marlin

Commit Graph

작성자	SHA1	메시지	날짜
Scott Lahteine	5714f64927	get latest Marlin_v1 changes	10 년 전
Scott Lahteine	f989bd5435	Simple code cleanup. Rename "homeing" to homing.	11 년 전
Javi	40ba644bb4	Added profile for RAMPS with 2 extruders and 1 fan. modified: Marlin/Configuration.h modified: Marlin/pins.h	11 년 전
Filip Mulier	85649a4549	Real-time filament diameter measurement and control This feature allows the printer to read the filament diameter automatically and adjust the printer in real time. Added code to read an analog voltage that represents a filament diameter measurement. This measurement is delayed in a ring buffer to compensate for sensors that are a distance away from the extruder. The measurement is used to adjust the volumetric_multiplier for the extruder. Some additional g codes (M404, M405, M406, M407) are used to set parameters and turn on/off the control. g code M221 is updated. Pins for RAMPS1.4, RAMBO, and Printrboard are identified for analog input. The configuration file is updated with relevant user parameters.	11 년 전
Grogyan	bcd039aa81	Update pins.h	11 년 전
bonm014	32a6451ad8	Add leapfrog and dual Y/Z I have added the pin set for the leapfrog and the support of dual Y and Z	11 년 전
bonm014	f244045245	Update pins.h Leapfrog board added to the pin list	11 년 전
David Forrest	09b84faa00	Configuration.h, pins.h: Add MOTHERBOARD 84 for Teensy++2.0	11 년 전
Cameron Lai	105bebb466	Fix for pin mapping for SDSS pin and Fan pin, so Arduino library can be used	11 년 전
Cameron Lai	97ead2eccb	Fix for microstepping pin mapping, not using Teensy pin mapping, but Arduino's default pin mapping so Arduino library can be used	11 년 전
Cameron Lai	2fa514e88a	Add port for 5DPrint D8 Driver board	11 년 전
nothinman	dfb98101e4	Change CONTROLLERFAN_PIN for board 35 to -1, as it would conflict with board's 33 extruder pin, causing burnout (it's the same board, just different number of fans/extruders, therefore should be pin-compatible)	11 년 전
Ralf Schultz	eecda434fb	Sanguinololu servo pins set default disabled	11 년 전
Ralf Schultz	06709ad60e	Added servo pin assignments to Sanguinololu	11 년 전
Peter	c9c83a4560	Updated gen3+ board pins names to current convention	11 년 전
daid	d16a770855	Ultimainboard 2.x does not has a PS_ON pin.	11 년 전
Jim Morris	5097c57d3a	Added pins for Azteeg X3 Pro under motherboard 68	11 년 전
Jim Morris	b819fc53ca	Add Azteeg X3 Pro as motherboard 68 Add digipot i2c control for MCP4451 Allow M907 to set i2c digipot currents in amps Fix Makefile to allow Azteeg motherboards Fix Makefile to allow Wire libraries only Add beeper pin for Azteeg X3 Pro	11 년 전
Ronald	8d162e5bd7	Improved support for panelolu2 encoder and buzzer I added #define for LCD_FEEDBACK_FREQUENCY_HZ and LCD_FEEDBACK_FREQUENCY_DURATION_MS which is used to alter the default buzzer sound. When selecting Panelolu2 in configuration.h: - it automatically sets the correct ENCODER_PULSES_PER_STEP and ENCODER_STEPS_PER_MENU_ITEM. - if LCD_USE_I2C_BUZZER is defined it will also set the default LCD_FEEDBACK_FREQUENCY_HZ and LCD_FEEDBACK_FREQUENCY_DURATION_MS When selecting the sanguinololu 1284p the following is true: - its now enables LARGE_FLASH - It enables the gcode M300 when the panelolu2 LCD_USE_I2C_BUZZER is defined	11 년 전
