marlin

Commit graph

Autor	SHA1	Nachricht	Datum
etagle	40d7e12827	Removing warnings from compilation	vor 7 Jahren
Scott Lahteine	fb608938f8	Prevent compilation of unused u8g-oriented code	vor 7 Jahren
Scott Lahteine	37b15fe4cf	Reorder HAL timer header items	vor 7 Jahren
Scott Lahteine	883b0c9880	Convert custom maths to inlines (#10728)	vor 7 Jahren
Scott Lahteine	99ecdf59af	Smarter MIN, MAX, ABS macros Use macros that explicitly avoid double-evaluation and can be used for any datatype, replacing `min`, `max`, `abs`, `fabs`, `labs`, and `FABS`. Co-Authored-By: ejtagle <ejtagle@hotmail.com>	vor 7 Jahren
etagle	9d98a62699	Followup to HAL optimizations and delays - Cleanups, fixes for Due HAL code. - TC_IER is write-only. Use TC_IMR to test ISR state.	vor 7 Jahren
Scott Lahteine	a1062eec5b	Better handling of DELAY_NS and DELAY_US (#10716) Co-Authored-By: ejtagle <ejtagle@hotmail.com>	vor 7 Jahren
etagle	1b225a2809	DUE: Emergency parser for the USB CDC	vor 7 Jahren
Scott Lahteine	0436e16fb2	Apply shorthand Assembler macros	vor 7 Jahren
Scott Lahteine	d1b619be52	Standardize some hexadecimals	vor 7 Jahren
Scott Lahteine	81b632c255	Additional temp-oriented improvements	vor 7 Jahren
nightdemonx	e911635fb1	Add thermocouple with AD8495 support	vor 7 Jahren
Scott Lahteine	3f68203324	Modify FastIO error message	vor 7 Jahren
Scott Lahteine	a474a7e675	Correct AVR_ATmega328_FAMILY macro …as with #10540 Co-Authored-By: per1234 <per1234@users.noreply.github.com>	vor 7 Jahren
Scott Lahteine	456cf971af	HAL FastIO cleanup and fixes	vor 7 Jahren
J.C. Nelson	5b5e322356	Set Interrupt Priorities and Grouping for STM32F103. (#10517)	vor 7 Jahren
Scott Lahteine	2578996631	[2.0.x] Emergency parser for multiple serial ports (#10524)	vor 7 Jahren
Chris Pepper	2242b98248	[LPC176x] Emergency Parser Feature (#10516)	vor 7 Jahren
Eduardo José Tagle	c1e5ebbc1e	[2.0.x] AVR: Atomic bit set and clear of upper pin ports without critical section (#10502) * AVR: Atomic bit set and clear The critical section can be dropped, saving 3 cycles per access. Also simplified pin toggling for all ports.	vor 7 Jahren
Scott Lahteine	a3ce8a3fcd	Add sanity checks for EMERGENCY_PARSER	vor 7 Jahren
Eduardo José Tagle	0c428a66d9	Proper AVR preemptive interrupt handling (#10496) Also simplify logic on all ARM-based interrupts. Now, it is REQUIRED to properly configure interrupt priority. USART should have highest priority, followed by Stepper, and then all others.	vor 7 Jahren
Scott Lahteine	f423e54f77	Strip trailing spaces	vor 7 Jahren
Scott Lahteine	cb46cb8480	Add HAS_HEATED_BED conditional (#10495)	vor 7 Jahren
Scott Lahteine	dea686cf55	Define short pin names in fastio for STM32 (#10461)	vor 7 Jahren
Karl Andersson	428c54f2ad	[2.0.x] HAL for STM32F4 (#10434)	vor 7 Jahren
GMagician	20772492aa	Fix compile warnings in AVR fastio.h (#10440)	vor 7 Jahren
Chris Pepper	c9aed73987	Fix missed includes from HAL macro patch (#10416)	vor 7 Jahren
Scott Lahteine	29dda871cb	Patch "upload_disk" to make python happy	vor 7 Jahren
Chris Pepper	cc6d41e1d3	Use a macro for HAL header redirection (#10380)	vor 7 Jahren
Bob-the-Kuhn	85014cd132	[2.0.x] LPC1768 - automatic selection of upload disk (#10374)	vor 7 Jahren
Scott Lahteine	44a697ab04	Set STM32F1 TEMP_TIMER_FREQUENCY to 1K Responding to https://github.com/MarlinFirmware/Marlin/pull/8833#issuecomment-379426803	vor 7 Jahren
Scott Lahteine	9ff4e9e1e6	Patch _IS_HW_SPI so defined() works	vor 7 Jahren
