marlin

Commit graph

Autor	SHA1	Nachricht	Datum
Scott Lahteine	af32a7d5d6	M120/M121 also set endstops non-homing state	vor 9 Jahren
Scott Lahteine	04fa9d4f47	Make Autotune options into Menu Edit Items	vor 9 Jahren
WPBack	e3f583a3be	Fixes for PID AutoTune from menu Fixes for #3189 Setting a temp is still missing	vor 9 Jahren
WPBack	3b3e8a02b5	Initial implementation of PID Autotune Menu Items Adds the parameter U to M303. If U1 is included , it will use the PID-values from the auto-tune.	vor 9 Jahren
AnHardt	1c6a16d5bb	Send position updates to RH Send position updates to RH where RH can not know the end position. For example after G28 RepetierHost assumes to be at the homing-point, but with a servo probe we are much higher. Now the RH-software-endstops will prevent us from going down (if activated). With this patch the internal position of RH is updated with `current_position[]`.	vor 9 Jahren
AnHardt	6486e8b74a	Call buzz() directly from M428	vor 9 Jahren
Scott Lahteine	b1a3a95ad4	Tweak controllerFan to save a cycle or two	vor 9 Jahren
AnHardt	338b69c24b	Fix extrudernum in MSG_INVALID_EXTRUDER SERIAL_ECHO is not very good in printing uint8_t - so cast. to int.	vor 9 Jahren
AnHardt	b39b54031b	Fix KEEPALIVE_STATE Add return to NOT_BUSY for M105 Replace WAIT_FOR_USER with PAUSED_FOR_USER Add Travis test for FILAMENTCHANGEENABLE	vor 9 Jahren
Scott Lahteine	41145e6e81	Patch drain_queued_commands_P Fix a SNAFU that should have been caught in #3012	vor 9 Jahren
Scott Lahteine	59483221d5	Move stepper DAC to a separate file	vor 9 Jahren
Scott Lahteine	5d0570cea0	Make digitalPotWrite depend on HAS_DIGIPOTSS	vor 9 Jahren
Scott Lahteine	f96bc03081	Add M907-M910 g-codes support for Printrbot Rev. F	vor 9 Jahren
Scott Lahteine	cf7c444aff	Apply unknown_position_error elsewhere	vor 9 Jahren
Scott Lahteine	eda5190581	Check for known position in `M48`	vor 9 Jahren
Scott Lahteine	68085ca855	Updated M48 friendly for DELTA Partial implementation with reference to MarlinFirmware/Marlin#3011	vor 9 Jahren
Scott Lahteine	38b0082bf2	Additional tweaks to M42 exit conditions	vor 9 Jahren
Scott Lahteine	4bbea5124d	Support for multiple PWM fans	vor 9 Jahren
Scott Lahteine	637cc03686	Fix M109 so it won't wait for cooling Addressing issue #2767	vor 9 Jahren
AnHardt	3f45a1acf9	Check probes only when deployed Aim: Test probes in update_endstops only when activated Changes: Configurations Add define for FIX_MOUNTED_PROBE to handle the situation where formerly ENDSTOPS_ONLY_FOR_HOMING had to be set, or lowering the nozzle below Z_PROBE_OFFSET_FROM_EXTRUDER could give an "endstop hit" message. Add define for Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN to indicate a common situation, that we have a probe but it is connected to an endstop pin Add some comments Shift some entries to have related things together. Conditionals.h We have a probe (HAS_Z_MIN_PROBE) if one of the pins is defined AND one of the probes is defined. SanityCheck.h Add some tests if the probe is connected and if we have defined a probe. stepper.cpp Changes to test the probe only when it is deployed (z_probe_is_active). Test update_endstops() when the probe is deployed. MarlinMain.cpp a. set and reset z_probe_is_active in deploy_z_probe(), stow_z_probe() and dock_sled() b. set and reset z_probe_is_active in the case a z-servo is moved to a defined position. The only remaining unhandled servo move is in M280 where we do not end in a defined position. If you want to handle a probe use M401/402 c. skip deploying/stowing when already deployed/stowed in the dedicated deploy/stow functions. d. Handle the new FIX_MOUNTED_PROBE in parallel to a servo driven probe/endstop. To do: In another PR. handle all probes in deploy/stow_z_probe. Sort out SERVO_LEVELING vs. HAS_SERVO_ENDSTOPS.	vor 9 Jahren
