marlin

コミットグラフ

作成者	SHA1	メッセージ	日付
Scott Lahteine	a2a672449a	Updated boot screen description	7年前
Scott Lahteine	4953fb1c88	Standardize encoder defaults	7年前
Scott Lahteine	5684beae90	Bring some configs up to speed	7年前
Scott Lahteine	2024775e07	Spanish (UTF8) Language (#9786) From #7314 by @MrAmericanMike	7年前
Scott Lahteine	b2cf253a13	Add RESTORE_LEVELING_AFTER_G28 option	7年前
Marcio Teixeira	716a22498f	Changed temp type from uint8_t to int16_t - Also deleted old implementation files which had been renamed.	7年前
Scott Lahteine	7d8c6b3f3c	Add 20x4 option for Sainsmart LCD (#9740)	7年前
Marcio Teixeira	aada1e698f	Removed unused configuration options.	7年前
Studiodyne	d3ca82d8c2	Support for multiple filament runout sensors	7年前
Scott Lahteine	ca55f2927a	Pulldown pin mode support (#9701) Implemented for LPC1768.	7年前
Scott Lahteine	79272f98fc	Proposed changes to ST7920 lightweight status screen	7年前
Marcio Teixeira	24eb275b99	Added a light-weight status screen for the ST7920 - The status screen uses the ST7920 character generator to greatly reduce SPI traffic and MCU load when updating the status screen. - Has been tested with the RepRapDiscount Full Graphics Smart Controller but should work with any LCD that uses an ST7920 or fully compatible controller.	7年前
Scott Lahteine	08d685c97a	Followup to 21e60fd	7年前
Roxy-3D	21e60fd3ed	Allow user to control Z-Height correction for off mesh movements (#9661)	7年前
Marcio Teixeira	4880ac6533	Added a light-weight status screen for the ST7920 - The status screen uses the ST7920 character generator to greatly reduce SPI traffic and MCU load when updating the status screen. - Has been tested with the RepRapDiscount Full Graphics Smart Controller but should work with any LCD that uses an ST7920 or fully compatible controller.	7年前
Scott Lahteine	2ec65051fd	Fix serial comment sp.	7年前
Scott Lahteine	2014d38e10	NEOPIXEL_BRIGHTNESS parity	7年前
Scott Lahteine	b5e92f4f90	[2.0.x] Enable / disable PSU automatically (#9503)	7年前
Scott Lahteine	16739264d3	Add UltiController v2.1 support Add compatibility with the original screen bord from Ultimaker 2 printer (UltiController v2.1 with the PG-2864ALBP I2C display)	7年前
Scott Lahteine	4925f60cff	Add MALYAN_LCD to configs	7年前
Scott Lahteine	7d6c009104	Add thermistor 15 tuned for JGAurora A5	7年前
Scott Lahteine	348b454401	Probe bounds based on bed size	7年前
Scott Lahteine	58ed9901d7	Consistent NEOPIXEL_TYPE options	7年前
Scott Lahteine	fa432508b0	Followup to Ender config	7年前
Scott Lahteine	048486390e	Bring some configs up to date	7年前
Thomas Moore	f7efac57b7	Multi-host support	7年前
GMagician	5295b4713d	[2.0.x] add semitec 104NT-4 (#9119) Table is very very similar to old 104-GT2 so I added only the name and recycled old ID	7年前
Scott Lahteine	0b4a46fa6c	Bring configs up to date with 1.1.x	7年前
Thomas Moore	f0a8a1a853	[2.0.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE (#8866) * Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE	7年前
Scott Lahteine	28fc8741d6	Reduce default jerk. XY by half. Z by 1/4	7年前
Even	ea1a8d1223	add original RADDS LCD + Controller adds setup for the original Radds Display+Controller+SD Card Reader PCB http://doku.radds.org/dokumentation/lcd-display/	7年前
Dan Delaney	b055d8c39c	[2.0.x] Adding support for using the MKS_12864OLED with the SSD1306 controller (#8814) * Adding support for using the MKS_12864OLED with the SSD1306 controller * Update comment for correct controller type	7年前
Scott Lahteine	15d05748df	Adding support for the Tronxy and Zonestar LCD	7年前
Scott Lahteine	69d49a2438	Shorter segments may be better	7年前
Scott Lahteine	ae663a4198	PROBE_DOUBLE_TOUCH => MULTIPLE_PROBING	7年前
Richard Wackerbarth	c1184552ac	Change K1 to required option PID_K1	7年前
Scott Lahteine	aa7efb96bf	Bring configurations up to date	7年前
Scott Lahteine	0154e3480c	New feature: BED_SKEW_CORRECTION	7年前
Scott Lahteine	ef2531558c	Add an option to segment leveled moves	7年前
Scott Lahteine	5926c9c97b	Followup for MESH_EDIT_GFX_OVERLAY	7年前
Scott Lahteine	5ce7f23afa	Config option G26_MESH_VALIDATION for all meshes	7年前
Scott Lahteine	3f0a982b8c	Move Filament Width Sensor to Configuration_adv.h	7年前
Scott Lahteine	b76e173205	Move test extrusion options under G26	7年前
Scott Lahteine	81b91b3f9d	Clean up some trailing white-space	7年前
Roxy-3D	967104e1ce	Default Extrusion Settings were off a few lines in some of the example config files. (#8333)	7年前
Roxy-3D	ed62c621d7	Fix G26 Circle Drawing. Add Default Extrusion Settings (#8313) - Fix G26 Circle Drawing. - Add default extrusion settings so machine can print lines on print bed - Yet to be done: Get LCD Menu's to use these settings.	7年前
Scott Lahteine	2c099fd4c2	Update Thermal Protection Documentation	7年前
Scott Lahteine	93ba72ea83	Add SERIAL_PORT -1, set on SBASE, STM32F103RET6	7年前
Scott Lahteine	7e43dd1d23	Fix probes configuration url Based on #8241 by @machaj	7年前
android444	9cc1d8e312	[2.0.x] Support for SilverGate Board	7年前

最初前ページ 1 2 3 4 5 ... 次ページ最後

832 コミット (d1dc863962f94a09bd8443657b559ade1a2f5614)