Lenbok	0e8242180d	Chamber temperature monitoring and auto fan control. This is an initial cut for feedback, updated for 2.0.x. Chamber temperature is currently reported along with hot end and bed temperatures to serial. The format is just like that used for hot end and bed temperatures, but using 'C' prefix. As there is no heater, target is always 0. Is this appropriate, is there a better way to report chamber temperatures? Chamber temperatures are not reported on the LCD in any way. When auto chamber fan is enabled, it currently just uses the same temperature threshold as the other auto controlled fans. As the chamber temperature is not connected to any heater, it doesn't undergo mintemp/maxtemp monitoring. This would need to change in the future if chamber heating became a feature.	vor 7 Jahren
Bob-the-Kuhn	acda4ecb20	Fix DUE Trinamic SW/HW SPI sanity check (#10336)	vor 7 Jahren
Bob-the-Kuhn	ab715c70d1	TMC SPI sanity-check and pins debugging (#10324)	vor 7 Jahren
Bob-the-Kuhn	902c885782	Switch to TMC2130 compatible hardware SPI & misc (#10299)	vor 7 Jahren
Scott Lahteine	93305a2d5e	Fix some spellings	vor 7 Jahren
Scott Lahteine	889fd5f71f	Backtrace minor cleanup	vor 7 Jahren
Alexey Shvetsov	cbdc78ec0f	Fix STM32 compilation with PlatformIO (#10245)	vor 7 Jahren
Eduardo José Tagle	749f19e502	[2.0.x] Move backtrace to a shared location (#10237) - And implement the `backtrace()` function call	vor 7 Jahren
xC0000005	7dc256432f	Restore STM32F1 series to working order. (#10229) The `_O2` attribute is no longer needed on the malyanlcd function, and the macros have broken timer numbers - reset this to a function to return the right device. Also fix the bit order cast in SPI.	vor 7 Jahren
etagle	8934a2c49b	Added some missing Thumb instructions to the traceback follower, so now it is able to traceback through switch() statements	vor 7 Jahren
etagle	328edea03a	Several fixes to the backtracer. Tested ant it works	vor 7 Jahren
ejtagle	9a24c0ae3f	Tons of fixes to the backtracker code, and also added an extra backtracker that does not require unwind tables to work and it is used if unwind tables are absent	vor 7 Jahren
Bob-the-Kuhn	509227fd80	change to mode 0	vor 7 Jahren
etagle	c3b23974bd	Added detection of case when no unwind tables are available	vor 7 Jahren
etagle	b210bdf032	Now the Crash reporter uses the configured BAUDRATE to send the report through the Programming port. And also shows the traceback of functions as discussed. For that latest feature to work, you need to compile the project with -funwind-tables and -mpoke-function-name compiler flags	vor 7 Jahren
etagle	c5730cf711	As Bob-The-Khun suggested, resetting the USB peripheral solves the huge startup delays that happen when a WDT reset happens and we are connected through the native port	vor 7 Jahren
Eduardo José Tagle	97e8a6ebd9	Various fixes for DUE... (#10152) - Watchdog reset during SD Card initialization. - Move `DebugMonitor` to `DebugMonitor_Due.cpp`. - Since the watchdog is enabled on boot do extra resets during init. - Have `thermalManager` do watchdog reset before its ISR starts to prevent reset. - Ensure that timers are stopped before reprogramming them to address tone issues. - Improve SAM3XE reset when reflashed through the native port.	vor 7 Jahren
Bob-the-Kuhn	785dbfc72d	[2.0.x] FASTIO consistency (#10164)	vor 7 Jahren

Erste Vorherige 1 2 3 4 5 ... Nächste Letzte

289 Commits (40d7e12827646ca7f6e2a8853f45e5f6274e2c80)