marlin

Commit graph

Autor	SHA1	Nachricht	Datum
Scott Lahteine	868eebfdee	Simplify configuration of Z2 endstops	vor 9 Jahren
Scott Lahteine	3b2d159abd	Relax the test for "Heating failed" errors	vor 9 Jahren
Scott Lahteine	53cc6cca46	Formalize some dependencies on PIDTEMPBED	vor 9 Jahren
Scott Lahteine	e08915a723	Fix comments in Configuration_adv.h	vor 9 Jahren
Scott Lahteine	0da744b7b0	Further cleanup of comments, partial Doxygen-style Following up on #3231	vor 9 Jahren
jbrazio	5e5d250832	Added gplv3 header to all Marlin files	vor 9 Jahren
Blue-Marlin	3166aed087	Improve the descriptions for THERMAL_PROTECTION	vor 9 Jahren
Scott Lahteine	e5fd43f343	Implement BABYSTEPPING for COREXY and COREXZ	vor 9 Jahren
esenapaj2	236a44c83b	follow-up the PR #3131 follow-up the commit 7326d63ce0 update Configration_adv.h of Hephestos2 delete unnecessary spaces	vor 9 Jahren
Scott Lahteine	0c48eaf3de	Expose motor current in more configs, disable by default	vor 9 Jahren
Elijah Snyder	e8b10d2836	Adding PWM_MOTOR_CURRENT flag to help expose PWM_MOTOR_CURRENTS in Configuration_adv.h similar to DIGIPOT_MOTOR_CURRENT	vor 9 Jahren
Scott Lahteine	772460a7b8	Various minor spelling corrections Redo of #2939 rebased against RCBugFix	vor 9 Jahren
AnHardt	4b02f33e69	Distribute config-changes to the other configurations	vor 9 Jahren
AnHardt	b6e69e71ce	Make stepper shutdown after inactivity dependent Make stepper shutdown after inactivity dependent on a new set of #defines. DISABLE_INACTIV_X DISABLE_INACTIV_Y DISABLE_INACTIV_Z DISABLE_INACTIV_E And make exemplaric Configuration. Names can be discussed. This makes the disabling of the steppers independent from the DISABLE_? settings witch shut down the steppers immediately.	vor 9 Jahren
Scott Lahteine	1093c780c8	Remove obsolete STEPS_MM_E setting	vor 9 Jahren
Scott Lahteine	fbfbc5e330	Enable USE_WATCHDOG by default	vor 9 Jahren
Richard Wackerbarth	0cebe85e65	Clean up spacing and duplicate entries • Removing trailing whitespace • Adjusting indention for better readability • Removing duplicated entries	vor 9 Jahren
AnHardt	c956b52c4a	Babystep Multiplier Analog to https://github.com/MarlinFirmware/MarlinDev/pull/250 by @RicardoGA Restore the Babystep Multiplicator functionality and now it's available for X/Y/Z	vor 9 Jahren
Richard Wackerbarth	e01f5e1ef7	Cleanup	vor 9 Jahren
Scott Lahteine	bc50db9cf6	Implement PID_ADD_EXTRUSION_RATE	vor 9 Jahren
Scott Lahteine	28599c51c7	Wrap Dual Y options in a conditional	vor 9 Jahren
Scott Lahteine	11a065c0ca	Remove Z2 pins overrides from Configuration_adv.h	vor 9 Jahren
wurstnase	f3ab1dba54	Z babystepping for coreXY (PR#47) only X and Y were not implemented	vor 9 Jahren
Scott Lahteine	270c766de2	SDCARDDETECT -> SD_DETECT, added docs - `SD_DETECT_PIN` replaces `SDCARDDETECT` - `SD_DETECT_INVERTED` replaces `SDCARDDETECTINVERTED` - Revise the description of `SD_DETECT_INVERTED` - Add a note about the override of `SD_DETECT_INVERTED` in `Conditionals.h`	vor 10 Jahren
Scott Lahteine	37d1879386	Apply overridables to Configuration files	vor 10 Jahren
Scott Lahteine	ab6f1fdf8b	Move & document ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED (PR#2528) As suggested in #2521 - Move `ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED` because `SDSUPPORT` is also required. - Add a note that endstops must be enabled for the feature to have any effect	vor 10 Jahren
wurstnase	c85a486445	make the dual z-endstop optional (PR#2277) it's disabled by default	vor 10 Jahren
