marlin

Commit Graph

Author	SHA1	Message	Date
Bernhard	396270a0de	fix duplicated definition of MOSI MISO pins in case motherboard==33	13 years ago
Bernhard	11f2dafc4e	one step closer to a functional makefile..	13 years ago
Bernhard	8463e39a4a	starting with sanguino arduino 1.0 compatibility	13 years ago
Bernhard	2bc160a978	add wiring.h, that can be used to overwrite: arduino-0023/hardware/arduino/cores/arduino/wiring.h this is necessary if the avr libraries are recent, but arduino is old. Alternative: newer arduino	13 years ago
Bernhard	57f9359a41	simplified the includes, makefile now works with arduino23	13 years ago
Bernhard	3c1a4aac2b	header file simplification	13 years ago
Bernhard	212515148e	added m240 photography support. default off	13 years ago
Bernhard	6735025428	cooldown	13 years ago
Bernhard	415aadf704	lcd panel bed support advance and ultipanel not any more in default config	13 years ago
Bernhard	4bababf5b0	Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1	13 years ago
Bernhard	f312216e97	Revert "untestest commit, so I don't loose code.. features runout prevention addons" This reverts commit 651cde8b98.	13 years ago
Bernhard	651cde8b98	untestest commit, so I don't loose code.. features runout prevention addons	13 years ago
Erik van der Zalm	554cc1718d	Fiexed E_ENABLE_PIN errors	13 years ago
Erik van der Zalm	617968ab76	G92 fix	13 years ago
Erik van der Zalm	84d9cf7339	merging	13 years ago
Erik van der Zalm	e017228569	Merged multiple extruder support. Soft PWM. (Sanguinololu can also have PID temperature control) Interrupt save WRITE for addresses > 0x0FF	13 years ago
Bernhard	3320a5b37d	make autotemp compatile for use without pid	13 years ago
Bernhard	06411d5c9e	ultralcd can now also stop the wait loop for the hot-end m109 heating when stopping sd prints.	13 years ago
Bernhard	82c99625fa	instant stop of sd prints from the panel.	13 years ago
Bernhard	01001b89d2	repaired nozzle runout prevention to not collide with automatic stepper disabeling.	13 years ago
Bernhard	88ee053af0	heating up santity, formarly knows as "watchdog", but renamed due to the existance of the real watchdog, works now.	13 years ago
Bernhard	b1d84d879b	st_synchronize back to normal..	13 years ago
Bernhard Kubicek	f6fe7143e4	Merge pull request #29 from k-eex/Marlin_v1 Fix M201 not saving settings in all places, so the changes did not get written into EEPROM	13 years ago
Bernhard	dde4b40fa9	disable steppers in runout prevention	13 years ago
Bernhard	2bc5e7ec9e	prevent too long extrudes, or too cold extrudes	13 years ago
Bernhard	aa4f9a6474	better values.	13 years ago
Bernhard	87fd249c43	made runout prevention independent of tempeorarily set esteps	13 years ago
Bernhard	1ec0c3b68a	extruder runout prevention.	13 years ago
Bernhard	5b4625f79c	added a partial release option to "m84" aka "stepper release". If you do tiny layers, you might want to keep the z-axis powered to not loose height positioning after homeing.	13 years ago
Bernhard	cc4a9cdb69	added autostart procedure trigger to the ultralcd menu	13 years ago
Bernhard	61c943b4bf	fixed the st_synchronize. it would have continued if there is only the last move of the buffer being stepped.	13 years ago
Keegi	bae1e422f6	Fix M201 not saving settings in all places, so the changes did not get written into EEPROM	13 years ago
Bernhard	754d2d69b2	z homing sound fix, for now until the actual cause is found..	13 years ago
Bernhard	986f0ba76c	moved <stdio.h> to more dominant location.	13 years ago
Bernhard	460b788d78	repaired homing position setting.	13 years ago
Erik van der Zalm	3664ed6aad	Merge branch 'Marlin_v1' of https://github.com/dob71/Marlin into Marlin_v1	13 years ago
Erik van der Zalm	43f5c3e82b	Merge branch 'Marlin_v1', remote-tracking branch 'origin/Marlin_v1' into Marlin_v1	13 years ago
Denis B	4fd75dc813	Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4	13 years ago
Bernhard	12e8edcac3	Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1	13 years ago
Bernhard	cf50ba140f	added M503 to display eeprom storage, and renamed eeprom routings. This version is compatible with the qtmarlin eeprom-tab.	13 years ago
Erik van der Zalm	89e832c295	Update endstops only for homing. (use less resources when not used)	13 years ago
Erik van der Zalm	b99c49ec3b	Add option to only check endstop when homing	13 years ago
Erik van der Zalm	95a0b28acb	Merge branch 'Marlin_v1', remote-tracking branch 'origin/Marlin_v1' into Marlin_v1	13 years ago
Erik van der Zalm	af22e9cd38	Some advance modifications	13 years ago
Bernhard	7714b98da7	solved some compiler warnings that are now visible in arduino 1.0. Found a couple of unused variables, that I commented. Tried to solve the program memory warning message, and failed.	13 years ago
Bernhard	dfd240b260	overworked autotemp, removed one layer of nesting from the ultralcd.	13 years ago
Bernhard	4f909963e4	make QUICKHOME configureable	13 years ago
Erik van der Zalm	6b86f15686	More 2nd extruder implementation. (Not usable) Advance (not tested)	13 years ago
Bernhard	0bc9daa4f7	make it compile with arduino 1.0 ; function is still untested.	13 years ago
Bernhard	b0c3871750	more fixing of the sanguino math round problem	13 years ago

First Previous ... 335 336 337 338 339 ... Next Last

17008 Commits (62a595750dd0ba01c3acf03c1f6e495ed9f0f6cb) All Branches Search

17008 Commits (62a595750dd0ba01c3acf03c1f6e495ed9f0f6cb)

All Branches