marlin

Commit Graph

Автор	SHA1	Съобщение	Дата
Scott Lahteine	b88117d636	🎨 Fix L64xx enable, clean up conditionals	преди 3 години
InsanityAutomation	08a40c4375	✨ Improve pause/filament change for ExtUI (#22655)	преди 3 години
Scott Lahteine	6b9b2c5d73	🩹 Warn about user feedback requirement	преди 3 години
Scott Lahteine	754b31918a	🎨 Fewer serial macros	преди 3 години
Miguel Risco-Castillo	0f61d9e4dd	✨ Ender-3 V2 CrealityUI Enhanced (#21942) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	преди 3 години
Scott Lahteine	fb29135c74	✨ Creality3D CR-30 PrintMill	преди 3 години
Scott Lahteine	7d416bd055	✨ MarlinUI for Ender 3 v2 DWIN LCD (#22594) Co-Authored-By: Taylor Talkington <taylor.talkington@gmail.com>	преди 3 години
Scott Lahteine	536cf287a6	🎨 Misc code and spacing cleanup	преди 3 години
Scott Lahteine	3b57c3316a	Misc. Cleanup	преди 3 години
tobuh	8e56f9366d	Fix and improve Power-Loss Recovery (#21779) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	преди 4 години
Scott Lahteine	b65cdbed91	Signal SD completion later (#21840)	преди 4 години
Scott Lahteine	dfc906930c	Pause and PLR refinements - Move `pause_print` argument `unload_length` after `show_lcd` so it's next to `DXC_ARGS`. - Tweak the position and conditions of PLR save in `resume_print`. - Add `Nozzle::park_mode_0_height` accessor to get the raised Z height. - Remove extraneous `recovery.save` from `dwin.cpp`. - Move PLR `info.volumetric...` to `flag`. - Remove some G-code spaces in PLR code - Document `pause.h` function declarations.	преди 4 години
Sebastiaan Dammann	8b5e7429d7	Prevent extrusion on M600 un-park (#21670) Fixes #21669	преди 4 години
Scott Lahteine	c4620bb528	Add whole-degree accessors, simplify some temperature-related features (#21685)	преди 4 години
BigTreeTech	a58276c4c1	Enable Purge More / Resume with EP + Host Prompt (#21671) Co-authored-by: Msq001 <alansayyeah@gmail.com>	преди 4 години
espr14	a5d6f6ac98	Fix Resume Print with UBL (#21564) Co-authored-by: Scott Lahteine <github@thinkyhead.com>	преди 4 години
Scott Lahteine	62f37669dc	Replace 'const float &' with 'const_float_t' (#21505)	преди 4 години
Miguel Risco-Castillo	930752d46e	Ender 3 V2 Status Line (#21369) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	преди 4 години
Scott Lahteine	e5ff55a1be	Add typedef celsius_t (#21374)	преди 4 години
Scott Lahteine	1aa421efe5	Filament sensor cleanup	преди 4 години
Scott Lahteine	dd42831cba	Serial macros cleanup	преди 4 години
Arjan Mels	83a156ef47	Fix M876 when called from EP (#21210)	преди 4 години
X-Ryl669	e7c711996b	Serial refactor. Default 8-bit ECHO to int, not char (#20985) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	преди 4 години
Scott Lahteine	c0870d417a	Move some MarlinCore and MarlinUI code (#20832)	преди 4 години
Belin Fieldson	465840e1fb	Loosen E on pause for fila-manipulation (#20346) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	преди 4 години
pseudex	4258ff1a68	Allow cold Filament Load/Unload with M302 P1 (#20262) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	преди 4 години
Victor Oliveira	7a04df47f2	Fix Load Filament wait (#20243)	преди 4 години
Scott Lahteine	35b9e9b4a5	Tweak a host prompt call	преди 4 години
Scott Lahteine	eaf6777a66	Rename ultralcd => marlinui	преди 4 години
nb-rapidia	418b3e5ee2	Fix IDEX layer shift and DIR states (#19756) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	преди 4 години
rlojek	72e3238c3f	Fix ADVANCED_PAUSE && !PREVENT_COLD_EXTRUSION (#19740)	преди 4 години
Scott Lahteine	98427ea92a	Save PLR on resume from pause (#19676) Co-Authored-By: shahab <32130261 +SHBnik@users.noreply.github.com>	преди 4 години
Ilya	e56295851f	No move on Park = No move on Resume (#19569)	преди 4 години
ellensp	979876e958	Improve temperature runaway, idle timeout (#19339) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	преди 4 години
Giuliano Zaro	b2ba9009d0	Fix "too cold" in M600 (#19332)	преди 4 години
Giuliano Zaro	828a582f4d	Make M600 heat up the nozzle. Reset runout on fail. (#19298) Co-authored-by: Scott Lahteine <github@thinkyhead.com>	преди 4 години
swissnorp	a12ac5e175	Mark axes not-homed with HOME_AFTER_DEACTIVATE (#18907)	преди 4 години
Robby Candra	1b097d0467	Wait for hotend temp before Resume move (#19009)	преди 4 години
ManuelMcLure	0bc8d315d8	Close host's Filament Change dialog (#18785)	преди 4 години
InsanityAutomation	e1191ded02	Fast Filament Change temperature check (#18738)	преди 4 години
Diego von Deschwanden	42fbd527f3	Fix links to secure sites (#18745)	преди 4 години
chestwood96	1475fd312a	M600 R<resume temperature> (#17919) Co-authored-by: Scott Lahteine <github@thinkyhead.com>	преди 5 години
Scott Lahteine	0eeb5e2a29	General cleanup: pause, MarlinCore	преди 5 години
Scott Lahteine	8b3c7dda75	Add HAS_FAN and others	преди 5 години
Ondřej Nový	d2a5d51f69	Add NOZZLE_PARK_Z_RAISE_MIN (#17624)	преди 5 години
Ondřej Nový	468b813bc1	Better ooze prevention during pause (#17625)	преди 5 години
Scott Lahteine	6d90d1e1f5	Apply TERN to compact code (#17619)	преди 5 години
Scott Lahteine	000ec9fc13	Ensure language.h include order See #17604	преди 5 години
Desuuuu	2824e67d95	Add ExtUI::onStatusChanged_P (#17543)	преди 5 години
Scott Lahteine	0e06aaa2bc	Add millis helper macros	преди 5 години

Първа Предишна 1 2 3 4 Следваща Последна

152 Ревизии (b88117d6364b8919a8a7df6c80d8132af98a6afc)