up and commented some code relating to Z_PROBE_ENDSTOP. Separated Z_MIN_ENDSTOP and Z_PROBE_ENDSTOP completely.	10 年之前
Chris Roadfeldt	17707e7479	Fixed Z_PROBE_PIN pullup bug. Documented some additional areas that should be addressed if Z_PROBE is fully separated from Z_MIN or Z_MAX. Fixed a documentation error in sanity checks. Servos start at 0 not 1.	10 年之前
Scott Lahteine	3348b3bf0c	Allow SD_FINISHED_RELEASECOMMAND to be undefined	10 年之前
Chris Roadfeldt	ec1d9c0b8f	Use Z_PROBE_ENDSTOP_INVERTING when checking pin status.	10 年之前
Chris Roadfeldt	e08f8eed05	Revert 06f767d..cba5692 This rolls back to commit 06f767d608.	10 年之前
Scott Lahteine	d73b169de3	Apply leveling for DELTA, - Fix `prepare_move` function not calling `adjust_delta` - Add more shorthand for plan_buffer_line. - Fix wrong `federate` usage, assuming they are all mm/m - Minor `stepper.cpp` cleanup	10 年之前
AnHardt	2b959a7752	Some additional {} to make the compiler happy.	10 年之前
Chris Roadfeldt	324c14943b	Bug fixes for Z_PROBE_AND_ENDSTOP. Code cleanup for Z_PROBE_AND_ENDSTOP. Added Z_PROBE_PIN to pins_RAMPS_13.h	10 年之前
Scott Lahteine	afff968e88	ARRAY_BY_EXTRUDERS, shorthand to sync planner - Add some documentation to planner and stepper headers - Patch up RAMBO pins with undefs - Add `sync_plan_position` inline to set current XYZE - Swap indices in `extruder_offset` to fix initialization values	10 年之前
Chris Roadfeldt	92eb8109ab	Fix declaration of old_z_probe_endstop.	10 年之前
Chris Roadfeldt	9f3ff14008	Enabled separate Z Probe and Z Axis endstop use at same time. Typo fixes in comments in existing code.	10 年之前
Scott Lahteine	ba871e46bf	Fix compiler warnings - Patched up for most included configurations	10 年之前
Scott Lahteine	55739a4efe	Fix Z_APPLY_STEP	10 年之前
Scott Lahteine	19d418cd6a	Fix up the code to eliminate warnings	10 年之前
Scott Lahteine	267d6bef15	Eliminate most warnings - Fix a bug reading `code_value` for `M503 Sn` - Hide and remove unused variables	10 年之前
alexborro	0ce3576685	New Feature: Z_DUAL_ENDSTOPS Z_DUAL_ENDSTOPS is a feature to enable the use of 2 endstops for both Z steppers - Let's call them Z stepper and Z2 stepper. That way the machine is capable to align the bed during home, since both Z steppers are homed. There is also an implementation of M666 (software endstops adjustment) to this feature. After Z homing, this adjustment is applied to just one of the steppers in order to align the bed. One just need to home the Z axis and measure the distance difference between both Z axis and apply the math: Z adjust = Z - Z2. If the Z stepper axis is closer to the bed, the measure Z > Z2 (yes, it is.. think about it) and the Z adjust would be positive. Play a little bit with small adjustments (0.5mm) and check the behaviour. The M119 (endstops report) will start reporting the Z2 Endstop as well.	10 年之前
Scott Lahteine	582cd780cd	Fix compile error with `*_DUAL_STEPPER_DRIVERS` - Patch up macros in stepper.cpp	10 年之前

188 次程式碼提交 (27d7d2ccab6fca5db9d9e67366f1d28bf9d8d1e1)