marlin

Commit graph

Autor	SHA1	Nachricht	Datum
Erik van der Zalm	f598077af3	Removed vc files	vor 13 Jahren
Erik van der Zalm	cb0c84e075	Merge remote-tracking branch 'justblair/master' into Marlin_v1	vor 13 Jahren
ErikZalm	1d5809d458	Merge pull request #88 from daid/Marlin_v1 Made plan_buffer_line arguments const...	vor 13 Jahren
Erik van der Zalm	ed951b1977	Fixed RAMPS 1.2 support (Found and fixed by rrhb)	vor 13 Jahren
Blair Thompson	4879de08e8	The percent complete for the SD file statistic sits squint. Changed "lcd.Setcursor (7,2);" to "lcd.Setcursor (10,2);". The percent complete now lines up with the temperatures and Z-axis position figures, nicer to read and nicer to look at IMHO.	vor 13 Jahren
Blair Thompson	f278e1c00f	This is in my opinion a much better way of dealing with SD cards than my previous fix. Instead of adding a momentary switch to fake the insertion of the card I have modified the ultralcd menu item: Card Menu -> Refresh to reinitialise the card providing that the SDCARDDETECT pin has been set to -1 in the pins.h file. This requires one less switch on the front panel and the refresh menu item is in the most relevent place for a user who wishes to inert a card and then print from it. It also means that the "Card inserted" messages do not bother the users of these card readers (they dont make sense for users without SCCARDDETECT)	vor 13 Jahren
Blair Thompson	046a8e0039	Added more defines to the language.h file so that nowe most of the text strings are now configured via this file. Still got some hunting down to do to complete this task.	vor 13 Jahren
haxar	79a466ca26	make analog2tempBed return a precise celsius reading for BED_USES_THERMISTOR, complementing changes to analog2temp in d15f01e	vor 13 Jahren
Christian Thalhammer	5f3a422e68	added M31 - delete file from sd card	vor 13 Jahren
Christian Thalhammer	fa2e3a40e9	fixed LCD manual z axis move Feedrate to 70 (was 1700)	vor 13 Jahren
Christian Thalhammer	a92b3afe64	added german translation;Menue should be in english.. sounds better	vor 13 Jahren
Christian Thalhammer	9fa586bbed	fixed languages; Preheat_PLA and Preheat_ABS was not defined for non english	vor 13 Jahren
Daid	00d33e6b82	Typo fix	vor 13 Jahren
Daid	7d124478fa	Only protect the heater pins for the defined extruders. Changed the way the extruder pins are defined so it doesn't create extra -1 entries in the list.	vor 13 Jahren
Daid	3d83109028	Fixed general 16x2 LCD build without SD support.	vor 13 Jahren
Christian Thalhammer	cb02914687	Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1	vor 13 Jahren
Christian Thalhammer	10bf2bb8e1	-	vor 13 Jahren
Daid	d47b666630	Merge branch 'Marlin_v1' of git://github.com/ErikZalm/Marlin into Marlin_v1	vor 13 Jahren
Daid	88d289caa1	Made plan_buffer_line arguments const, which optimizes better and fixes the RUNOUT_PREVENTION feature.	vor 13 Jahren
Erik van der Zalm	b4833d55c2	Fixed HOME_POS in combination with G28 X0 or G28 Y0	vor 13 Jahren
Erik van der Zalm	c6f2ec3c82	remove stop_heating_wait	vor 13 Jahren
Erik van der Zalm	b48d67ce10	Fixed homing	vor 13 Jahren
ErikZalm	071eec7aa7	Merge pull request #81 from phord/09469add55 Clean up and add some trace info	vor 13 Jahren
ErikZalm	1ebe7d1ab6	Merge pull request #83 from phord/tempfix Add explicit #define for bogus temp override	vor 13 Jahren
ErikZalm	de37b2264a	Merge pull request #82 from phord/fix-gen7-build pins.h: Define Z_MAX_PIN for Gen7 board	vor 13 Jahren
