marlin

Commit graph

Autor	SHA1	Nachricht	Datum
wurstnase	c85a486445	make the dual z-endstop optional (PR#2277) it's disabled by default	vor 10 Jahren
CONSULitAS	3a5963c0e7	Configuration_adv.h: Add FAN_MIN_PWM for slow fan stopping issue … * all Configuration_adv.h: Add #define FAN_MIN_PWM for slow fan stopping issue * for K8200: uncommented with tested (and working) values	vor 10 Jahren
Christian Bohn	258bcdefe0	move dogm font selection to configuration_adv.h	vor 10 Jahren
AnHardt	7750180c93	transpire -> expire Minor wording correction.	vor 10 Jahren
Scott Lahteine	0f2c9bacfd	M33 LONG_FILENAME_HOST_SUPPORT	vor 10 Jahren
Scott Lahteine	76438195f0	NO_TIMEOUTS and ADVANCED_OK off by default	vor 10 Jahren
Scott Lahteine	d693e0f378	Use WATCH_TEMP_INCREASE + TEMP_HYSTERESIS + 1 as difference limit	vor 10 Jahren
Scott Lahteine	429c6ccad2	Neaten config formatting	vor 10 Jahren
Wurstnase	526ad82d20	activate advanced_ok and no_timeout	vor 10 Jahren
Scott Lahteine	2445ae3d3a	Combine thermal runaway and watch-period - Make thermal protection for all hotends and/or bed into simple switches - Now enable `WATCH_TEMP_PERIOD` when `THERMAL_PROTECTION_HOTENDS` is enabled - Move detailed thermal parameters to `Configuration_adv.h` - Add sanity checks to warn about old configurations - Change `WATCH_TEMP_PERIOD` to seconds instead of milliseconds	vor 10 Jahren
Scott Lahteine	79106638a8	Fix documentation of heating sanity check	vor 10 Jahren
Scott Lahteine	6110494a56	Change default to 4°C in 16s	vor 10 Jahren
Scott Lahteine	54deb9eea3	Enable WATCH_TEMP_PERIOD by default	vor 10 Jahren
Scott Lahteine	deedb00c18	Document WATCH_TEMP_PERIOD	vor 10 Jahren
Scott Lahteine	5b248757c7	Level Bed in Prepare submenu - Add “Level Bed” menu item for auto bed leveling - Hide the option if homing has not been done yet - Arrange the Prepare submenu more logically (?) - Add documentation comments, some white-space - Apply some coding standards here and there - Move old encoder multiplier debug option to `ultralcd.cpp`	vor 10 Jahren
Steve Kelly	98ca46006c	Allow Y to home before X with option in Configuration_adv.h. This addresses comments in #1956 and #1079. In particular, this is useful when both endstops are stationary on a CoreXY system, and the Y axis needs to be homed before the X so the flags are aligned.	vor 10 Jahren
Scott Lahteine	0fca084ea6	Make EEPROM reproducible in GCode With these changes the output of `M503 S0` is all you need to restore the EEPROM. Building on this it is straightforward to save and restore the EEPROM state using the SD card or external GCode file. - Added `M145` to set “heatup states” for the LCD menu - Added `M420` to toggle Mesh Bed Leveling - Added `M421` to set a single Mesh coordinate - Extended `Config_PrintSettings` with added M codes - Cleaned up some comments here and there	vor 10 Jahren
Scott Lahteine	7d2c2f1790	Updates for the configurator - Sections in all `Configuration_adv.h` - Recognize JAPANESE/WESTERN/CYRILLIC options - Better capturing of comments for tooltips	vor 10 Jahren
Scott Lahteine	0e8182bbf2	Additional pin tests, cleanup	vor 10 Jahren
Scott Lahteine	82794fa5f7	Add delta generic not renaming	vor 10 Jahren
Scott Lahteine	ba2c7cb467	Update configs with all the latest	vor 10 Jahren
Scott Lahteine	2c9bd15625	Move LCD items to `Conditionals.h` - `Conditionals.h` is included twice, setting LCD values the first time	vor 10 Jahren
Scott Lahteine	b6d381f863	Divide up Conditionals to get LCD items early	vor 10 Jahren
