marlin

Commit graph

Autor	SHA1	Nachricht	Datum
GMagician	b96ceb4256	[1.1.x] tool change bad behaviours This PR will address two issues reported in #8492. Just one is left because I don't know if it is an issue or not 1) when no home is done ("no_move" is set) tool change should never move X & Y because... I don't know where I am...only Z should be adjusted to avoid bed collision if other nozzle is lower than current. 2) Since no move no bed level matrix should be applied When SWITCHING_NOZZLE is enabled and system is homed there are two movements to go to destination, but first can move Z to older position and then crash on the bed	vor 7 Jahren
Bob-the-Kuhn	9b80e1e04a	change to L for end pin for M43 Toggle command	vor 7 Jahren
Scott Lahteine	bf6a1816b4	Display volumetric ratio in terms of E mm	vor 7 Jahren
Scott Lahteine	4f05a66ee1	Fixes #8472	vor 7 Jahren
Scott Lahteine	622d100c30	No retroactive changes with M851 Z	vor 7 Jahren
Scott Lahteine	74997a5251	Fix comment in planner.h	vor 7 Jahren
Roxy-3D	50148f7185	Update the UBL Probable Area for Delta's This is a non-intuitive change. @oldmcg says in this post https://github.com/MarlinFirmware/Marlin/issues/7572#issuecomment-340641207 that using DELTA_PRINTABLE_RADIUS is better than DELTA_PROBABLE_RADIUS for setting the probe limits. This is because the automatic probe code checks all locations for being reachable by the probe prior to doing the probe.	vor 7 Jahren
Scott Lahteine	8f57a3e28a	Apply coding standards to Max7219 code	vor 7 Jahren
Scott Lahteine	2511e869e2	Update Configuration.h	vor 7 Jahren
Scott Lahteine	eb3bdb7550	Fix FILAMENT_LCD_DISPLAY, disabled state, optimize	vor 7 Jahren
Thomas Moore	97c19de8b9	Fix PlatformIO dependencies	vor 7 Jahren
Scott Lahteine	4e19c59ab3	Miscellaneous cleanup	vor 7 Jahren
Scott Lahteine	9cf5b96971	Fix M503 output for M145 Fixes #7978	vor 7 Jahren
Scott Lahteine	69a710fef1	Add OV() macro for thermistor tables	vor 7 Jahren
Scott Lahteine	a6ee4a0468	Apply SDCARD_SORT_ALPHA changes from 2.0.x	vor 7 Jahren
Scott Lahteine	d3b8f30818	Fix M32 P subroutine handling	vor 7 Jahren
Scott Lahteine	2390f6d3ab	Cleanup, apply standards to SD lib, cardreader	vor 7 Jahren
Scott Lahteine	eacb6b6e8b	Fix parser value handling	vor 7 Jahren
Steven Gotthardt	7efffc1548	Update Anet A8 default values from my Anet A8 experience	vor 7 Jahren
RowanMeara	10e366ebd7	Change dithering behavior to intended.	vor 7 Jahren
Scott Lahteine	95590adf07	Make sure `leveled[]` is enabled for use	vor 7 Jahren
Scott Lahteine	8d06cf7b84	Add M114_DETAIL to Configuration_adv.h	vor 7 Jahren
Steven Gotthardt	645b586041	Fix warnings for REPRAPWORLD_KEYPAD	vor 7 Jahren
Scott Lahteine	069ec3f9a9	Move Filament Width Sensor to Configuration_adv.h	vor 7 Jahren
Scott Lahteine	56035e9965	Move mesh test options under G26 option	vor 7 Jahren
Scott Lahteine	d65c99f38b	Drop unused LARGE_FLASH option	vor 7 Jahren
Scott Lahteine	90c7d28055	Extrudrboard support for Printrboard Rev.F	vor 7 Jahren
Rowan Meara	d2df00bfca	[1.1.x] Fix compilation warnings (#8395) * Fix up Travis CI and compile warnings/errors * No ULTRA_LCD with REPRAP_DISCOUNT_SMART_CONTROLLER * No point in setting all the endstop plugs	vor 7 Jahren
Scott Lahteine	25ec0fecfa	Apply native workspace fixes to G92, G53-59	vor 7 Jahren
RowanMeara	227b96b28b	Fix M428 This fixes the old implementation of M428 which was broken, did not match the website, and made no sense.	vor 7 Jahren
Scott Lahteine	a2c013c8c7	Fix LCD pins for Printrboard v1	vor 7 Jahren
Scott Lahteine	f27196214b	Fix Printrboard pins for parity with 2.0	vor 7 Jahren
Scott Lahteine	aa616cd410	No leveling data in M114 without leveling	vor 7 Jahren
Scott Lahteine	5926159890	Fix report_current_position Thanks @RowanMeara!	vor 7 Jahren
Roxy-3D	c9f88297b8	Provide more clearance for BL-Touch probe	vor 7 Jahren
Scott Lahteine	355dfed437	Coding standard patch of M290	vor 7 Jahren
Scott Lahteine	802ae73b13	Turn off laser power pin when PWM goes to 0	vor 7 Jahren
Scott Lahteine	549c814e8d	Remove offsets from soft endstops, tool change	vor 7 Jahren
Scott Lahteine	564fbc8dec	M290 constrain patch	vor 7 Jahren
Scott Lahteine	df44bcc5ae	Use do_blocking_move_to where possible	vor 7 Jahren
Scott Lahteine	3293823642	Add pre-calculated planner.e_factor	vor 7 Jahren
Scott Lahteine	24b302c001	Fix cold/lengthy extrusion handling	vor 7 Jahren
Thomas Moore	4714fb8fcb	Normalize load/unload length in M600	vor 7 Jahren
Scott Lahteine	b0ff3a4c6d	Cleanup around updatePID	vor 7 Jahren
Scott Lahteine	7aadfe32e7	Prevent position_is_reachable disaster	vor 7 Jahren
LVD-AC	8ce9306b27	PROBE_SELECTED etc.	vor 7 Jahren
Scott Lahteine	80682ec61e	Updates Traditional Chinese, rebase for bugfix-1.1.x	vor 7 Jahren
Scott Lahteine	deaa70c2cc	Update macros for parity with 2.0.x	vor 7 Jahren
Scott Lahteine	7535c21894	Remove some trailing white-space	vor 7 Jahren
Roxy-3D	8327667988	Correct gMax 1.5+ nozzle size to the right number Also... Doing a 'Direct Commit' to see if that is 'acceptable' for small changes like this. I want to look at the commit history and see how the logs handle this type of change.	vor 7 Jahren

Erste Vorherige 1 2 3 4 5 ... Nächste Letzte

7237 Commits (82df656cc7b1a9e30a5405a535b0c0e641fd1bbf)