Phil Hord	b65ef8d66c	Add support for upcoming Gen7 v1.4 V1.4 moves thermistor power to the always-on 5v line. The BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE is no longer needed on this board. Add a new motherboard type to support this feature.	vor 13 Jahren
Phil Hord	740f0c7690	Add explicit #define for bogus temp override The code to ignore the "bad thermistor reading failsafe" suicide function depends on the existing of the PS_ON pin feature. But in some boards this shouldn't be the case Fix this by adding an explicit definition to make our intentions more clear and separable.	vor 13 Jahren
Phil Hord	ba8500a236	pins.h: Define Z_MAX_PIN for Gen7 board The Z_MAX_PIN value was defined as no-value, but this causes the compile to fail. Fix this by setting the Z_MAX_PIN to the correct value (which happens to be 0 for pin PB0/DIO0/0).	vor 13 Jahren
Phil Hord	09469add55	Add board reset reporting (from Repetier-Firmware)	vor 13 Jahren
Phil Hord	f3101e96d9	Add suitable .gitignore to avoid build noise	vor 13 Jahren
Phil Hord	245dca4bee	Makefile: generic pde=>cpp rule This adds flexibility to the makefile by allowing different pde targets to be specified for different needs.	vor 13 Jahren
Erik van der Zalm	97d42ca2b2	SDSUPPORT default disabled	vor 13 Jahren
ErikZalm	2faa0852b9	Merge pull request #79 from changwoo/Marlin_v1 Fix build on Sanguino based boards with ATmega1284P	vor 13 Jahren
Changwoo Ryu	7b14953c99	Fix build on Sanguino based boards with ATmega1284P	vor 13 Jahren
Daid	286d5003fa	Fixed compiler warning for Sanguino compile	vor 13 Jahren
ErikZalm	66d50562b6	Merge pull request #76 from iXce/Marlin_v1 Fix Makefile	vor 13 Jahren
Erik van der Zalm	27f595a444	Changed version => RC2	vor 13 Jahren
Erik van der Zalm	018c567abf	Moved SLOWDOWN function. (jetty840) Included AD595 calibration options. (daid)	vor 13 Jahren
Erik van der Zalm	4fbda5c3f5	Merge remote-tracking branch 'daid/Marlin_v1' into Test	vor 13 Jahren
Erik van der Zalm	ce714fe306	Fixes in pins.h	vor 13 Jahren
Erik van der Zalm	35e57bf149	Added gen6 deluxe.	vor 13 Jahren
Erik van der Zalm	84ea2d61e8	Moved gen7 boards to motherboard type 10, 11 and 12. Split ramps1.3 in Sprinter like config and multiextruder config.	vor 13 Jahren
Guillaume Seguin	adc108d79e	Correctly build the produced applet/Marlin.cpp source	vor 13 Jahren
Erik van der Zalm	5aa9c41ab1	Changed comment mode for detection. Added M221 extuder multiply factor.	vor 13 Jahren
Erik van der Zalm	00690f7ffd	Fix cast warning in Gen7	vor 13 Jahren
Erik van der Zalm	01d28c18ab	Fixed casting warning in sanguino	vor 13 Jahren
Blair Thompson	2fd8c248fe	Added Fan control to the pre-heat settings. I find that the PID routine works better when the cooling fan is switched on at the beginning of a warm up routine. Otherwise when you enable the fan just before a print, you have a delay as the PIDre-adjusts. This should also be safer as most cooling fans are directed at the hot -ends thermal barrier!	vor 13 Jahren
Blair Thompson	d9f2f509d5	Added new menu items under the prepare submenu. Instead of a single pre-heat, now there is pre-heat ABS and PLA options Added defines to the configuration file to adjust preheat temperatures for both	vor 13 Jahren
Erik van der Zalm	ae3e7586c6	Added HOME_POS. This adds the posibility to make the center 0 Updated the Xsteps ... settings via the LCD menu	vor 13 Jahren
Erik van der Zalm	df1437bd86	Changed display format for some numbers.	vor 13 Jahren