daid	df194f75e1	Added PT100 support for Ultiboard2	11 년 전
daid	380144c20f	Add Ultiboard2 electronics. With PWM current settings. For the few people that have this new board as experiment in their UM-Original.	11 년 전
-	eed053dffb	Revert "Made numbering of heat bed thermistor more logical as D8 is bed, D9 is Extruder 2 and D10 is Extruder 1, so T0 should be E1, T1 E1 and T2 bed to be sequential as MOSFET-Outputs" This reverts commit b7eadb9f37.	11 년 전
-	b7eadb9f37	Made numbering of heat bed thermistor more logical as D8 is bed, D9 is Extruder 2 and D10 is Extruder 1, so T0 should be E1, T1 E1 and T2 bed to be sequential as MOSFET-Outputs	11 년 전
Michal Dyntar	e8786bf110	Added support for Cheaptronic v1 electronic	11 년 전
Daniel Benamy	cab84e0e5b	Add (correct) missing pin definitions for Y2 I tested this and it works.	11 년 전
fmalpartida	b5a964fcc5	Initial SAV MkI (RepRap CloneWars board) integration. Included support for BT dongle on AT90USB boards. Added LCD Shift Register LCD control Included support for RepRap Clone Wars project board (SAV MKI).	11 년 전
Erik van der Zalm	8a08cca0f2	Added temperature status less. Hopefully fixed viky button handling without braking other boards	11 년 전
phq1910	4f7c6dfe35	Update pins.h Include Pins cpu Sethi 3D	12 년 전
Erik van der Zalm	0dca49a7c0	Added Azteeg X3 board.	12 년 전
Martin Lukasik	acd8619809	Fan fix for Panelolu2+Sanguinololu.	12 년 전
Steve Kelly	53614e5144	add pins for rambo lcd	12 년 전
Guillaume Seguin	f4c3135c6d	Add Panelolu2 pins for RAMPS1.3	12 년 전
Guillaume Seguin	1902d339b0	Add Panelolu2 pins for RAMPS1.3	12 년 전
Michael Mayer	99b7e926e7	added MaKr3d Melzi board	12 년 전
Erik van der Zalm	2015989f84	Added DISABLE_MIN_ENDSTOPS	12 년 전
lajos	02dee80fa5	added Azteeg X1 motherboard	12 년 전
Erik van der Zalm	26a441fc7d	More 3Drag controller patches.	12 년 전
BorisLandoni	4c7d1436e9	Update pins.h	12 년 전
Scott Lahteine	5dabc95409	Apply all changes from latest Marlin_V1 Diffed and merged, preserving my updates	12 년 전
Gord Christmas	a733537ddd	Missed some variable declarations Integrated fixes from henrikbrixandersen pull request #504	12 년 전
Erik van der Zalm	5090c56651	More redundant temp sensor changes. (After testing and debugging by reifsnderb)	12 년 전
Gatulibu	b78fa6bb70	Added support for Megatronics v2.0 and Minitronics v1.0 merged from code downloaded from reprapworld.com	12 년 전
Erik van der Zalm	7231a20dba	Put #ifdef around servo pins in pins.h. This allows the pins to be used for M42.	12 년 전
Bas Spaans	424101110c	Add Panelolu2 support for Melzi	12 년 전
Gord Christmas	dc59f07d24	First attempt at refactoring of original servo code. Only adding servo support as a start to keep things simple.	12 년 전
MaikStohn	9cc15876be	Add support for RUMBA thermocouple add on	12 년 전
Erik van der Zalm	bd2cd4903e	Added #ifdef BARICUDA around the BariCUDA changes	12 년 전
Jordan Miller	fbd899a37d	Support for BariCUDA Paste Extruder derived from MakerBot Frostruder. Using Ultimachine RAMBo board. M126/M127 and M128/M129.	12 년 전
gregor	2739c26c4f	changes: - changed the variables from keypad to reprapworld_keypad - added a missing ifdef check	12 년 전
gregor	6fb9573157	added support for the reprapworld keypad	12 년 전

처음 이전 1 2 3 4 다음 마지막

151 커밋 (e5a334b83a6c2399f11b920247625cbd2d6eef56)