marlin

Commit graph

Autor	SHA1	Nachricht	Datum
Jonathan Bastien-Filiatrault	d46d9d998e	Add maximum bed integral term in example configurations.	vor 10 Jahren
Richard Wackerbarth	b878bc5620	Introducing the Kossel Pro Build Configuration	vor 10 Jahren
Scott Lahteine	9d1961ebe3	Witbox and Hephestos are just RAMPS_13_EFB	vor 10 Jahren
Ed Boston	082ed3beed	Propagate Configuration.h changes Updated all the example Configuration.h files for the new display type.	vor 10 Jahren
Christian Bohn	258bcdefe0	move dogm font selection to configuration_adv.h	vor 10 Jahren
AnHardt	7750180c93	transpire -> expire Minor wording correction.	vor 10 Jahren
Scott Lahteine	0f2c9bacfd	M33 LONG_FILENAME_HOST_SUPPORT	vor 10 Jahren
Scott Lahteine	76438195f0	NO_TIMEOUTS and ADVANCED_OK off by default	vor 10 Jahren
Scott Lahteine	78beef2d73	Use Mendel default for INVERT_Y_DIR	vor 10 Jahren
Scott Lahteine	d693e0f378	Use WATCH_TEMP_INCREASE + TEMP_HYSTERESIS + 1 as difference limit	vor 10 Jahren
Scott Lahteine	b2bd9aae7c	SCARA_SEGMENTS_PER_SECOND	vor 10 Jahren
Scott Lahteine	429c6ccad2	Neaten config formatting	vor 10 Jahren
Wurstnase	526ad82d20	activate advanced_ok and no_timeout	vor 10 Jahren
Scott Lahteine	2445ae3d3a	Combine thermal runaway and watch-period - Make thermal protection for all hotends and/or bed into simple switches - Now enable `WATCH_TEMP_PERIOD` when `THERMAL_PROTECTION_HOTENDS` is enabled - Move detailed thermal parameters to `Configuration_adv.h` - Add sanity checks to warn about old configurations - Change `WATCH_TEMP_PERIOD` to seconds instead of milliseconds	vor 10 Jahren
Scott Lahteine	79106638a8	Fix documentation of heating sanity check	vor 10 Jahren
Scott Lahteine	6110494a56	Change default to 4°C in 16s	vor 10 Jahren
Scott Lahteine	54deb9eea3	Enable WATCH_TEMP_PERIOD by default	vor 10 Jahren
Scott Lahteine	deedb00c18	Document WATCH_TEMP_PERIOD	vor 10 Jahren
brupje	b425851441	Rename Configuration_megatronics.h to Configuration.h	vor 10 Jahren
brupje	d1148a0198	Rename Configuration_megatronics.h to Configuration.h	vor 10 Jahren
Scott Lahteine	181ccc884c	Edit thermal runaway description	vor 10 Jahren
brupje	b7fcb11580	Added example configuration for Megatronics	vor 10 Jahren
Brian Gilbert	1285784a49	Add Boots Industries V2.5 example configuration	vor 10 Jahren
paclema	aedd580911	Updated all configuration.h examples	vor 10 Jahren
AnHardt	514d8ac460	Enable TRP for the bed in all Configurations.	vor 10 Jahren
Scott Lahteine	2610b8d047	Enable thermal runaway protection by default	vor 10 Jahren
Scott Lahteine	0970102950	Remove obsolete STRING_URL	vor 10 Jahren
Scott Lahteine	5b248757c7	Level Bed in Prepare submenu - Add “Level Bed” menu item for auto bed leveling - Hide the option if homing has not been done yet - Arrange the Prepare submenu more logically (?) - Add documentation comments, some white-space - Apply some coding standards here and there - Move old encoder multiplier debug option to `ultralcd.cpp`	vor 10 Jahren
CONSULitAS	6af40e9dc0	K8200 example Configuration.h: STRING_URL removed K8200 example Configuration.h: * STRING_URL removed: like proposed by thinkyhead in #1917	vor 10 Jahren
Steve Kelly	98ca46006c	Allow Y to home before X with option in Configuration_adv.h. This addresses comments in #1956 and #1079. In particular, this is useful when both endstops are stationary on a CoreXY system, and the Y axis needs to be homed before the X so the flags are aligned.	vor 10 Jahren
AnHardt	6cba6bcd82	Add 'cn' to the other 'Configuration.h's	vor 10 Jahren
