Makes the lib compatible with most LCDs

Font size 6x10 with feedrate symbol & Font size 6x9.

https://code.google.com/p/u8glib/
Universal Graphics Library for 8 Bit Embedded Systems

Adding Maker's Tool Works heated bed thermistor

Sorry for that. This does not lead to compile errors. I removed the
unwanted code to make it clean.

Fix step rate bug (especially for retraction)

These definition contain also the definition for the graphics LCD.

Definition for the graphic LCD are already in it, they will not harm the
configuration as they are only defined constants

Add STB board support to Marlin (next step towards graphic LCD implementation)

Fix step rate bug (especially for retraction)

Generated with createTemperatureLookup.py. The old table crapped out at
270C, which was a problem for polycarbonate.

These definition contain also the definition for the graphics LCD.

Definition for the graphic LCD are already in it, they will not harm the
configuration as they are only defined constants

Marlin with ATmega1284p sanguino support under Arduino 023

This change allows fan outputs to automatically turn on/off when the
associated nozzle temperature of an extruder is above/below a threshold
temperature.
Multiple extruders can be assigned to the same pin in which case the fan
will turn on when any selected extruder is above the threshold.
It also makes the M42 command compatible with the M106/M107 command.
The majority of the logic in this change will be evaluated by the
compiler at build time (i.e, low code space requirements).

Added the optiboot bootloader, uses only 512kB of FLASH
Includes .hex file is for 20MHz µC Clock and serial speed of 57k6

This is the actual Sanguino release for Arduino 023.
It has full ATmega1284p support.

Reference:
https://code.google.com/p/sanguino/downloads/detail?name=Sanguino-0023r4.zip&can=2&q=

ATmega644P 16MHz, ATmega1284p 8, 16, 20MHz

Hotend offset handling for multi-extruder machines

Conflicts:
	Marlin/language.h
	Marlin/thermistortables.h

Marlin v1, alignment of the Italian language

Update Marlin/language.h

Update Polish language 	#define MSG_RESUMING "Wznawiam drukowanie"

Add SD-Card change and SD-Card init. for electronics equipped with LCD Display

Update Marlin/ultralcd_implementation_hitachi_HD44780.h

Fix to a bug that I just introduced - sorry. Forgot about offset of string length.

Add SD-Card change and SD-Card init. for reprap electronics without
SD-Chard change detect pin.

Update Marlin/ultralcd_implementation_hitachi_HD44780.h

Use all available characters in narrow LCDs < 20 characters.

Fix to a minor bug with hardcoded LCD_WIDTH that draws edited values outside of the 16 characters width LCDs.

The extruder offset can be specified in the configuration
file or adjusted on the fly using the "M218 T# X# Y#" command.
The EEPROM support is not yet merged in.
The "T#" command can take option "F#" that specifies the feedrate
at which the printing head should be re-positioned. If not
specified the re-positioning move is not preformed immediately,
but the coordinates are adjusted for the printer to properly
position the head when the next movement happens.

Also skip .files and _files with long filenames. I think its better than before. If somebody dislikes it, or wants additional configuration, it can be done in a future step. Thanks, Marius, and nice to have you helping!