marlin

Commit-Graf

Upphovsman	SHA1	Meddelande	Datum
Scott Lahteine	dd2949922b	Consolidate 3-point leveling point options	7 år sedan
Scott Lahteine	c6ff39cc14	Spacing cleanup	7 år sedan
Scott Lahteine	14c03cb6f4	[2.0.x] Make MIN_PROBE_EDGE a general option (for electronic probes) (#10069) Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.	7 år sedan
Scott Lahteine	28f1276286	[2.0.x] Add Z_AFTER_PROBING option (#10058) Some "fix-mounted" probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.	7 år sedan
Scott Lahteine	79e6d890d5	Add UNKNOWN_Z_NO_RAISE to example configs	7 år sedan
Scott Lahteine	a2a672449a	Updated boot screen description	7 år sedan
Scott Lahteine	4953fb1c88	Standardize encoder defaults	7 år sedan
Scott Lahteine	5684beae90	Bring some configs up to speed	7 år sedan
Scott Lahteine	2024775e07	Spanish (UTF8) Language (#9786) From #7314 by @MrAmericanMike	7 år sedan
Scott Lahteine	17d984eab3	Add RESTORE_LEVELING_AFTER_G28 to example configs	7 år sedan
Scott Lahteine	7d8c6b3f3c	Add 20x4 option for Sainsmart LCD (#9740)	7 år sedan
Scott Lahteine	8733d5a296	Add NUM_RUNOUT_SENSORS to example configs	7 år sedan
Scott Lahteine	ca55f2927a	Pulldown pin mode support (#9701) Implemented for LPC1768.	7 år sedan
Roxy-3D	21e60fd3ed	Allow user to control Z-Height correction for off mesh movements (#9661)	7 år sedan
Scott Lahteine	2ec65051fd	Fix serial comment sp.	7 år sedan
Scott Lahteine	38c7d53bf7	Repair some spacing	7 år sedan
Scott Lahteine	2014d38e10	NEOPIXEL_BRIGHTNESS parity	7 år sedan
Scott Lahteine	b5e92f4f90	[2.0.x] Enable / disable PSU automatically (#9503)	7 år sedan
Scott Lahteine	eecb0188c0	Add ULTI_CONTROLLER to example configs	7 år sedan
Scott Lahteine	4925f60cff	Add MALYAN_LCD to configs	7 år sedan
Scott Lahteine	7d6c009104	Add thermistor 15 tuned for JGAurora A5	7 år sedan
Scott Lahteine	58ed9901d7	Consistent NEOPIXEL_TYPE options	7 år sedan
Scott Lahteine	fa432508b0	Followup to Ender config	7 år sedan
Thomas Moore	dabb75034c	Update example configurations	7 år sedan
GMagician	5295b4713d	[2.0.x] add semitec 104NT-4 (#9119) Table is very very similar to old 104-GT2 so I added only the name and recycled old ID	7 år sedan
Thomas Moore	f0a8a1a853	[2.0.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE (#8866) * Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE	7 år sedan
Scott Lahteine	28fc8741d6	Reduce default jerk. XY by half. Z by 1/4	7 år sedan
Scott Lahteine	1cf1cf8759	Add RADDS_DISPLAY to example configs	7 år sedan
Scott Lahteine	9abbcc3ee0	Apply ZONESTAR_LCD to example configs	7 år sedan
Scott Lahteine	69d49a2438	Shorter segments may be better	7 år sedan
Scott Lahteine	d7800e7975	Apply MULTIPLE_PROBING to example configs	7 år sedan
Richard Wackerbarth	c1184552ac	Change K1 to required option PID_K1	7 år sedan
Scott Lahteine	aa7efb96bf	Bring configurations up to date	7 år sedan
Scott Lahteine	082ab8fcab	Add SKEW_CORRECTION to example configs	7 år sedan
Scott Lahteine	7c61bcb058	Apply SEGMENT_LEVELED_MOVES to example configs	7 år sedan
Scott Lahteine	5926c9c97b	Followup for MESH_EDIT_GFX_OVERLAY	7 år sedan
Scott Lahteine	5ce7f23afa	Config option G26_MESH_VALIDATION for all meshes	7 år sedan
Scott Lahteine	3f0a982b8c	Move Filament Width Sensor to Configuration_adv.h	7 år sedan
Scott Lahteine	b76e173205	Move test extrusion options under G26	7 år sedan
Scott Lahteine	81b91b3f9d	Clean up some trailing white-space	7 år sedan
Scott Lahteine	00514857e9	SBASE serial port -1, RAMPS spacing	7 år sedan
Roxy-3D	967104e1ce	Default Extrusion Settings were off a few lines in some of the example config files. (#8333)	7 år sedan
Roxy-3D	ed62c621d7	Fix G26 Circle Drawing. Add Default Extrusion Settings (#8313) - Fix G26 Circle Drawing. - Add default extrusion settings so machine can print lines on print bed - Yet to be done: Get LCD Menu's to use these settings.	7 år sedan
Scott Lahteine	2c099fd4c2	Update Thermal Protection Documentation	7 år sedan
Scott Lahteine	93ba72ea83	Add SERIAL_PORT -1, set on SBASE, STM32F103RET6	7 år sedan
Scott Lahteine	7e43dd1d23	Fix probes configuration url Based on #8241 by @machaj	7 år sedan
android444	9cc1d8e312	[2.0.x] Support for SilverGate Board	7 år sedan
Scott Lahteine	34be5d33c0	The plural of 'axis' is 'axes'	7 år sedan
Scott Lahteine	7fad26549b	Concise SD_REPRINT_LAST_SELECTED_FILE description	7 år sedan
Scott Lahteine	46e9eae159	Tweak to M100 config comment	7 år sedan

Första Föregående 1 2 Nästa Sista

65 Incheckningar (93524c19947c42a99e286729b798edb4f77bdd24)