715 커밋 (dd22cbbfb81c20ab1b21f53dfd1865a58d257fd1)

작성자 SHA1 메시지 날짜
  Scott Lahteine 9f48798ffd Replace ENABLED with DEFINED for SERVO_ENDSTOPS (PR#2542) 10 년 전
  Richard Wackerbarth ae00fad75b Rename as M100 10 년 전
  Richard Wackerbarth a401d738df There is an echo in here 10 년 전
  Richard Wackerbarth ed7d45e8f5 Memory watcher 10 년 전
  Scott Lahteine bea6739774 Don't include Z_RAISE_AFTER_PROBING if not used (PR#2527) 10 년 전
  Scott Lahteine e4c01f1c7e Simplify init with ARRAY_BY_EXTRUDERS1 macro (PR#2507) 10 년 전
  Scott Lahteine e2957df05c Shorthand for do_blocking_move_to 10 년 전
  Scott Lahteine 819c5b9b50 Adjust comment on Z adjustment 10 년 전
  Scott Lahteine 5a7356b6fc Patch for G29 final Z position 10 년 전
  AnHardt 088e09e052 Add forgotten Marlin_main.cpp 10 년 전
  Scott Lahteine b116c096bd Reduce set_homing_bump_feedrate, save 42 bytes (PR#2512) 10 년 전
  Scott Lahteine 469843427d Reduce code in gcode_M81 (PR#2497) 10 년 전
  Scott Lahteine c66955aaf9 Mark unchanging arrays as const (PR#2494) 10 년 전
  Scott Lahteine 278aa15301 Add COUNT macro and apply 10 년 전
  Scott Lahteine aac2b9aa9d Reduce code in gcode_M84 (PR#2492) 10 년 전
  Scott Lahteine e83eac312e Move plan_arc next to prepare_move 10 년 전
  Scott Lahteine 5c5936508d G2/G3 Arcs for Delta 10 년 전
  Scott Lahteine 3b23ccd366 Patch servos code for move 10 년 전
  Patrick Bogen fba4e6241b Specify print format for reporting invalid tmp_extruder (PR#2465) 10 년 전
  AnHardt d15d869267 Rename axis_is_at_home() to set_axis_is_at_home() (PR#2464) 10 년 전
  Scott Lahteine f209b755a5 Move the Z probe as far as needed to trigger the switch (PR#2461) 10 년 전
  Scott Lahteine 0f1df62389 Fixup comments in code_seen 10 년 전
  Scott Lahteine 2945eb6650 Call code_seen only once per parameter 10 년 전
  Scott Lahteine db23b9b184 Minor tweak to M204 code (PR#2457) 10 년 전
  Scott Lahteine 81d42406b7 Move braces in homeaxis to prevent a hanging else (PR#2451) 10 년 전
  AnHardt ed6598adf5 Corrected Bed Height vs. Bed Topology for verbosity > 3 10 년 전
  brian 62302ceb9e Add calculation of difference between auto-correct bed level plane, and measured topo map. 10 년 전
  AnHardt 49609f6c14 Activate the new servo.move() function 10 년 전
  Scott Lahteine 87a872e103 Use st_get_position_mm where possible (PR#2411) 10 년 전
  Scott Lahteine 2e0da8abdc Allow N to take a negative argument (PR@2402) 10 년 전
  Scott Lahteine 447dbd6fa5 Add STEPPER_RESET_PIN support 10 년 전
  Scott Lahteine 6b1b8cb2b3 Also nullify spaces before the checksum asterisk (PR#2409) 10 년 전
  Scott Lahteine 4e9d658141 Prevent a hanging SERIAL_ECHO_START in M111 10 년 전
  Scott Lahteine 6b494c1535 Use disable_all_heaters in M111 10 년 전
  Scott Lahteine 15190d40df Add extra EOL after M111 10 년 전
  AnHardt d421f5250d Correct the sign of zprobe_zoffset for G29 (PR#@391) 10 년 전
  Scott Lahteine 52fcc743ab Replace "target" with "destination" in M600 (PR#2374) 10 년 전
  AnHardt 23c8c5348f Z-height fix V2b (PR#2351) 10 년 전
  Todd Swindoll a111fbbd0a z-probe offset fix (PR#2361) 10 년 전
  Scott Lahteine 9682ed455e Fix comment on M83, add comment to prepare_move 10 년 전
  AnHardt 36746143a1 Correct output of M48 (PR#2336) 10 년 전
  Scott Lahteine f6ca5a8da8 Allow "M110 N123" without a checksum 10 년 전
  Scott Lahteine aaad65ff5d Include a comment documenting M110 10 년 전
  Scott Lahteine 862c72b030 Put the mandatory test of gcode_N first 10 년 전
  Scott Lahteine 30976f9773 Allow M110 to handle a second N argument 10 년 전
  Scott Lahteine 5ccb1c9e7d Use millis for M600 audio feedback interval 10 년 전
  Scott Lahteine fb16a83b8a Cleanup M600 documentation comments 10 년 전
  Scott Lahteine 97ec224d72 Replace target with destination in M600 10 년 전
  Scott Lahteine 4ce9ddbb74 Check the temperature before filament change 10 년 전
  AnHardt 722829b058 Move buzzing code to buzzr.h & buzzer.cpp (PR#2307) 10 년 전