marlin

Commit grafiek

Auteur	SHA1	Bericht	Datum
Scott Lahteine	9e07df5c1b	Extra options for LEVEL_BED_CORNERS (#10483)	7 jaren geleden
Scott Lahteine	11ab017dd0	Creality3D Power-Loss Recovery	7 jaren geleden
Scott Lahteine	594d6f9efd	Add POWER_LOSS_RECOVERY to example configs	7 jaren geleden
Scott Lahteine	a90cbc6339	[2.0.x] Wait for bed heaters between probing (#10472)	7 jaren geleden
Scott Lahteine	6faa93d787	Add G29_RETRY_AND_RECOVER to example configs	7 jaren geleden
Marcio Teixeira	5cc7916e69	Add G29_RETRY_AND_RECOVER feature - Add an option to retry G29, optionally executing a G-code procedure after each failed probe.	7 jaren geleden
Scott Lahteine	4f184ba5da	[2.0.x] Add BOARD_MKS_BASE_15 with digital micro-stepping (#10454) * Add BOARD_MKS_BASE_15 with digital micro-stepping * Rename MKS_13 to MKS_GEN_13	7 jaren geleden
Karl Andersson	428c54f2ad	[2.0.x] HAL for STM32F4 (#10434)	7 jaren geleden
KangDroid	6c535081ec	[2.0.x] Add optional menu item to toggle software endstops (#10389)	7 jaren geleden
Luc Van Daele	12785583d0	[2.0.x] G33 MIN_STEPS_PER_SEGMENT (#10386)	7 jaren geleden
Yunhui Fu	c96412a78f	[2.0.x] UTF-8 language translation support (#10213)	7 jaren geleden
Luc Van Daele	646aa20b43	Overhaul of G33 Delta Calibration (#8822)	7 jaren geleden
Sean	2d9b0a66fe	Add Filament Change accelerations	7 jaren geleden
Scott Lahteine	71d3523254	Add Filament Change accelerations to example configs	7 jaren geleden
Scott Lahteine	8b8ad14178	Add Z_PROBE_LOW_POINT to prevent damage	7 jaren geleden
Scott Lahteine	82dafbba33	Add Z_PROBE_LOW_POINT to example configs	7 jaren geleden
Roxy-3D	a731a723e8	Better i3-2020 Z_PROBE_OFFSET_FROM_EXTRUDER	7 jaren geleden
Scott Lahteine	dca69efc11	Update Bed PID comments	7 jaren geleden
Scott Lahteine	cec6e19099	Add RepRapPro Huxley configuration Based on #10343 by @indazoo	7 jaren geleden
Scott Lahteine	5932df7ea1	Add BEZIER_JERK_CONTROL to example configs	7 jaren geleden
Scott Lahteine	5b3bda1c16	Add Chamber Temp options to example configs	7 jaren geleden
Scott Lahteine	e8e60263c8	Scale feedrate (mm/s to deg/s) for SCARA	7 jaren geleden
Scott Lahteine	d133ad61f3	Add continuous purge to example configs	7 jaren geleden
Scott Lahteine	656219d867	Add configs for Creality CR-8	7 jaren geleden
Scott Lahteine	adcb87f0db	Z Endstop Servo => Z Probe Servo	7 jaren geleden
Alexey Shvetsov	cbdc78ec0f	Fix STM32 compilation with PlatformIO (#10245)	7 jaren geleden
Scott Lahteine	4d533b9baa	Update bq Hephestos 2 probe offset From #10234 by @thopiekar	7 jaren geleden
Scott Lahteine	dd2949922b	Consolidate 3-point leveling point options	7 jaren geleden
Scott Lahteine	1d22609473	MIN_PROBE_EDGE replaces DELTA_PROBEABLE_RADIUS	7 jaren geleden
Scott Lahteine	c6ff39cc14	Spacing cleanup	7 jaren geleden
shaktee	63fc4a8521	BIBO2 default update and Cyclops config (#10108)	7 jaren geleden
Marcio Teixeira	c24dbcbfe1	When STATUS_EXPIRE_SECONDS is 0, hide the position. (#10081) Some users may prefer to hide the position updates on the `LIGHTWEIGHT_UI` altogether. This leads to an even less cluttered display (it also saves on SPI traffic and one byte of RAM).	7 jaren geleden
Scott Lahteine	e7570f3195	Improve TMC config organization, naming	7 jaren geleden
Scott Lahteine	14c03cb6f4	[2.0.x] Make MIN_PROBE_EDGE a general option (for electronic probes) (#10069) Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.	7 jaren geleden
Scott Lahteine	28f1276286	[2.0.x] Add Z_AFTER_PROBING option (#10058) Some "fix-mounted" probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.	7 jaren geleden
Bob-the-Kuhn	0d8c15c01f	restore PR 9661 files & V1 fix	7 jaren geleden
Bob-the-Kuhn	bf59a4a6df	Revert "[2.0.x] DUE compatibility with shared SPI LCDs, USB mass storage, add pin defs & update examples\MakerParts\Configuration.h"	7 jaren geleden
Scott Lahteine	79e6d890d5	Add UNKNOWN_Z_NO_RAISE to example configs	7 jaren geleden
Bob-the-Kuhn	914bb80bde	removed SDSS init added device & comm drivers for shared SPI LCDs mistyped some updates in ultralcd_impl_DOGM.h remove unwanted changes in onfiguration.h still can't type Update HAL_LCD_class_defines.h include USB mass storage & misc	7 jaren geleden
Bob-the-Kuhn	6b4a928145	2uS default step pulse (#9989)	7 jaren geleden
Scott Lahteine	94f5204629	Move AUTO_REPORT_SD_STATUS to SDSUPPORT block	7 jaren geleden
Scott Lahteine	a2a672449a	Updated boot screen description	7 jaren geleden
Scott Lahteine	91db7930dc	Drop SCARA_FEEDRATE_SCALING The updated planner takes the length of the move, so this pre-calculation is no longer needed.	7 jaren geleden
Scott Lahteine	cd7dc49527	Fix CR-10 status screen missing commas Fix #9660	7 jaren geleden
TheSFReader	eb079959fb	Report sd card progress [FR] #9751 (#9832) * SD Status auto-report feature Feature Request #9751	7 jaren geleden
Scott Lahteine	54c65fc3cb	Standardize LCD buzz defaults	7 jaren geleden
Scott Lahteine	4953fb1c88	Standardize encoder defaults	7 jaren geleden
Scott Lahteine	078627f805	[2.0.x] Creality Ender-4 configuration (#9803) * Move Creality Ender-2 configurations * Add Creality Ender-4 configurations	7 jaren geleden
Scott Lahteine	5684beae90	Bring some configs up to speed	7 jaren geleden
Roxy-3D	92c8efdc96	Change Folger Tech i3-2020 defaults	7 jaren geleden

Eerste Vorige ... 3 4 5 6 7 Volgende Laatste

310 Commits (5b49fccf80e0f17aa107262c649ba2777f8d5cc2)