marlin

提交图

作者	SHA1	备注	提交日期
Scott Lahteine	27f7e3fe6f	Hide problem pins in pin debug list	7 年前
Scott Lahteine	9c21191f74	Rename SPI class to avoid conflict (good?)	7 年前
Scott Lahteine	51f195e698	Move dwell to gcode	7 年前
Scott Lahteine	4f1eadf41f	FILAMENT_WIDTH_SENSOR feature	7 年前
Scott Lahteine	d5fe0fb02b	Consolidate PrintCounter	7 年前
Scott Lahteine	551752eac7	Consolidate "bedlevel" code	7 年前
Scott Lahteine	71aefc2e22	Move heater output to Temperature class	7 年前
Scott Lahteine	63228fc453	Move volumetric flag to GCodeParser	7 年前
Scott Lahteine	bf7af95db3	Move flow_percentage to Planner	7 年前
Scott Lahteine	8dc2838d98	Move host keepalive to GcodeSuite	7 年前
Scott Lahteine	8fbb833de9	Encapsulate RGB(W) LEDs	7 年前
Scott Lahteine	a98e9874db	FWRETRACT as a feature	7 年前
Scott Lahteine	722786966a	Add gcode.cpp, motion., queue. - Apply to some G-codes.	7 年前
Scott Lahteine	4231faf779	Initial split-up of G-code handlers by category	7 年前
Scott Lahteine	e0a189a481	Consolidate Buzzer	7 年前
Scott Lahteine	bca67a5b79	Main controller updates	7 年前
Scott Lahteine	142d8aae56	Move debugging to serial.*	7 年前
Scott Lahteine	a1e2b5da70	Fix LCD_PINS_Dn tests in pinsDebug_list.h	7 年前
Scott Lahteine	038f82cc38	Fix L6470 init and options	7 年前
Scott Lahteine	42e2dd9251	Build file updates	7 年前
Scott Lahteine	614a86a380	SD file updates	7 年前
Scott Lahteine	82fff87e16	Pins updates	7 年前
Scott Lahteine	3d8a0ab4b2	Module updates	7 年前
Scott Lahteine	0fcec02db5	LCD updates	7 年前
Scott Lahteine	7dd0a46732	Language updates	7 年前
Scott Lahteine	4a82e95c3e	Feature file updates	7 年前
Scott Lahteine	d7ee81202f	Libs updates	7 年前
Scott Lahteine	34101224c4	Inc updates	7 年前
Scott Lahteine	f52a31a275	Core updates	7 年前
Scott Lahteine	479652073b	Config updates	7 年前
Scott Lahteine	54326fb06a	HAL updates	7 年前
Scott Lahteine	7e42c7563c	Move build files into place	7 年前
Scott Lahteine	b66d65f865	Move 'sd' files	7 年前
Scott Lahteine	0b9a88d6ce	Move 'pins' files	7 年前
Scott Lahteine	2b3b7d5d7f	Move 'thermistor' files	7 年前
Scott Lahteine	0c9231fd04	Move 'module' files	7 年前
Scott Lahteine	efa578d6b0	Move 'libs' files	7 年前
Scott Lahteine	cc92e544a5	Move 'lcd' files	7 年前
Scott Lahteine	5be07b5db2	Move 'inc' files	7 年前
Scott Lahteine	9ea2ff950a	Move 'gcode' files	7 年前
Scott Lahteine	4e4d16c92e	Move 'core' files	7 年前
Scott Lahteine	fa5f9c2aec	Move 'feature' files	7 年前
Scott Lahteine	f536c4dccb	Move configs	7 年前
Scott Lahteine	48351fd6d5	Move root sources	7 年前
Scott Lahteine	27cbb939b2	Clean up some HAL code	7 年前
Christopher Pepper	8afe13b1a2	Fix compile issue when watchdog was disabled	7 年前
Christopher Pepper	b908e38d08	Add needed platform defined gaurds to compile with Arduino IDE Also removed explicit platform HAL directory inclusion from platformio.ini to make sure these errors are caught by Travis in the future	7 年前
Scott Lahteine	2af62a5d8d	Apply spacing, const to some HAL code	7 年前
kfazz	18f97c4013	add HardwareSerial and SoftwareSerial for Re-ARM. HardwareSerial has been tested on Uart0 (debug header) and Uart3 (i2c connector) Software Serial has been tested to work bi-directionally at 9600 and 115200 using pins 6 and 63 on J5, and unidirectionally (write only) at 250000. The code used to test was Teemuatlut's tmc2208 patch, and a few small changes to main used to echo recieved chars back to a host pc.	7 年前
Bob-the-Kuhn	01fb45b4f8	hybrid PWM system Uses PWM1 to directly control pins 4, 6 & 11 (servo 0, 1 & 3) and PWM1 generated interrupts to control other pins. Interupt control of the servo pins had too much jitter so switched all that we could to PWM1 direct control. The PWM1 direct control pins have less than 1 microsecond pulse width jitter while the interrupt controlled ones can have 20+ microseconds of jitter. Also added insurance to the servo code in the "disable servo after move" section.	7 年前

67 次代码提交 (27f7e3fe6f8493ef7390dba9d5ab0ceebab38b6d)