CONSULitAS	3a5963c0e7	Configuration_adv.h: Add FAN_MIN_PWM for slow fan stopping issue … * all Configuration_adv.h: Add #define FAN_MIN_PWM for slow fan stopping issue * for K8200: uncommented with tested (and working) values	vor 10 Jahren
paclema	8d295547be	* Auto filament change on CHANGEFILAMENT feature. Now you can activate this option that extrude filament until you press the button.	vor 10 Jahren
Ed Boston	bc205c76a3	SDCARDDETECTINVERTED problems Fixed an error where SDCARDDETECTINVERTED was being defined/undefined improperly	vor 10 Jahren
Christian Bohn	258bcdefe0	move dogm font selection to configuration_adv.h	vor 10 Jahren
AnHardt	7750180c93	transpire -> expire Minor wording correction.	vor 10 Jahren
Scott Lahteine	0f2c9bacfd	M33 LONG_FILENAME_HOST_SUPPORT	vor 10 Jahren
Scott Lahteine	76438195f0	NO_TIMEOUTS and ADVANCED_OK off by default	vor 10 Jahren
Scott Lahteine	d693e0f378	Use WATCH_TEMP_INCREASE + TEMP_HYSTERESIS + 1 as difference limit	vor 10 Jahren
Scott Lahteine	429c6ccad2	Neaten config formatting	vor 10 Jahren
Wurstnase	526ad82d20	activate advanced_ok and no_timeout	vor 10 Jahren
Scott Lahteine	2445ae3d3a	Combine thermal runaway and watch-period - Make thermal protection for all hotends and/or bed into simple switches - Now enable `WATCH_TEMP_PERIOD` when `THERMAL_PROTECTION_HOTENDS` is enabled - Move detailed thermal parameters to `Configuration_adv.h` - Add sanity checks to warn about old configurations - Change `WATCH_TEMP_PERIOD` to seconds instead of milliseconds	vor 10 Jahren
Scott Lahteine	79106638a8	Fix documentation of heating sanity check	vor 10 Jahren
Scott Lahteine	6110494a56	Change default to 4°C in 16s	vor 10 Jahren
Scott Lahteine	54deb9eea3	Enable WATCH_TEMP_PERIOD by default	vor 10 Jahren
Scott Lahteine	deedb00c18	Document WATCH_TEMP_PERIOD	vor 10 Jahren
Scott Lahteine	5b248757c7	Level Bed in Prepare submenu - Add “Level Bed” menu item for auto bed leveling - Hide the option if homing has not been done yet - Arrange the Prepare submenu more logically (?) - Add documentation comments, some white-space - Apply some coding standards here and there - Move old encoder multiplier debug option to `ultralcd.cpp`	vor 10 Jahren
Steve Kelly	98ca46006c	Allow Y to home before X with option in Configuration_adv.h. This addresses comments in #1956 and #1079. In particular, this is useful when both endstops are stationary on a CoreXY system, and the Y axis needs to be homed before the X so the flags are aligned.	vor 10 Jahren
Scott Lahteine	0fca084ea6	Make EEPROM reproducible in GCode With these changes the output of `M503 S0` is all you need to restore the EEPROM. Building on this it is straightforward to save and restore the EEPROM state using the SD card or external GCode file. - Added `M145` to set “heatup states” for the LCD menu - Added `M420` to toggle Mesh Bed Leveling - Added `M421` to set a single Mesh coordinate - Extended `Config_PrintSettings` with added M codes - Cleaned up some comments here and there	vor 10 Jahren
Wurstnase	92575cecca	new timout/add adv_ok	vor 10 Jahren
Wurstnase	b09a957fce	make 'wait' optional and mark as workaround	vor 10 Jahren
Scott Lahteine	7d2c2f1790	Updates for the configurator - Sections in all `Configuration_adv.h` - Recognize JAPANESE/WESTERN/CYRILLIC options - Better capturing of comments for tooltips	vor 10 Jahren
Richard Wackerbarth	46474cf2f2	Incorporate @section headers from configurator	vor 10 Jahren
Scott Lahteine	0e8182bbf2	Additional pin tests, cleanup	vor 10 Jahren

Erste Vorherige 1 2 3 4 Nächste Letzte

156 Commits (cc4bb5aa09db8077e60f93f23b36f4063f0dda7f)