264 커밋 (c51a6f94e01e60984114f0685ff07cfe1585189d)

작성자 SHA1 메시지 날짜
  Greg Tan 6e6e4e2143 Added thermistor table for the 500C thermistor shipped with the Pico hot end. 11 년 전
  Dim3nsioneer 8a32c5395b renaming the disable inactive extruder feature 11 년 전
  Dim3nsioneer 29e7639933 Add switch unused feeder(s) off 11 년 전
  David Forrest 09b84faa00 Configuration.h, pins.h: Add MOTHERBOARD 84 for Teensy++2.0 11 년 전
  daid 8b4c4aa5c3 Add feature to check&retry CRC read errors on SD. 11 년 전
  Cameron Lai da6b536182 Add 5DPrint D8 Driver Board info and temperature table for Makibox hot bed 11 년 전
  Nutz95 3161740df9 This table is made for thermistor 3950 (can be found on ebay for cheap) 11 년 전
  Gabe Rosenhouse d3f305332a Allowable range now includes default value 11 년 전
  Gabe Rosenhouse b0aeac117f Adjustable Z probe offset, via custom M-code 11 년 전
  David Forrest b0093a1513 thermistortables.h: Add comments that table 60 uses beta=3950. 11 년 전
  Gabe Rosenhouse 174b8d99d5 Simplify 3-point probing using new code only 11 년 전
  Gabe Rosenhouse 3b718b816c better documentation 11 년 전
  Gabe Rosenhouse 34fd59c370 ABL at any points 11 년 전
  Mark Hanford ab0d3c4fb3 Various typo fixes - only in comments, no code changes. 11 년 전
  Josef Pavlik 831fc2a952 Pt100 and Pt1000 temperature sensors handling 11 년 전
  daid 71bb3a8133 Add comments for Ultimainboard 2.0 configuration. 11 년 전
  Jim Morris b819fc53ca Add Azteeg X3 Pro as motherboard 68 11 년 전
  David Forrest a5f53f0cf3 Heater wattage reporting for M105 using EXTRUDER_WATTS and BED_WATTS 11 년 전
  Ronald 8d162e5bd7 Improved support for panelolu2 encoder and buzzer 11 년 전
  David Forrest 76cf07c3f7 Configuration.h: Use OVERSAMPLENR in dT_PID definition. 11 년 전
  - e5d3044801 Added posibility to set ENCODER_STEPS_PER_MENU_ITEM in Configuration.h like ENCODER_PULSES_PER_STEP as it depends on it for usability 11 년 전
  Michal Dyntar e8786bf110 Added support for Cheaptronic v1 electronic 11 년 전
  fsantini cc2925b705 Implemented a least squares fit of the bed equation for auto bed leveling. 11 년 전
  Alex Borro b33375d438 Z Axis Safe Homing when using Z Probe 11 년 전
  Erik van der Zalm 48a185d004 Fixed compile errors from bad commits. 11 년 전
  fmalpartida 7b556d2e96 Added BT support on AT90USB devices 11 년 전
  Kaz Walker a5e8575829 Add UUID support to M115 responses. 11 년 전
  fmalpartida b5a964fcc5 Initial SAV MkI (RepRap CloneWars board) integration. 11 년 전
  dumle29 f941203172 PS_ON configurable boot state 11 년 전
  Erik van der Zalm 8a08cca0f2 Added temperature status less. 11 년 전
  Alex Borro 6f85a8c7aa Bed auto Leveling change: Raise Z before homing 11 년 전
  Alex Borro 253dfc4bc1 Bed Auto Leveling feature 11 년 전
  phq1910 57173739a1 Update Configuration.h 11 년 전
  Erik van der Zalm 0dca49a7c0 Added Azteeg X3 board. 11 년 전
  Erik van der Zalm d8c2c810b4 Added info to the delta configuration files in the configuration.h file 11 년 전
  Erik van der Zalm 9bc88f8bab Placed optional ENCODER_PULSES_PER_STEP in the configuration.h file 11 년 전
  Tim Koster 61db046b32 Added #ifdef BLINKM around new code. Also refined BlinkM.h. 11 년 전
  Erik van der Zalm 3626b5ad8b Removed Delta from the default config file. 11 년 전
  Tim Koster 88dfeefca3 Define BlinkM default disabled 11 년 전
  Tim Koster 7016cc9511 Added BlinkM support over i2c 11 년 전
  Tim Koster 3b315b3da0 Added BlinkM support over i2c 11 년 전
  hg42@gmx.net 2ca983568d separate INVERTING for MIN and MAX endstops (6 #defines instead of 3) 12 년 전
  Nicolas Rossi 9bf1cf1b22 Pre-calculate diagonal rod length squared 12 년 전
  Nicolas Rossi 4623e78ce0 Added Honeywell thermistor 135-104LAF-J01 12 년 전
  Jim Morris ab624eac2a revert COnfiguratiuon to the same as head 12 년 전
  Jim Morris fb20ceabce enable soft endstops for delta 12 년 전
  Jim Morris d01ee7e7b5 fix zjerk being the same for delta as xy jerk 12 년 전
  Jim Morris f3aa2a48e7 update max pos 12 년 전
  Jim Morris 460751503e Added default configurations for deltas when DELTA is defined 12 년 전
  Erik van der Zalm c4a2077951 M109 and M190 now wait when cooling down if R is used instead of S. 12 년 전