marlin

Commit Graph

Автор	SHA1	Съобщение	Дата
Ian Jackson	71404eef29	.gitignore: Add ~, .orig, *.rej, move to root directory Move the .gitignore out of the Marlin subdirectory so it applies to the whole tree, and add some missing patterns. Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>	преди 12 години
Ian Jackson	a873541ef6	Marlin.pde: include comment for emacs mode Emacs by default doesn't recognise a ".pde" file as C++ source code. Add the annotation to the top of the file to make it work. Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>	преди 12 години
Chris Palmer	538189cc19	Fixed soft limits when the origin is in the middle. HOME_POS is now always where the endstop is and can be outside the limits. The limits are now defined by MIN_POS and MAX_POS rather than HOME_POS and MAX_LENGTH. The Z is axis now homed first if direction is away from the bed. Saguinololu limit pins change from MIN to MAX according to the homing direction.	преди 12 години
ErikZalm	686011a548	Fixed typo	преди 12 години
Erik van der Zalm	ea2c19f978	Added CoreXY support (Thanks Ilan Moyer)	преди 12 години
Erik van der Zalm	aa65fe22ed	decoupled axes sucessfully at least on pure x or y jog	преди 12 години
daid	12de8fff81	Support step motor controllers with active low step pins.	преди 12 години
Erik van der Zalm	b67dacdc8f	Fixed AD595 define	преди 12 години
Bernhard	d3002ef741	corrected retract	преди 12 години
Bernhard	0c123950e9	__ header file replace	преди 12 години
Bernhard	bf077125b9	added firmware retract. disabled by default	преди 12 години
Bernhard	0e5e249ab5	added individual pullup setting option to have finer control in case there is a special z-min sensor, for example	преди 12 години
Bernhard Kubicek	b7fc14bc65	repaired thermistortable_6 by graphcial fitting of the off-slope values. see issue 179. Erik, I know you asked for no changes, but this file probably is not related and hopefully allright.	преди 12 години
ErikZalm	9e1021efbe	Fixed SL bug.	преди 12 години
Daid	e9bec9b6fe	Fixed E1_ENABLE pin for Ultimaker. This was wrong for the 1.5.4 and 1.5.3 PCB (I cannot check the 1.5.6)	преди 12 години
linagee	fbd282b3ba	Update Marlin/Configuration.h	преди 12 години
linagee	2e8c5049c5	Update Marlin/thermistortables.h	преди 12 години
linagee	2d0d8e5272	Small correction.	преди 12 години
Daid	4d7fe7115f	Changed M401 to M0/M1 as suggested, so they match normal CNC stop commands.	преди 12 години
linagee	9e9db65c3f	Update Marlin/thermistortables.h	преди 12 години
linagee	bd966ef389	Update Marlin/thermistortables.h	преди 12 години
linagee	775da3f103	Added top ratings and extended to ADC=1 for table 3 and 5.	преди 12 години
linagee	96a4baa0be	Update Marlin/thermistortables.h	преди 12 години
linagee	2aa9f7b131	Update Marlin/thermistortables.h	преди 12 години
linagee	c4490f5f3d	Update Marlin/Configuration.h	преди 12 години
linagee	dd9144994e	Tested May 19 - It works! Verified with separate thermocouple TM-902C also.	преди 12 години
linagee	4c37d0d9f1	Extended range above 250C. (Operating range states up to 300C)	преди 12 години
Daid	b59724e42b	Add strigification for extruder amount in M115 report.	преди 12 години
Daid	16413bb8f2	Last M401 update, refresh the LCD during an M401 wait.	преди 12 години
Daid	b3941fce5c	Update after testing	преди 12 години
Daid	d494688565	Do not initialize in the header file.	преди 12 години
Daid	516ec90242	Add M401 - Wait for user on LCD button press	преди 12 години
linagee	de2ca3b2e8	Grammar correction.	преди 12 години
linagee	c2fc466e1b	Update Marlin/Configuration.h	преди 12 години
linagee	241f5a4c0e	Update Marlin/thermistortables.h	преди 12 години
linagee	9f9f498491	Update Marlin/Configuration.h	преди 12 години
Erik van der Zalm	e31bef31ad	Limit PID autotune PWM to PID_MAX	преди 12 години
Erik van der Zalm	ba96059203	add additional dropsegments test	преди 12 години
zittix	fbd91ab0b5	Fixes #153 for bad call to abs()	преди 12 години
MaikStohn	159ae90874	bug fix for scrolling of main menu when using SMALL_DISPLAY (2 lines only)	преди 12 години
MaikStohn	e48f5aa6a7	fixed typo	преди 12 години
MaikStohn	1efe9ab497	changed encoder pos from int to long to fix problems setting x/y/z/e stepps_per_mm using the lcd menu	преди 12 години
Guan Yang	602c8ee02b	Melzi support	преди 12 години
Daid	279d00da9f	Fixed #if for Ultimaker.	преди 12 години
Bernhard Kubicek	451f9cc6d1	Residual in the comments: there are no more mm/minutes but only mm/sec in the planner buffer.	преди 12 години
Erik de Bruijn	e3fe1f0d00	Made a more granular configuration possible PREVENT_LENGTHY_EXTRUDE. You can now decide to allow/disallow large length of extrusions to be executed. Turning off the protection might be beneficial to those who want to do fast and long reversals.	преди 12 години
Erik de Bruijn	d88205d89d	Suggestion to improve (TODO), no actual code changed	преди 12 години
Erik de Bruijn	5aa80e6c05	Made language.h more flexible. Automatically do the right defines based on MOTHERBOARD == 7 ? "Ultimaker" : "Mendel"	преди 12 години
MaikStohn	b657a18449	Revert "magic PROGMEM defines to avoid hundreds of wrong GCC warnings" This reverts commit 3682d9bd5b.	преди 12 години
MaikStohn	d188ae4c9d	added missing declaration of buttons_init() This is required when moving the buttons_init() function to the lcd_init() function	преди 12 години

Първа Предишна 1 2 3 4 5 ... Следваща Последна

426 Ревизии (71404eef293f1c93ba081a458120b45e5a48f566)