marlin

Commit graph

Autor	SHA1	Nachricht	Datum
Scott Lahteine	c36226c4dc	Fix homing Z position Add `sync_plan_position()` after `axis_is_at_home(axis)` to keep the planner position in sync when homing.	vor 10 Jahren
Scott Lahteine	ff178d8cf7	Change M421 to take coordinates This makes `M421` more amenable for irregular matrices	vor 10 Jahren
Bernardo	ff67ee73fc	Update Marlin_main.cpp Corrected "servo.h" to "Servo.h" because of the updated filename.	vor 10 Jahren
Steve Kelly	98ca46006c	Allow Y to home before X with option in Configuration_adv.h. This addresses comments in #1956 and #1079. In particular, this is useful when both endstops are stationary on a CoreXY system, and the Y axis needs to be homed before the X so the flags are aligned.	vor 10 Jahren
Scott Lahteine	0fca084ea6	Make EEPROM reproducible in GCode With these changes the output of `M503 S0` is all you need to restore the EEPROM. Building on this it is straightforward to save and restore the EEPROM state using the SD card or external GCode file. - Added `M145` to set “heatup states” for the LCD menu - Added `M420` to toggle Mesh Bed Leveling - Added `M421` to set a single Mesh coordinate - Extended `Config_PrintSettings` with added M codes - Cleaned up some comments here and there	vor 10 Jahren
Scott Lahteine	d43cc2dd5f	M111 - Debug Level - Add `M111` as a standard option to set the debug level - Implement `DEBUG_ECHO` in `process_commands` - Other debug levels (e.g., `DEBUG_DRYRUN`) need more work	vor 10 Jahren
Scott Lahteine	a22a228bcc	Rename files to move them in the IDE	vor 10 Jahren
Scott Lahteine	182f2cda35	Minor cleanup of M48	vor 10 Jahren
Scott Lahteine	56ff46eb8b	Improve code_has_value test	vor 10 Jahren
Scott Lahteine	ce142afdda	G4 shows status message only if no message is set already - Address issue raised in #1961	vor 10 Jahren
Scott Lahteine	35e79d56a5	Remove set-coordinate extension of G28	vor 10 Jahren
AnHardt	0fed46360c	Add variant for MAX6675 in M104 Else will throw error: @:0 B@:0 Error:No thermistors - no temperature [ERROR] Error:No thermistors - no temperature when no bed is defined	vor 10 Jahren
Scott Lahteine	0165560333	Apply zprobe_zoffset in axis_is_at_home Ensure the probe offset will always be included when homing Z.	vor 10 Jahren
Scott Lahteine	2558c10c6c	Use the slower feedrate for XY axes	vor 10 Jahren
Scott Lahteine	64268f3312	Fixup axis_is_at_home a little	vor 10 Jahren
Scott Lahteine	996d0a9185	Squish the code down a little	vor 10 Jahren
Scott Lahteine	8534bc376c	Fix homing of YZ with DUAL_X_CARRIAGE	vor 10 Jahren
Wurstnase	be9e4ceddc	fix typo c'n'p ftw :/	vor 10 Jahren
unknown	c26d816839	filter any 0	vor 10 Jahren
Wurstnase	61ae43f35e	v <-> code_value	vor 10 Jahren
Wurstnase	da0d91a79b	max endstopp no user will home to 0 with a max endstopp	vor 10 Jahren
AnHardt	064f2b37d0	More Beeper clean up. Centralised beep code to lcd_buzz(). From gcode_M300() and lcd_quick_feedback(). Enforced max. duration for M300 to 5 seconds. Corrected description in 'Configuration.h' LCD_FEEDBACK_FREQUENCY_HZ 0 gives now a silent delay of LCD_FEEDBACK_FREQUENCY_DURATION_MS.	vor 10 Jahren
Wurstnase	92575cecca	new timout/add adv_ok	vor 10 Jahren
AnHardt	671aaf2dc9	Minor fix for M300 Corrected wrong order of parameters.	vor 10 Jahren
Scott Lahteine	d931220a65	Tweak comments	vor 10 Jahren
Scott Lahteine	47847765e2	Add M410 QuickStop command	vor 10 Jahren
Wurstnase	b09a957fce	make 'wait' optional and mark as workaround	vor 10 Jahren
Scott Lahteine	58d128b7a9	Apply zprobe_zoffset in axis_is_at_home Ensure the probe offset will always be included when homing Z.	vor 10 Jahren
Scott Lahteine	63b98b8280	Raise Z for M401 and M402	vor 10 Jahren
wurstnase	d69da22f7c	last_command_time inside get_command()	vor 10 Jahren
wurstnase	574e2d856e	remove config	vor 10 Jahren
paclema	cde5eee2a5	Removed unnecessary comments	vor 10 Jahren
paclema	e1b69db6d1	Fixed M48 mismatch between n and P parameter on documentation	vor 10 Jahren
Scott Lahteine	e0e68c5cbc	Rename servos[] array in Marlin to servo[]	vor 10 Jahren
Scott Lahteine	642f6a92bc	fix type of code_has_value	vor 10 Jahren
Scott Lahteine	17ad80c1e1	Spacing in XYZ_CONSTS	vor 10 Jahren
Scott Lahteine	09d60e0128	Naming and code comments	vor 10 Jahren
Mehmet Sutas	5a9e45cc4a	Fix Syntax Error Filament Runout Statement	vor 10 Jahren
Scott Lahteine	ccddc280be	Apply three more commits	vor 10 Jahren
Scott Lahteine	ac2b23f574	Homing fixes - Prevent `Z_SAFE_HOMING` from homing Z twice in some cases - Allow `G28` with XYZ values of 0 to explicitly set the position - Don’t add `home_offset` when setting XYZ explicitly in `G28` - Add `code_has_value` function to check for the presence of a numeric value (could just test for space or nul to allow other types of values)	vor 10 Jahren
Scott Lahteine	5fe382949b	Some G-Codes comment cleanup	vor 10 Jahren
Scott Lahteine	8b16ebe705	Break out prevent_dangerous_extrude feature - It’s inline here, but could be a macro and duplicated for `planner.cpp`	vor 10 Jahren
Scott Lahteine	9189cc66ab	Fix moves for DELTA for MANUAL_BED_LEVELING - Use `line_to_current` in place of `plan_buffer_line`	vor 10 Jahren
Scott Lahteine	1269c445ab	Catch dangerous extrude before trying several	vor 10 Jahren
AnHardt	540dbb35e2	And an other MSG_BED in Marlin_main.cpp	vor 10 Jahren
AnHardt	14d4419e16	Replaced SERIAL_PROTOCOLPGM(MSG_BED) with SERIAL_PROTOCOLPGM("Bed") Resolved some warnings in Marlin_main.cpp regarding compares of signed and unsigned integers by replacing 'int' or 'uint16_t' with 'uint8_t'.	vor 10 Jahren
AnHardt	6a514f3dc9	Aplied HAS_LCD_CONTRAST also to Marlin_main.cpp and cleaned typo.	vor 10 Jahren
Scott Lahteine	3162971cd6	current_position not static	vor 10 Jahren
Scott Lahteine	27cb90da8b	IsStopped / IsRunning inline	vor 10 Jahren
Scott Lahteine	f7c4e7e19f	Fix G29 not deploying in some instances	vor 10 Jahren

Erste Vorherige ... 11 12 13 14 15 Nächste Letzte

731 Commits (4ca8f4a9a7fe3a11dc20e149c5c74bec4150d891)