marlin

Commit Graph

作者	SHA1	備註	提交日期
Scott Lahteine	4f2ff46ab9	Move HAS_DIGIPOTSS to conditionals	9 年之前
Scott Lahteine	05da02f0a2	Implement MIXING_EXTRUDER and SWITCHING_EXTRUDER	9 年之前
Indrek Ardel	ecb23c1b65	Add Cartesio CN Controls V11 board	9 年之前
Scott Lahteine	4b4a582c4f	X_DUAL_STEPPER_DRIVERS implementation	9 年之前
Anthony Birkett	a0b00d29e3	Add a ported example configuration for the Velleman K8400 (Vertex) printer. Supports both dual and single head printers (with the correct config). Includes community sourced feed rate fix. Rename / move files. Remove redundant definitions.	9 年之前
Scott Lahteine	593c8bf286	Support for Rigidbot V2	9 年之前
Scott Lahteine	4d2cb70152	Cartesio UI Support	9 年之前
Scott Lahteine	cd441ce652	SINGLENOZZLE: EXTRUDERS versus HOTENDS	9 年之前
Scott Lahteine	07c9a11c3c	Automatically set X2 stepper pins	9 年之前
esenapaj	888443ca1e	Enclose all #error strings with apostrophes	9 年之前
Scott Lahteine	5ca6334fd2	Cleanup pins files, fixup analogtodigitalpin, etc.	9 年之前
Scott Lahteine	5b7a6c217a	Include more fans in sensitive pins list	9 年之前
Scott Lahteine	e5771346a4	Drop DISABLE_M(IN\|AX)_ENDSTOPS, replace with individual endstop flags	9 年之前
João Brázio	55a248d6b4	Fixes #3313 : Wrong board def in pins.h	9 年之前
Scott Lahteine	1da9d10173	Support for MKS v1.3/1.4 and Sainsmart RAMPS 1.4 variants	9 年之前
Scott Lahteine	0da744b7b0	Further cleanup of comments, partial Doxygen-style Following up on #3231	9 年之前
jbrazio	5e5d250832	Added gplv3 header to all Marlin files	9 年之前
AnHardt	1b336971ae	Fix lost undef Y_MAX_PIN in pins.h	9 年之前
Stephanie	6843b78f99	Add support for Printrboard RevF The PrintrBoard Rev F utilizes a mcp4728 DAC to set motor current. Printrbot's implementation utilizes 2 new M-codes to set and write the DAC settings to the DAC EEPROM: `M909` (Read DAC) and `M910` (Write DAC). `M907` is re-used to set value, `M908` for direct control. The Pins file for the RevF board is included.	9 年之前
Scott Lahteine	eafbc5e0cc	Add AJ4P pins and fix RAMBO pins	9 年之前
Scott Lahteine	50e3482e0a	Handle RAMPS 1.3 as the special case	9 年之前
Scott Lahteine	6a21180bd4	Implemented BQ ZUM Mega 3D board layout as an override to RAMPS 1.3	9 年之前
jbrazio	b82d91eca6	Added configuration example for the BQ Hephestos 2 3D printer. Added support for BQ ZUM Mega 3D board and stock Hephestos 2 thermistor.	9 年之前
Scott Lahteine	68457ee903	For Dual Y/Z use the next available extruder pins	9 年之前
AnHardt	8da2e98985	Split RAMPS 1.3 an 1.4 (PR#2741) because of hardware differences on the SERVO0_PIN	9 年之前
Scott Lahteine	0c7f7ebcfb	Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting	9 年之前
Scott Lahteine	a4c78ae786	Add E1 pins to SENSITIVE_PINS for Dual Y or Dual Z	10 年之前
Scott Lahteine	34e0a8d848	Move Y2 and Z2 pins defines to pins.h	10 年之前
