marlin

Commit Graph

Автор	SHA1	Съобщение	Дата
João Brázio	19fb04d761	Update bq Hephestos 2 config	преди 9 години
Scott Lahteine	40cd20a236	Fix comments on EXPERIMENTAL_I2CBUS	преди 9 години
Scott Lahteine	eab44b30d4	Safety and serial sections	преди 9 години
esenapaj	741cda0e47	Follow-up the PR #3676(Advance extrusion algorithm – LIN_ADVANCE) ・Update forgotten example configurations	преди 9 години
João Brázio	8ccd97e7cc	Updated all example configuration files	преди 9 години
Scott Lahteine	cd441ce652	SINGLENOZZLE: EXTRUDERS versus HOTENDS	преди 9 години
Edward Patel	06593833ff	MBL: Move border macros to Configuration_adv.h	преди 9 години
Scott Lahteine	8218558953	Update comments, rename next_ping_ms, followup to #3797	преди 9 години
Scott Lahteine	07c9a11c3c	Automatically set X2 stepper pins	преди 9 години
Scott Lahteine	ddac17a195	Add BEZIER_CURVE_SUPPORT (G5 XYZEFIJPQ)	преди 9 години
Scott Lahteine	9f6b8f7d5b	Remove extra @section directive from configs	преди 9 години
AnHardt	b74af78736	Make arc support (G2/G3) configurable Saves about 2669 bytes when deactivated. (About 1% for a AT2560, about __4%__ for a AT644!)	преди 9 години
Scott Lahteine	fbf69081b4	Updated comment for THERMAL_PROTECTION_BED	преди 9 години
gralco	908229dbb3	Introduce temp watch protection for the bed When setting the bed temp via M140/M190 if the thermistor does not read an increase of WATCH_BED_TEMP_INCREASE degrees by WATCH_BED_TEMP_PERIOD seconds then it will throw "Error:Heating failed, system stopped! Heater_ID: bed" and call the kill() function. Conflicts: Marlin/Configuration_adv.h	преди 9 години
jbrazio	dd3a06a95a	Implemented M155 and M156, a generic TWI/I2C interface for Marlin	преди 9 години
Scott Lahteine	868eebfdee	Simplify configuration of Z2 endstops	преди 9 години
Scott Lahteine	3b2d159abd	Relax the test for "Heating failed" errors	преди 9 години
Scott Lahteine	53cc6cca46	Formalize some dependencies on PIDTEMPBED	преди 9 години
Scott Lahteine	e08915a723	Fix comments in Configuration_adv.h	преди 9 години
Scott Lahteine	0da744b7b0	Further cleanup of comments, partial Doxygen-style Following up on #3231	преди 9 години
jbrazio	5e5d250832	Added gplv3 header to all Marlin files	преди 9 години
jbrazio	04e57e2b5e	Update the Hephestos 2 default config	преди 9 години
Blue-Marlin	3166aed087	Improve the descriptions for THERMAL_PROTECTION	преди 9 години
Scott Lahteine	e5fd43f343	Implement BABYSTEPPING for COREXY and COREXZ	преди 9 години
esenapaj2	236a44c83b	follow-up the PR #3131 follow-up the commit 7326d63ce0 update Configration_adv.h of Hephestos2 delete unnecessary spaces	преди 9 години
esenapaj2	29e09c7c3e	update example configurations update old comments update or delete deprecated definitions complement forgotten updates adjust spacing some cosmetic changes	преди 9 години
Scott Lahteine	6165fd41a5	Fix Hephestos 2 and other configs	преди 9 години
jbrazio	45dc8a51f3	Added readme file for bqh2 and disabled the SLOWDOWN config flag	преди 9 години
jbrazio	b82d91eca6	Added configuration example for the BQ Hephestos 2 3D printer. Added support for BQ ZUM Mega 3D board and stock Hephestos 2 thermistor.	преди 9 години
Scott Lahteine	772460a7b8	Various minor spelling corrections Redo of #2939 rebased against RCBugFix	преди 9 години
Marc Urben	68eae2b5a8	added kossel xl example configuration	преди 9 години
Scott Lahteine	1093c780c8	Remove obsolete STEPS_MM_E setting	преди 9 години
Scott Lahteine	fbfbc5e330	Enable USE_WATCHDOG by default	преди 9 години
Richard Wackerbarth	0cebe85e65	Clean up spacing and duplicate entries • Removing trailing whitespace • Adjusting indention for better readability • Removing duplicated entries	преди 9 години
AnHardt	c956b52c4a	Babystep Multiplier Analog to https://github.com/MarlinFirmware/MarlinDev/pull/250 by @RicardoGA Restore the Babystep Multiplicator functionality and now it's available for X/Y/Z	преди 9 години
Richard Wackerbarth	e01f5e1ef7	Cleanup	преди 10 години
Scott Lahteine	bc50db9cf6	Implement PID_ADD_EXTRUSION_RATE	преди 10 години
Scott Lahteine	28599c51c7	Wrap Dual Y options in a conditional	преди 10 години
Scott Lahteine	11a065c0ca	Remove Z2 pins overrides from Configuration_adv.h	преди 10 години
wurstnase	f3ab1dba54	Z babystepping for coreXY (PR#47) only X and Y were not implemented	преди 10 години
Scott Lahteine	270c766de2	SDCARDDETECT -> SD_DETECT, added docs - `SD_DETECT_PIN` replaces `SDCARDDETECT` - `SD_DETECT_INVERTED` replaces `SDCARDDETECTINVERTED` - Revise the description of `SD_DETECT_INVERTED` - Add a note about the override of `SD_DETECT_INVERTED` in `Conditionals.h`	преди 10 години
Scott Lahteine	37d1879386	Apply overridables to Configuration files	преди 10 години
Scott Lahteine	ab6f1fdf8b	Move & document ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED (PR#2528) As suggested in #2521 - Move `ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED` because `SDSUPPORT` is also required. - Add a note that endstops must be enabled for the feature to have any effect	преди 10 години
wurstnase	c85a486445	make the dual z-endstop optional (PR#2277) it's disabled by default	преди 10 години
CONSULitAS	3a5963c0e7	Configuration_adv.h: Add FAN_MIN_PWM for slow fan stopping issue … * all Configuration_adv.h: Add #define FAN_MIN_PWM for slow fan stopping issue * for K8200: uncommented with tested (and working) values	преди 10 години
paclema	8d295547be	* Auto filament change on CHANGEFILAMENT feature. Now you can activate this option that extrude filament until you press the button.	преди 10 години
Ed Boston	bc205c76a3	SDCARDDETECTINVERTED problems Fixed an error where SDCARDDETECTINVERTED was being defined/undefined improperly	преди 10 години
Christian Bohn	258bcdefe0	move dogm font selection to configuration_adv.h	преди 10 години
AnHardt	7750180c93	transpire -> expire Minor wording correction.	преди 10 години
Scott Lahteine	0f2c9bacfd	M33 LONG_FILENAME_HOST_SUPPORT	преди 10 години

30 Ревизии (550c03a5a9262c05299c70332c92b2eb48a7d0cb)