marlin

Wykres commitów

Autor	SHA1	Wiadomość	Data
Scott Lahteine	28f1276286	[2.0.x] Add Z_AFTER_PROBING option (#10058) Some "fix-mounted" probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.	7 lat temu
Scott Lahteine	79e6d890d5	Add UNKNOWN_Z_NO_RAISE to example configs	7 lat temu
Scott Lahteine	a2a672449a	Updated boot screen description	7 lat temu
Scott Lahteine	54c65fc3cb	Standardize LCD buzz defaults	7 lat temu
Scott Lahteine	4953fb1c88	Standardize encoder defaults	7 lat temu
Scott Lahteine	5684beae90	Bring some configs up to speed	7 lat temu
Scott Lahteine	2024775e07	Spanish (UTF8) Language (#9786) From #7314 by @MrAmericanMike	7 lat temu
Scott Lahteine	17d984eab3	Add RESTORE_LEVELING_AFTER_G28 to example configs	7 lat temu
Scott Lahteine	7d8c6b3f3c	Add 20x4 option for Sainsmart LCD (#9740)	7 lat temu
Scott Lahteine	8733d5a296	Add NUM_RUNOUT_SENSORS to example configs	7 lat temu
Scott Lahteine	ca55f2927a	Pulldown pin mode support (#9701) Implemented for LPC1768.	7 lat temu
Roxy-3D	21e60fd3ed	Allow user to control Z-Height correction for off mesh movements (#9661)	7 lat temu
Scott Lahteine	b5e92f4f90	[2.0.x] Enable / disable PSU automatically (#9503)	7 lat temu
Scott Lahteine	eecb0188c0	Add ULTI_CONTROLLER to example configs	7 lat temu
Scott Lahteine	4925f60cff	Add MALYAN_LCD to configs	7 lat temu
Scott Lahteine	7d6c009104	Add thermistor 15 tuned for JGAurora A5	7 lat temu
Scott Lahteine	348b454401	Probe bounds based on bed size	7 lat temu
Scott Lahteine	c68ce8667d	Fix and improve Creality configs	7 lat temu
Scott Lahteine	57b61491d3	Set FIL_RUNOUT_PIN for Creality CR10-S Tested with M43 and found to be connected to DIO 2	7 lat temu
Scott Lahteine	4a4d832344	Use standard encoder pulses/steps for CR-10S	7 lat temu
Scott Lahteine	fa432508b0	Followup to Ender config	7 lat temu
Scott Lahteine	a27fa80a7e	More featureful CR-10S configuration	7 lat temu
Scott Lahteine	77c2d810f9	Bring configs up to date	7 lat temu
Scott Lahteine	8ac246162e	Creality CR-10S configurations Provided by printedsolid.com	7 lat temu
Scott Lahteine	048486390e	Bring some configs up to date	7 lat temu
GMagician	5295b4713d	[2.0.x] add semitec 104NT-4 (#9119) Table is very very similar to old 104-GT2 so I added only the name and recycled old ID	7 lat temu
Scott Lahteine	0b4a46fa6c	Bring configs up to date with 1.1.x	7 lat temu
Scott Lahteine	7cc2193bce	Add Tronxy X1 example config (#8972)	7 lat temu
Thomas Moore	f0a8a1a853	[2.0.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE (#8866) * Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE	7 lat temu
Scott Lahteine	28fc8741d6	Reduce default jerk. XY by half. Z by 1/4	7 lat temu
Scott Lahteine	1cf1cf8759	Add RADDS_DISPLAY to example configs	7 lat temu
Scott Lahteine	f79026acc1	Apply MKS_12864OLED_SSD1306 to examples Followup to #8814	7 lat temu
Scott Lahteine	9abbcc3ee0	Apply ZONESTAR_LCD to example configs	7 lat temu
Scott Lahteine	69d49a2438	Shorter segments may be better	7 lat temu
Scott Lahteine	d7800e7975	Apply MULTIPLE_PROBING to example configs	7 lat temu
Richard Wackerbarth	c1184552ac	Change K1 to required option PID_K1	7 lat temu
Scott Lahteine	aa7efb96bf	Bring configurations up to date	7 lat temu
Scott Lahteine	082ab8fcab	Add SKEW_CORRECTION to example configs	7 lat temu
Scott Lahteine	7c61bcb058	Apply SEGMENT_LEVELED_MOVES to example configs	7 lat temu
Scott Lahteine	5926c9c97b	Followup for MESH_EDIT_GFX_OVERLAY	7 lat temu
Scott Lahteine	5ce7f23afa	Config option G26_MESH_VALIDATION for all meshes	7 lat temu
Scott Lahteine	3f0a982b8c	Move Filament Width Sensor to Configuration_adv.h	7 lat temu
Scott Lahteine	b76e173205	Move test extrusion options under G26	7 lat temu
Scott Lahteine	81b91b3f9d	Clean up some trailing white-space	7 lat temu
Roxy-3D	967104e1ce	Default Extrusion Settings were off a few lines in some of the example config files. (#8333)	7 lat temu
Roxy-3D	ed62c621d7	Fix G26 Circle Drawing. Add Default Extrusion Settings (#8313) - Fix G26 Circle Drawing. - Add default extrusion settings so machine can print lines on print bed - Yet to be done: Get LCD Menu's to use these settings.	7 lat temu
Scott Lahteine	2c099fd4c2	Update Thermal Protection Documentation	7 lat temu
Scott Lahteine	7e43dd1d23	Fix probes configuration url Based on #8241 by @machaj	7 lat temu
teemuatlut	70be4d206e	[2.0.x] UltiMachine Archim2 (#8190) * UltiMachine Archim2 support * SPI gets included by the library * Invert TMC2130 diag pin state * Clean up Archim2 pins * Update Archim2 config * FAN2 -> FAN1 * Cleanup * Add brief Archim installation instructions * Bring pins into compliance * Update 1.0 SD Detect pin for 1.1 * Update Configuration.h * Update pins_ARCHIM2.h	7 lat temu
android444	9cc1d8e312	[2.0.x] Support for SilverGate Board	7 lat temu

24 Commity (28f1276286da94f4a1b3a7bffa103a35a3ee8352)