marlin

Commit graph

Autor	SHA1	Nachricht	Datum
Scott Lahteine	4fbe818163	Add macros to move servos	vor 9 Jahren
Scott Lahteine	7fb69e24fb	Use "Tn S1" to change tools without moving	vor 9 Jahren
Scott Lahteine	b75e648f2c	Clarify names of prepare_move functions	vor 9 Jahren
Scott Lahteine	0e2bfd0769	Use linear feedrate in gcode_T, not volumetric	vor 9 Jahren
Scott Lahteine	6d62a4ffc8	Patch LIN_ADVANCE for style and forward-compatibility	vor 9 Jahren
Sebastianv650	fb8e880734	Add LIN_ADVANCE	vor 9 Jahren
João Brázio	5b5aa1572b	Non-blocking buzzer	vor 9 Jahren
Scott Lahteine	72c6f2923f	axis_steps_per_unit => axis_steps_per_mm	vor 9 Jahren
Scott Lahteine	cb4704e07a	Rename some planner acceleration vars - `per_sq_second` => `per_s2` - `per_sqr_second` => `per_s2` - `axis_steps_per_sqr_second` => `max_acceleration_steps_per_s2`	vor 9 Jahren
Scott Lahteine	4980ecc1f7	Smaller binary using inline gcode argument getters	vor 9 Jahren
Reid Rankin	16212432c9	G20/21 and M149 support, and code_value() refactor This is an update of MarlinDev PR #196. G20/21: support for switching input units between millimeters and inches. M149: support for changing input temperature units. In support of these changes, code_value() and code_value_short() are replaced with an array of functions which handle converting to the proper types and/or units.	vor 9 Jahren
Scott Lahteine	cca047424d	MBL: cel => cell	vor 9 Jahren
Scott Lahteine	d7e4e8e9be	Fix a typo in #3955	vor 9 Jahren
Scott Lahteine	c2362c1b3c	Apply Marlin coding standards to MBL class	vor 9 Jahren
Edward Patel	c06de0f097	MBL: Added keeping MBL active when homing single axises for #3750	vor 9 Jahren
Scott Lahteine	f2fb66c00d	With SINGLENOZZLE only set temperature for the active tool	vor 9 Jahren
Scott Lahteine	cd441ce652	SINGLENOZZLE: EXTRUDERS versus HOTENDS	vor 9 Jahren
MagoKimbra	f499be084a	Fix M428 width DELTA & SCARA	vor 9 Jahren
Scott Lahteine	664b299a51	This fix is not DELTA compatible	vor 9 Jahren
Scott Lahteine	064efb20e0	Also call clear_command_queue for lcd_sdcard_stop	vor 9 Jahren
Scott Lahteine	6277395e1e	set_current_position_from_planner() after stepper.quick_stop()	vor 9 Jahren
Scott Lahteine	381bc6f0b0	set_position => set_position_mm	vor 9 Jahren
Scott Lahteine	9eecb4404b	Make raise_z_after_probing null sometimes	vor 9 Jahren
Scott Lahteine	b3a37b493d	Patch G28 servo stow to use Conditionals, raise_z_after_probing	vor 9 Jahren
Scott Lahteine	efa7209acf	Improved LCD contrast handling Based on MarlinFirmware/MarlinDev#200 from @eboston	vor 9 Jahren
lrpirlet	3aefa04386	Raise the servo probe before stow outside ABL context	vor 9 Jahren
Scott Lahteine	d698c89971	Fix bad movement in gcode_T when switching	vor 9 Jahren
Scott Lahteine	bd97bbc52a	Make HAS_LCD_CONTRAST a boolean flag	vor 9 Jahren
Scott Lahteine	55ef04a566	Need to call dac_init() in setup() for DAC_STEPPER_CURRENT As reported by https://github.com/MarlinFirmware/Marlin/pull/3182#issuecomment-222595488	vor 9 Jahren
Scott Lahteine	360adc6a3b	Small reduction in M421 code	vor 9 Jahren
Scott Lahteine	a4ed988c60	Two index finding functions for MBL	vor 9 Jahren
AnHardt	f5a036510f	Extend M421 with I and J parameters Extend M421 with I and J parameters	vor 9 Jahren
Edward Patel	c7d90dc5ec	Add option to configure G28 all axis resting position for MBL	vor 9 Jahren
Scott Lahteine	8218558953	Update comments, rename next_ping_ms, followup to #3797	vor 9 Jahren
AnHardt	e761bdbb4b	Remove SF_ARC_FIX from G5 (Cubic B-spline) Remove SF_ARC_FIX from G5 (Cubic B-spline). SF_ARC_FIX is a fix for G2/G3 (arcs) where Skeinforge always produced relative instead of absolute coordinates for the endpoint of an arc. It's very unlikely this is also a problem with Cubic B-splines. More likely is copying from the G2/G3 code.	vor 9 Jahren
AnHardt	2207001333	No compromises for the manage_heater() No compromises for the manage_heater(). manage_heater() will return immediately when there is nothing to do, but needs a constant detaT to work proper. Calling idle() only every 200ms results in a display update every ~2 seconds - that should be enough. For the other functionalities in idle() and manage_inactivity() 200ms is a lot but hopefully works.	vor 9 Jahren
João Brázio	e6effb8f35	Implements S1 argument in M999	vor 9 Jahren
Scott Lahteine	4041508ffb	Function decl. in headers don't need "extern"	vor 9 Jahren
Scott Lahteine	a28970784c	XYZ unhomed	vor 9 Jahren
Scott Lahteine	a9926b71a4	Require homing of Z before G29	vor 9 Jahren
AnHardt	41e9569dbc	Minor DELTA segmentation speedup Minor DELTA segmentation speedup by pulling calculations out of the loop.	vor 9 Jahren
João Brázio	b6a3aef297	G29: Report final position back to host when using MBL	vor 9 Jahren
esenapaj	95f30529a6	Add stowing process for MECHANICAL_PROBE	vor 9 Jahren
esenapaj	e2b87f6c85	Separate Z_PROBE_ALLEN_KEY from MECHANICAL_PROBE	vor 9 Jahren
Scott Lahteine	754b0152f5	Fix MBL zigzag calls	vor 9 Jahren
Scott Lahteine	13175ce7da	Fix error checking in M421	vor 9 Jahren
João Brázio	8a18c52002	Adds an option to disable print job timer auto start	vor 9 Jahren
João Brázio	a79267217b	M78 now allows stats reset using the S78 argument	vor 9 Jahren
Scott Lahteine	ddac17a195	Add BEZIER_CURVE_SUPPORT (G5 XYZEFIJPQ)	vor 9 Jahren
AnHardt	8a4376d51f	Idle during long arcs Idle during long arcs to prevent from watchdog resets during high segmented fast arcs.	vor 9 Jahren

Erste Vorherige ... 26 27 28 29 30 ... Nächste Letzte

1578 Commits (5f5a55a0de6d2fc33d6935a3b765c43dbb78f15c)