AnHardt	e2d69f66b2	Make Z_PROBE a Z_MIN_PROBE (PR#65) Currently we use the probe exclusively as a device to find the build platform(bed). For the currently supported setups this means, we use it as a additional min-endstop. A triggered when not deployed probe disturbs the homing process for max-endstops. Rename ENDSTOPPULLUP_ZPROBE to ENDSTOPPULLUP_ZMIN_PROBE Rename Z_PROBE_ENDSTOP_INVERTING to Z_MIN_PROBE_ENDSTOP_INVERTING Rename Z_PROBE_ENDSTOP to Z_MIN_PROBE_ENDSTOP Rename DISABLE_Z_PROBE_ENDSTOP to DISABLE_Z_MIN_PROBE_ENDSTOP Rename Z_PROBE_REPEATABILITY_TEST to Z_MIN_PROBE_REPEATABILITY_TEST Rename Z_PROBE_ENDSTOP to Z_MIN_PROBE_ENDSTOP Adjust comments accordingly Remove Z_MAX check for the probe in update_endstops(). Using an delta related idea of @clefranc from #61, extended to the general change for all setups. Tested with Prusa i3, max-z-endstop and permanently triggered z-probe. Worked for @clefranc's delta.	10 年之前
Scott Lahteine	c0d7ea3e7e	Overridable Options - Part 4 (PR#2556) Apply `ENABLED` / `DISABLED` / `HAS_SERVOS` macros to pins files.	10 年之前
AndySze	eef595aa64	add makerlab mega controller pin configs	10 年之前
Scott Lahteine	f068e46661	RigidBoard include for pins.h	10 年之前
AnHardt	c461975140	Rename and repair MELZI_1284 (PR#2301) to MELZI_MAKR3D. Fix for #2288 As the normal MELZI also can have a 1284.	10 年之前
Scott Lahteine	318318b02f	Add pins_RAMPS_13_EFB.h to reduce redundancy	10 年之前
Scott Lahteine	346c8b339b	Remove a test from pins_RAMPS_13.h - Add 3 new lines to `pins.h` to remove 2 redundant tests in `pins_RAMPS_13.h`	10 年之前
AnHardt	b93cddfcc9	Add lost MKS_BASE to pins.h (PR#2297)	10 年之前
atfield90	c4a2e5ac23	Renamed Pins_megatronics_1 to Pins_minitronics	10 年之前
tonokip	10733a2bb0	added minirambo pin definitions. V2	10 年之前
Scott Lahteine	9d1961ebe3	Witbox and Hephestos are just RAMPS_13_EFB	10 年之前
AnHardt	4d4fa3607b	Remove Duemilanove No way to fit Marlin into 32K.	10 年之前
Scott Lahteine	f73f4ce555	Make some z probe and servo code tweaks	10 年之前
Chris Petersen	ffaf1b4f22	Add pin configuration for Brainwave Pro Copied from jcrocholl's contributions to the OpenBeamUSA Marlin fork	10 年之前
Richard Miles	4c3736ed43	Feature: Add RAMPS CNC Controller Board Created a new board to make using RAMPS as a CNC machine controller easier. It maps pin 8 to the spindle and pin 9 to the controller fan.	10 年之前
Scott Lahteine	2d099a2c70	Fix missing backslash in macro	10 年之前
Scott Lahteine	c065da52ec	Spacing and spelling	10 年之前
Chris Roadfeldt	2966ae2022	Fix Z_PROBE_PING not declared, allows code to compile if Z_PROBE_ENDSTOP is not used.	10 年之前
Chris Roadfeldt	8b81f20c61	Filling in more places where Z_PROBE_PIN and Z_PROBE_AND_ENDSTOP need to be. Added Sanity Check for it. Added hook so it's enabled.	10 年之前
Chris Roadfeldt	9f3ff14008	Enabled separate Z Probe and Z Axis endstop use at same time. Typo fixes in comments in existing code.	10 年之前
Scott Lahteine	ba871e46bf	Fix compiler warnings - Patched up for most included configurations	10 年之前
Scott Lahteine	19d418cd6a	Fix up the code to eliminate warnings	10 年之前

首頁上一頁 1 2 3 4 5 下一頁末頁

244 次程式碼提交 (46c33f1cfa6d8f97a5ff4d38cad013821aab46e8)