Scott Lahteine	963a92ceda	Patch idle forevermore	vor 9 Jahren
Scott Lahteine	7ec7bb31c4	Send a Busy signal to hosts during long processes, wait for input, etc If Marlin is blocking the serial input or command queue for any length of time (for example more than 2 seconds), it needs to send a message to serial out to inform the host that it is busy. Marlin should only send these messages out when busy, and preferably not when trying to print formatted output.	vor 9 Jahren
Scott Lahteine	80277cc9c8	drain_queued_commands_P now returns true if there are more	vor 9 Jahren
Scott Lahteine	8fe7420310	Use a separate serial line buffer	vor 9 Jahren
Edward Patel	cb0dbfa3b5	Fix for #3160 MESH_BED_LEVELING broke correct G1 movement in Z	vor 9 Jahren
Scott Lahteine	6e1bc03d3b	Additional wrapping for #3140	vor 9 Jahren
esenapaj	a4314c4907	Use local variable in recalc_delta_settings() diagonal_rod hadn't been used anywhere.	vor 9 Jahren
esenapaj	8de7a6f9b1	suppress warnings	vor 9 Jahren
Scott Lahteine	4b648793f2	Use ENABLED with DISABLE_[INACTIVE_][XYZ]	vor 9 Jahren
Scott Lahteine	f9ded2a7c4	Wrap macros to prevent bad expansions	vor 9 Jahren
jbrazio	a645860431	All print timer related activity now uses print_job_start(), print_job_timer() or print_job_stop()	vor 9 Jahren
jbrazio	1981e53d68	M109 R option if misused could cause a wait-forever situation	vor 9 Jahren
João Brázio	4d4a842cfb	Update the bed topography output done by G29	vor 9 Jahren
João Brázio	793cd0ae3b	Clean up the code a bit	vor 9 Jahren
jbrazio	986b508ff7	Print timer now stops when it sees the last extruder temperature being shutdown	vor 9 Jahren
AnHardt	fd5414c6ea	Z_RAISE_BEFORE_HOMING -> MIN_Z_HEIGHT_FOR_HOMING rebased corrected spelling changed to #elif for error Still with MIN_Z_HEIGHT_FOR_HOMING but con be done with (folder wide) search-replace when we have a better name.	vor 9 Jahren
Scott Lahteine	302d1bfbc4	Drop obsolete test for leading "N"	vor 9 Jahren
AnHardt	37b857e8ec	M110 ang M29 rework Add 'ok' output for G29 actually closing the file. Handle M110 when received without linenumber/checksumm.	vor 9 Jahren
jbrazio	642e3699ce	Z-axis was being lift multiple times if Z_SAFE_HOMING was enabled and Z_RAISE_BEFORE_HOMING was greater than zero	vor 9 Jahren
Scott Lahteine	ef68c1910c	Check that the temperature is close to target	vor 9 Jahren
Scott Lahteine	ea9fd1200b	Fix M109 so it won't wait for cooling Addressing issue #2767	vor 9 Jahren
Scott Lahteine	ff13070b59	Use _BV macros, patch up others	vor 9 Jahren
Scott Lahteine	209f5f21e0	Use macros where possible Apply `constrain`, `NOMORE`, `NOLESS` and `CRITICAL_SECTION` macros wherever possible.	vor 9 Jahren
Scott Lahteine	3a3d358df9	Fix Printrboard with LCD (redo) Based on #2860 - rebased for RCBugFix	vor 9 Jahren
lrpirlet	0fb507a75d	correct raise_z_for_servo	vor 9 Jahren
Blue-Marlin	b4e5e0f11d	Add Watchdog reset in kill() Add watchdog reset in the kill loop to simplify recovering.	vor 9 Jahren
jbrazio	67e15aac3d	As pointed out by @Blue-Marlin the previous code would raise the Z axis twice for a servo based probe.	vor 9 Jahren
jbrazio	17cc2a9663	Z_RAISE_AFTER_PROBING value was being ignored by Marlin because raise_z_after_probing() was only called if the printer type was set to a DELTA or if the printer had a docking sled for the probe.	vor 9 Jahren
AnHardt	1c889cd303	Refresh previous_cmd_ms during run_z_probe() Refresh previous_cmd_ms during run_z_probe() to prevent: stepper shutdown for expired DEFAULT_STEPPER_DEACTIVE_TIME and extrudes for expired EXTRUDER_RUNOUT_SECONDS (https://github.com/MarlinFirmware/MarlinDev/issues/238)	vor 9 Jahren
AnHardt	4b02f33e69	Distribute config-changes to the other configurations	vor 9 Jahren

Erste Vorherige ... 3 4 5 6 7 ... Nächste Letzte

898 Commits (e48d0263bf00146e7a51946a20a45fa7e6dbbefc)