Scott Lahteine	670006b919	Remove invariant code from Configurations - Add `Conditionals.h` with calculated configuration values - Add `SanityCheck.h` with checks for configuration errors - Remove equivalent code from all configurations - Move error checks from some sources to `SanityCheck.h` also - Fix initialization of count_direction in stepper.cpp	vor 10 Jahren
maverikou	e93eb3e8d3	Update test	vor 10 Jahren
maverikou	39d255608d	Test an extra delta configuration with auto bed leveling code paths	vor 10 Jahren
maverikou	7c24b97958	Ported over Johann Rocholl's improvements for delta printers: - Nonlinear auto bed leveling code (includes G29, G30, Z_RAISE_AFTER_PROBING). Cleaned it up to be a delta-specific AUTO_BED_LEVELING_GRID code path. - Allen key z-probe deployment and retraction code. Cleaned it up and added safety checks.	vor 10 Jahren
Scott Lahteine	27ac3e985d	Add options to example_configurations	vor 10 Jahren
AnHardt	c246026bda	Sorry.	vor 10 Jahren
Natealus	697ee2dc50	Compiling errors with 4 Extruders defined Here were a few changes that I had to make/add lines for the 4th hotend. A compiling problem in the Temperature.cpp and missing lines in configuration.h and configuration_adv.h. I added these lines in all of the example configs too.	vor 10 Jahren
Scott Lahteine	3a9a3e5ed8	Fix Issue #1356 – remove EXTRUDER1_Z_OFFSET This define is not used.	vor 10 Jahren
alexborro	3afe66bb0c	Fix issues #1248, #1240 - Fixed issue when BAL area probing is shorter than it should be for grid probing - Warning when BAL activated with Delta Kinematics - Fix XY_TRAVEL_SPEED when homing Z axis	vor 10 Jahren
Scott Lahteine	2f467e2797	LCD Progress Bar	vor 10 Jahren
Scott Lahteine	07c6b5ab71	Using axis constants	vor 10 Jahren
alexborro	ab355a90d3	Revert "SD Sort and Buffer"	vor 10 Jahren
Scott Lahteine	29e854c535	Disable SDCARD_SORT_ALPHA by default For legacy boards it’s better if this option is disabled.	vor 10 Jahren
Scott Lahteine	6599adc184	Polish up a little...	vor 10 Jahren
Scott Lahteine	485ca10bc3	Disable SDCARD_SORT_ALPHA by default For legacy boards it’s better if this option is disabled.	vor 10 Jahren
Scott Lahteine	599530902d	Polish up a little...	vor 10 Jahren
Scott Lahteine	5714f64927	get latest Marlin_v1 changes	vor 10 Jahren
David	377dfb182f	Updated example configurations for Delta printers	vor 10 Jahren
Jim Morris	af9395ac2e	Add M605 to dynamically set delta configuration Save above configs in eeprom fix docs in createTemperatureLookupMarlin.py add missing azteegX3pro digipot settings in delta example config	vor 11 Jahren
Joseivaldo Benito Junior	8e48e24c7f	Update Delta example files Signed-off-by: Joseivaldo Benito Junior <jrbenito@benito.qsl.br>	vor 11 Jahren
Nicolas Rossi	b0c8120fcc	Added feedrate setting in exemple config for manual moves from panel	vor 12 Jahren
Jim Morris	52f79ffeca	add an example default configuration for delta style bots	vor 12 Jahren
Robert F-C	c3568398b5	Disable DUAL_X_CARRIAGE by default	vor 12 Jahren
Robert F-C	39cd3dbdbe	Remove dual x-carriage functionality that could/should be implemented in slicer Also added a couple of missed merge lines in homeaxis() from previous commit.	vor 12 Jahren
Jim Morris	d01ee7e7b5	fix zjerk being the same for delta as xy jerk add more delta defaults on delta make second home even slower	vor 12 Jahren
Robert F-C	d7390e13d9	Support dual x-carriage printers Dual x-carriage designs offer some substantial improvements for dual extruder printing.	vor 12 Jahren
Jim Morris	460751503e	Added default configurations for deltas when DELTA is defined	vor 12 Jahren

32 Commits (dc40a5f6e004a13a334584a4be17bc5ce67b9170)