marlin

提交線圖

作者	SHA1	備註	提交日期
David Forrest	09b84faa00	Configuration.h, pins.h: Add MOTHERBOARD 84 for Teensy++2.0	11 年之前
Cameron Lai	105bebb466	Fix for pin mapping for SDSS pin and Fan pin, so Arduino library can be used	11 年之前
Cameron Lai	97ead2eccb	Fix for microstepping pin mapping, not using Teensy pin mapping, but Arduino's default pin mapping so Arduino library can be used	11 年之前
Cameron Lai	2fa514e88a	Add port for 5DPrint D8 Driver board	11 年之前
nothinman	dfb98101e4	Change CONTROLLERFAN_PIN for board 35 to -1, as it would conflict with board's 33 extruder pin, causing burnout (it's the same board, just different number of fans/extruders, therefore should be pin-compatible)	11 年之前
Ralf Schultz	eecda434fb	Sanguinololu servo pins set default disabled	11 年之前
Ralf Schultz	06709ad60e	Added servo pin assignments to Sanguinololu	11 年之前
Peter	c9c83a4560	Updated gen3+ board pins names to current convention	11 年之前
daid	d16a770855	Ultimainboard 2.x does not has a PS_ON pin.	11 年之前
Jim Morris	5097c57d3a	Added pins for Azteeg X3 Pro under motherboard 68	11 年之前
Jim Morris	b819fc53ca	Add Azteeg X3 Pro as motherboard 68 Add digipot i2c control for MCP4451 Allow M907 to set i2c digipot currents in amps Fix Makefile to allow Azteeg motherboards Fix Makefile to allow Wire libraries only Add beeper pin for Azteeg X3 Pro	11 年之前
Ronald	8d162e5bd7	Improved support for panelolu2 encoder and buzzer I added #define for LCD_FEEDBACK_FREQUENCY_HZ and LCD_FEEDBACK_FREQUENCY_DURATION_MS which is used to alter the default buzzer sound. When selecting Panelolu2 in configuration.h: - it automatically sets the correct ENCODER_PULSES_PER_STEP and ENCODER_STEPS_PER_MENU_ITEM. - if LCD_USE_I2C_BUZZER is defined it will also set the default LCD_FEEDBACK_FREQUENCY_HZ and LCD_FEEDBACK_FREQUENCY_DURATION_MS When selecting the sanguinololu 1284p the following is true: - its now enables LARGE_FLASH - It enables the gcode M300 when the panelolu2 LCD_USE_I2C_BUZZER is defined	11 年之前
daid	df194f75e1	Added PT100 support for Ultiboard2	11 年之前
daid	380144c20f	Add Ultiboard2 electronics. With PWM current settings. For the few people that have this new board as experiment in their UM-Original.	11 年之前
-	eed053dffb	Revert "Made numbering of heat bed thermistor more logical as D8 is bed, D9 is Extruder 2 and D10 is Extruder 1, so T0 should be E1, T1 E1 and T2 bed to be sequential as MOSFET-Outputs" This reverts commit b7eadb9f37.	11 年之前
-	b7eadb9f37	Made numbering of heat bed thermistor more logical as D8 is bed, D9 is Extruder 2 and D10 is Extruder 1, so T0 should be E1, T1 E1 and T2 bed to be sequential as MOSFET-Outputs	11 年之前
Michal Dyntar	e8786bf110	Added support for Cheaptronic v1 electronic	11 年之前
Daniel Benamy	cab84e0e5b	Add (correct) missing pin definitions for Y2 I tested this and it works.	11 年之前
fmalpartida	b5a964fcc5	Initial SAV MkI (RepRap CloneWars board) integration. Included support for BT dongle on AT90USB boards. Added LCD Shift Register LCD control Included support for RepRap Clone Wars project board (SAV MKI).	11 年之前
Erik van der Zalm	8a08cca0f2	Added temperature status less. Hopefully fixed viky button handling without braking other boards	11 年之前
phq1910	4f7c6dfe35	Update pins.h Include Pins cpu Sethi 3D	11 年之前
Erik van der Zalm	0dca49a7c0	Added Azteeg X3 board.	11 年之前
Martin Lukasik	acd8619809	Fan fix for Panelolu2+Sanguinololu.	11 年之前
Steve Kelly	53614e5144	add pins for rambo lcd	12 年之前
Guillaume Seguin	f4c3135c6d	Add Panelolu2 pins for RAMPS1.3	12 年之前
Guillaume Seguin	1902d339b0	Add Panelolu2 pins for RAMPS1.3	12 年之前
Michael Mayer	99b7e926e7	added MaKr3d Melzi board	12 年之前
Erik van der Zalm	2015989f84	Added DISABLE_MIN_ENDSTOPS	12 年之前
lajos	02dee80fa5	added Azteeg X1 motherboard	12 年之前
Erik van der Zalm	26a441fc7d	More 3Drag controller patches.	12 年之前
BorisLandoni	4c7d1436e9	Update pins.h	12 年之前
Scott Lahteine	5dabc95409	Apply all changes from latest Marlin_V1 Diffed and merged, preserving my updates	12 年之前
Gord Christmas	a733537ddd	Missed some variable declarations Integrated fixes from henrikbrixandersen pull request #504	12 年之前
Erik van der Zalm	5090c56651	More redundant temp sensor changes. (After testing and debugging by reifsnderb)	12 年之前
Gatulibu	b78fa6bb70	Added support for Megatronics v2.0 and Minitronics v1.0 merged from code downloaded from reprapworld.com	12 年之前
Erik van der Zalm	7231a20dba	Put #ifdef around servo pins in pins.h. This allows the pins to be used for M42.	12 年之前
Bas Spaans	424101110c	Add Panelolu2 support for Melzi	12 年之前
Gord Christmas	dc59f07d24	First attempt at refactoring of original servo code. Only adding servo support as a start to keep things simple.	12 年之前
MaikStohn	9cc15876be	Add support for RUMBA thermocouple add on	12 年之前
Erik van der Zalm	bd2cd4903e	Added #ifdef BARICUDA around the BariCUDA changes	12 年之前
Jordan Miller	fbd899a37d	Support for BariCUDA Paste Extruder derived from MakerBot Frostruder. Using Ultimachine RAMBo board. M126/M127 and M128/M129.	12 年之前
gregor	2739c26c4f	changes: - changed the variables from keypad to reprapworld_keypad - added a missing ifdef check	12 年之前
gregor	6fb9573157	added support for the reprapworld keypad	12 年之前
kiyoshigawa	b27a59f41e	Added support for Elefu RA Board and Elefu Control Panel	12 年之前
Scott Lahteine	a200521eab	Added CUSTOM_MENDEL_NAME option to Configuration.h and language.h Also cosmetic comment changes and spelling corrections in printed messages	12 年之前
Bracken Dawson	d5ee2a5a62	Make Gen7 1.4 heater pins match silkscreen	12 年之前
Colin Edwards	0d075378d5	Add LARGE_FLASH define and enable it for some of the beefier boards The LARGE_FLASH flag allows superfluous features to be excluded on boards with less memory	12 年之前
blddk	91bea43332	Added rumba pinout	12 年之前
Dirk Eichel	9a78f321a4	Add pins for Motherboard variant 64 These definition contain also the definition for the graphics LCD.	12 年之前
Nicolas Rossi	aba67e2449	No bed config for RAMPS The motherboard 35 is a config without bed with this pins setting : D8 Extruder D9 Fan D10 Controller Fan	12 年之前

142 次程式碼提交 (c51a6f94e01e60984114f0685ff07cfe1585189d)