Scott Lahteine	0fca084ea6	Make EEPROM reproducible in GCode With these changes the output of `M503 S0` is all you need to restore the EEPROM. Building on this it is straightforward to save and restore the EEPROM state using the SD card or external GCode file. - Added `M145` to set “heatup states” for the LCD menu - Added `M420` to toggle Mesh Bed Leveling - Added `M421` to set a single Mesh coordinate - Extended `Config_PrintSettings` with added M codes - Cleaned up some comments here and there	vor 10 Jahren
Scott Lahteine	5c29fda167	Add a warning for DISABLE_[XYZ] options	vor 10 Jahren
AnHardt	064f2b37d0	More Beeper clean up. Centralised beep code to lcd_buzz(). From gcode_M300() and lcd_quick_feedback(). Enforced max. duration for M300 to 5 seconds. Corrected description in 'Configuration.h' LCD_FEEDBACK_FREQUENCY_HZ 0 gives now a silent delay of LCD_FEEDBACK_FREQUENCY_DURATION_MS.	vor 10 Jahren
Ivan Galvez Junquera	b99e63a7bf	Fixed compilation error "error: stray ‘\357’ in program" in several configuration files. Introduced in commit 697ee2dc and later spread to other files.	vor 10 Jahren
CONSULitAS	a40c274310	Example Configuration for K8200 back in sync example_configurations\K8200\Configuration.h: * merge upstream changes from default Configuration.h manually * add some machine specific comments	vor 10 Jahren
CONSULitAS	1de9b568db	Example Configuration for K8200: comments/URL/readme Example Configuration for K8200 : comments/URL/readme example_configurations\K8200\Configuration.h: * add machine specific header * change STRING_URL to K8200 fork (@thinkyhead: What do you think?) example_configurations\K8200\readme.md: * updated documentation * added URLs and links	vor 10 Jahren
CONSULitAS	0af5e3a04f	Example Configuration for K8200: comments/URL/readme Example Configuration for K8200 : comments/URL/readme example_configurations\K8200\Configuration.h: * add machine specific header * change STRING_URL to K8200 fork (@thinkyhead: What do you think?) example_configurations\K8200\readme.md: * updated documentation * added URLs and links	vor 10 Jahren
CONSULitAS	3851ac6226	Example Configuration for K8200 back in sync example_configurations\K8200\Configuration.h: * merge upstream changes from default Configuration.h manually * add some machine specific comments	vor 10 Jahren
Scott Lahteine	ccddc280be	Apply three more commits	vor 10 Jahren
Scott Lahteine	74e4b42f7e	Default MACHINE_NAME to "3D Printer"	vor 10 Jahren
Scott Lahteine	c6bb98abad	machine name for hephestos too	vor 10 Jahren
Scott Lahteine	ccbe2c4ea3	Apply CUSTOM_MACHINE_NAME to configurations - Replace “Mendel” with “RepRap”	vor 10 Jahren
AnHardt	56fc3a4835	bgr -> bg + update in documentation	vor 10 Jahren
Natealus	585eee6549	Z Probe inverting not present in example configs, causes error The line const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop is in the main configuration.h but wasn't present in the example configuration.h's. Causes a compiling error with Z Probe enabled. Just added it to all the configs. :)	vor 10 Jahren
AnHardt	c5961892e3	Bulgarian for all the Configuration.h's	vor 10 Jahren
Scott Lahteine	4788b59300	Thermistor values for configurator	vor 10 Jahren
Scott Lahteine	eb6e3886f4	Set version to "1.0.3 dev"	vor 10 Jahren
Edward Patel	a9ed39b12d	Moved checks into SanityCheck.h + removed previous added checks.	vor 10 Jahren
Scott Lahteine	7d2c2f1790	Updates for the configurator - Sections in all `Configuration_adv.h` - Recognize JAPANESE/WESTERN/CYRILLIC options - Better capturing of comments for tooltips	vor 10 Jahren

Erste Vorherige 1 2 3 4 Nächste Letzte

195 Commits (6f4873329e57db9df6f752dd7fd9de8db804594b)