marlin

Commit grafiek

Auteur	SHA1	Bericht	Datum
Scott Lahteine	b7e938a9fb	LCD_BED_LEVELING enables a sub-menu for ABL	7 jaren geleden
Scott Lahteine	c87b0e21be	Add units to probe speed comments	7 jaren geleden
Scott Lahteine	05c33833e7	[2.0.x] Add NO_LCD_MENUS option (#10582)	7 jaren geleden
Scott Lahteine	9e07df5c1b	Extra options for LEVEL_BED_CORNERS (#10483)	7 jaren geleden
Scott Lahteine	a90cbc6339	[2.0.x] Wait for bed heaters between probing (#10472)	7 jaren geleden
KangDroid	6c535081ec	[2.0.x] Add optional menu item to toggle software endstops (#10389)	7 jaren geleden
Yunhui Fu	c96412a78f	[2.0.x] UTF-8 language translation support (#10213)	7 jaren geleden
Scott Lahteine	82dafbba33	Add Z_PROBE_LOW_POINT to example configs	7 jaren geleden
Scott Lahteine	dca69efc11	Update Bed PID comments	7 jaren geleden
Scott Lahteine	5932df7ea1	Add BEZIER_JERK_CONTROL to example configs	7 jaren geleden
Scott Lahteine	5b3bda1c16	Add Chamber Temp options to example configs	7 jaren geleden
Scott Lahteine	adcb87f0db	Z Endstop Servo => Z Probe Servo	7 jaren geleden
Scott Lahteine	dd2949922b	Consolidate 3-point leveling point options	7 jaren geleden
Scott Lahteine	c6ff39cc14	Spacing cleanup	7 jaren geleden
Scott Lahteine	14c03cb6f4	[2.0.x] Make MIN_PROBE_EDGE a general option (for electronic probes) (#10069) Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.	7 jaren geleden
Scott Lahteine	28f1276286	[2.0.x] Add Z_AFTER_PROBING option (#10058) Some "fix-mounted" probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.	7 jaren geleden
Scott Lahteine	79e6d890d5	Add UNKNOWN_Z_NO_RAISE to example configs	7 jaren geleden
Scott Lahteine	a2a672449a	Updated boot screen description	7 jaren geleden
Scott Lahteine	4953fb1c88	Standardize encoder defaults	7 jaren geleden
Scott Lahteine	078627f805	[2.0.x] Creality Ender-4 configuration (#9803) * Move Creality Ender-2 configurations * Add Creality Ender-4 configurations	7 jaren geleden
Scott Lahteine	5684beae90	Bring some configs up to speed	7 jaren geleden
Scott Lahteine	2024775e07	Spanish (UTF8) Language (#9786) From #7314 by @MrAmericanMike	7 jaren geleden
Scott Lahteine	17d984eab3	Add RESTORE_LEVELING_AFTER_G28 to example configs	7 jaren geleden
Scott Lahteine	7d8c6b3f3c	Add 20x4 option for Sainsmart LCD (#9740)	7 jaren geleden
Scott Lahteine	8733d5a296	Add NUM_RUNOUT_SENSORS to example configs	7 jaren geleden
Scott Lahteine	ca55f2927a	Pulldown pin mode support (#9701) Implemented for LPC1768.	7 jaren geleden
Scott Lahteine	bab0e975c8	The ENDER can use BOARD_MELZI_CREALITY (#9692)	7 jaren geleden
Scott Lahteine	b5e92f4f90	[2.0.x] Enable / disable PSU automatically (#9503)	7 jaren geleden
Scott Lahteine	eecb0188c0	Add ULTI_CONTROLLER to example configs	7 jaren geleden
Scott Lahteine	4925f60cff	Add MALYAN_LCD to configs	7 jaren geleden
Scott Lahteine	7d6c009104	Add thermistor 15 tuned for JGAurora A5	7 jaren geleden
Scott Lahteine	348b454401	Probe bounds based on bed size	7 jaren geleden
Scott Lahteine	c68ce8667d	Fix and improve Creality configs	7 jaren geleden
Scott Lahteine	fa432508b0	Followup to Ender config	7 jaren geleden
Scott Lahteine	9a2dd0bc5a	Creality Ender 2/4 configuration	7 jaren geleden
Scott Lahteine	048486390e	Bring some configs up to date	7 jaren geleden
GMagician	5295b4713d	[2.0.x] add semitec 104NT-4 (#9119) Table is very very similar to old 104-GT2 so I added only the name and recycled old ID	7 jaren geleden
Thomas Moore	f0a8a1a853	[2.0.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE (#8866) * Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE	7 jaren geleden
Scott Lahteine	28fc8741d6	Reduce default jerk. XY by half. Z by 1/4	7 jaren geleden
Scott Lahteine	1cf1cf8759	Add RADDS_DISPLAY to example configs	7 jaren geleden
Scott Lahteine	f79026acc1	Apply MKS_12864OLED_SSD1306 to examples Followup to #8814	7 jaren geleden
Scott Lahteine	9abbcc3ee0	Apply ZONESTAR_LCD to example configs	7 jaren geleden
Scott Lahteine	69d49a2438	Shorter segments may be better	7 jaren geleden
Scott Lahteine	d7800e7975	Apply MULTIPLE_PROBING to example configs	7 jaren geleden
Richard Wackerbarth	c1184552ac	Change K1 to required option PID_K1	7 jaren geleden
Scott Lahteine	aa7efb96bf	Bring configurations up to date	7 jaren geleden
Scott Lahteine	082ab8fcab	Add SKEW_CORRECTION to example configs	7 jaren geleden
Scott Lahteine	7c61bcb058	Apply SEGMENT_LEVELED_MOVES to example configs	7 jaren geleden
Scott Lahteine	5926c9c97b	Followup for MESH_EDIT_GFX_OVERLAY	7 jaren geleden
Scott Lahteine	5ce7f23afa	Config option G26_MESH_VALIDATION for all meshes	7 jaren geleden

20 Commits (b7e938a9fbc2c5dc9bc59ed56cb4c63e803d3ec7)