marlin

Commit graph

Autor	SHA1	Nachricht	Datum
MagoKimbra	37a26dfc09	Fix delta_angles	vor 8 Jahren
Scott Lahteine	2defb1d748	Use SET_INPUT_PULLUP where appropriate	vor 8 Jahren
Scott Lahteine	58b3e98878	Use arrays for delta tower parameters	vor 8 Jahren
Scott Lahteine	47242a40bb	Apply updated changes for delta_tower_angle_trim	vor 8 Jahren
Jimmy Envall	00b6b3da79	Added support for delta tower angle corrections.	vor 8 Jahren
Scott Lahteine	5a456c832a	Apply TMC2130 to example configurations	vor 8 Jahren
Scott Lahteine	45f949d833	TMC2130 Library: @teemuatlut replaces @makertum	vor 8 Jahren
Scott Lahteine	6aa81255a9	Patch and clean up "flsun" kossel. Followup to #5911.	vor 8 Jahren
Scott Lahteine	b2270b3f3e	Apply prior nozzle clean update	vor 8 Jahren
Marek Pikuła	7698c5617a	Added circle nozzle cleaning parameters to example configurations	vor 8 Jahren
Marek Pikuła	6836b94eea	Added circle pattern for nozzle cleaning feature	vor 8 Jahren
Scott Lahteine	3830778852	Apply NO_WORKSPACE_OFFSETS to lcd menu	vor 8 Jahren
Scott Lahteine	7e3aab889d	Fix preheat menu formatting	vor 8 Jahren
Scott Lahteine	fea0d3f20f	Endstop and temp-isr general cleanup	vor 8 Jahren
Scott Lahteine	aef08e8780	Compact some macro substitutions	vor 8 Jahren
Scott Lahteine	6c5312559c	Menu item to preheat only the hotend	vor 8 Jahren
Scott Lahteine	9d0142e8ae	Move Change Filament above Cooldown	vor 8 Jahren
Scott Lahteine	0c55095c5e	Move Cooldown above Preheat	vor 8 Jahren
Scott Lahteine	bfb0007573	Patch DISTINCT_E_FACTORS bug	vor 8 Jahren
Scott Lahteine	8e89a802f7	Document PROTOCOL_VERSION	vor 8 Jahren
Scott Lahteine	87b03b16bd	Use a macro for array copies	vor 8 Jahren
Scott Lahteine	e141f3a03f	Optimize coordinate transformation Pre-compute the combined position shift and home offset to save a single float fetch-and-add per conversion. Great for delta/scara and bed leveling.	vor 8 Jahren
Scott Lahteine	5f7e85398b	Implement NO_WORKSPACE_OFFSETS	vor 8 Jahren
Scott Lahteine	05abe853f9	New option: NO_WORKSPACE_OFFSETS	vor 8 Jahren
benlye	dead89062a	Update Marlin_main.cpp Remove unnecessary line break from M48 V1 output.	vor 8 Jahren
MagoKimbra	ae277aebc6	Stepper indirection fix tmc driver	vor 8 Jahren
Scott Lahteine	8f4e4b1995	Display a message for EEPROM version mismatch	vor 8 Jahren
Scott Lahteine	cea3ea772c	Fix submenu hotend status display	vor 8 Jahren
Scott Lahteine	53f5086905	Fix MAKRPANEL assignments MAKRPANEL is a DOGLCD+ULTRA_LCD+NEWPANEL so customize its pins within that block.	vor 8 Jahren
Scott Lahteine	98c7b682ca	General cleanup, const usage, var naming	vor 8 Jahren
jes	369bfc8a1e	Reduce code size (40b, or 166b with bilinear subdivision)	vor 8 Jahren
Scott Lahteine	0d13412105	Fix "Heating..." message	vor 8 Jahren
divendres	75ad82baab	Update Catalan language	vor 8 Jahren
Scott Lahteine	34253497d4	Babysteps code tweak As suggested by https://github.com/MarlinFirmware/Marlin/pull/5887#issuecomment-283832163	vor 8 Jahren
Scott Lahteine	fb4aead2b1	Clean up and finish #5887	vor 8 Jahren
Scott Lahteine	b3e2bd6f29	Reduce E_D_ratio code	vor 8 Jahren
Sebastianv650	de6c40ed8f	Add option to fix E/D ratio Work around for slicers producing buggy gcode.	vor 8 Jahren
Scott Lahteine	eeb490221f	Remove BEEPER_PIN override in pins_RIGIDBOARD.h Resolves #5926. This override is no longer needed since the RAMPS LCD controller pins were fixed.	vor 8 Jahren
teemuatlut	9175d16660	Fix formatting of print time hours above one day	vor 8 Jahren
Scott Lahteine	b6d9eb229f	Extend Core endstop commentary	vor 8 Jahren
Bob-the-Kuhn	c5e08e8761	CoreYX/YZ/ZX needs different endstop logic than CoreXY/YZ/XZ In the endstop testing section, add the "reverse" logic in addition to "normal" core handling. In CoreXY/YZ/XZ steppers rotating the same direction gives X movement. Opposing directions produces Y movement. In CoreYX/ZY/ZX this is reversed. Same = Y, Opposite = X. ---- Fixes the issue where the Y endstop was being checked when moving in the X direction, etc.	vor 8 Jahren
Scott Lahteine	c759c26cca	Make LCD_TIMEOUT_TO_STATUS configurable As suggested in https://github.com/MarlinFirmware/Marlin/issues/5570#issuecomment-283059 065	vor 8 Jahren
Michael Henke	47729918fc	enable ENSURE_SMOOTH_MOVES	vor 8 Jahren
Michael Henke	330b981912	created Configuration.h and Configuration_adv.h for the kossel mini sold by flsun	vor 8 Jahren
Colin Gilgenbach	48b7e0f8d8	Nozzle Wipe Vertical Zig-Zag - Add configuration support for zigzags in either the X or Y axis, for wipe pads significantly longer in one dimension. - Add configuration for default number of zig-zag triangles, vs. a magic number in `Marlin_main.cpp`. - Update description of auto nozzle wiping to match functionality	vor 8 Jahren
Scott Lahteine	f17b81b765	Add MAPPER_C2C3 to French language	vor 8 Jahren
Roxy-3D	7e607b06eb	Better comments on DOUBLE_CLICK_TIME_WINDOW	vor 8 Jahren
Scott Lahteine	34cba42104	Use PSTR for MSG_HEATING	vor 8 Jahren
Roxy-3D	584d147a02	fixup the indentation	vor 8 Jahren
Roxy-3D	e443e0e2a9	Fix scoping issues for double click to Z-Babystepping	vor 8 Jahren

Erste Vorherige 1 2 3 4 5 ... Nächste Letzte

5856 Commits (37a26dfc098e35feb193750f1e2f7a76a36b1bb5)