1. Marlin welcome screen
2. Status screen symbols 3 Extruders, heated bed, animated fan logo 1
3. Status screen symbols 3 Extruders, heated bed, animated fan logo 2

Sorry for that. This does not lead to compile errors. I removed the
unwanted code to make it clean.

Fix step rate bug (especially for retraction)

These definition contain also the definition for the graphics LCD.

Definition for the graphic LCD are already in it, they will not harm the
configuration as they are only defined constants

Fix step rate bug (especially for retraction)

Generated with createTemperatureLookup.py. The old table crapped out at
270C, which was a problem for polycarbonate.

The motherboard 35 is a config without bed with this pins setting :
D8 Extruder
D9 Fan
D10 Controller Fan

Disable the high current output and wait a little before to turn off,
because the interrupting capacity of the PSU is unknown.
Could be a function if needed by other.

From the prepare menu, accessible when is not printing, you have the
possibility to turn off the PSU when is on et vice versa.
From the host, you can turn off or turn on the PSU then the menu is
updated accordingly.
From the LCD message, the printer status is reported ready or off
respectively when the PSU is on or off.

This change also handles the case where the pause/stop/restart button on
the VIKI is not used. Make LCD I2C buzz sound the same as the normal
buzz (300ms is too long for quick feedback).

These definition contain also the definition for the graphics LCD.

Definition for the graphic LCD are already in it, they will not harm the
configuration as they are only defined constants

This change allows fan outputs to automatically turn on/off when the
associated nozzle temperature of an extruder is above/below a threshold
temperature.
Multiple extruders can be assigned to the same pin in which case the fan
will turn on when any selected extruder is above the threshold.
It also makes the M42 command compatible with the M106/M107 command.
The majority of the logic in this change will be evaluated by the
compiler at build time (i.e, low code space requirements).

Refactor configuration to try to make items clearer (what defines a
panel vs what is user changeable).

Also fix compile time check in Marlin.pde

This includes refactoring the buttons code to remove a large amount of
non-pin dependent duplication from pins.h.

Removed incorrect LiquidCrystal_I2C Library

Update Polish language 	#define MSG_RESUMING "Wznawiam drukowanie"

Fix to a bug that I just introduced - sorry. Forgot about offset of string length.

Add SD-Card change and SD-Card init. for reprap electronics without
SD-Chard change detect pin.

Use all available characters in narrow LCDs < 20 characters.

Fix to a minor bug with hardcoded LCD_WIDTH that draws edited values outside of the 16 characters width LCDs.

The extruder offset can be specified in the configuration
file or adjusted on the fly using the "M218 T# X# Y#" command.
The EEPROM support is not yet merged in.
The "T#" command can take option "F#" that specifies the feedrate
at which the printing head should be re-positioned. If not
specified the re-positioning move is not preformed immediately,
but the coordinates are adjusted for the printer to properly
position the head when the next movement happens.

This reverts commit 01541ee64c.