marlin

Commit-Graf

Upphovsman	SHA1	Meddelande	Datum
Scott Lahteine	e5fd43f343	Implement BABYSTEPPING for COREXY and COREXZ	9 år sedan
Alexander Leisentritt	4338813814	save last extruder and set stepper directions too in case the extruder changed fixes MarlinFirmware/Marlin#3144 and MarlinFirmware/Marlin#3083	9 år sedan
Scott Lahteine	6e1bc03d3b	Additional wrapping for #3140	9 år sedan
Scott Lahteine	0c48eaf3de	Expose motor current in more configs, disable by default	9 år sedan
Elijah Snyder	e8b10d2836	Adding PWM_MOTOR_CURRENT flag to help expose PWM_MOTOR_CURRENTS in Configuration_adv.h similar to DIGIPOT_MOTOR_CURRENT	9 år sedan
Scott Lahteine	3fd31976c3	Reduce code in stepper.cpp with macros	9 år sedan
Scott Lahteine	ff13070b59	Use _BV macros, patch up others	9 år sedan
Scott Lahteine	373e8a1ad4	Fixes for COREXY and COREXZ coordinates	9 år sedan
Naruto-kyun	2932602643	Update stepper.cpp Forgot Z2_MIN_PIN	9 år sedan
Richard Wackerbarth	7a670e3911	Improve planner & stepper PR #263	9 år sedan
Scott Lahteine	644c376e84	Use binary OR with endstop bits	9 år sedan
Scott Lahteine	9bdab4f3a8	Clean up "else" and other spacing	9 år sedan
Scott Lahteine	0c7f7ebcfb	Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting	9 år sedan
Scott Lahteine	9f462f0cf5	Hack to address stuttering caused by ISR not finishing in time (PR #138) When the ISR does not finish in time, the timer will wrap in the computation of the next interrupt time. This hack replaces the correct (past) time with a time not far in the future.	9 år sedan
Christian Lefrançois	a7822e3ff7	Some renaming of Z_PROBE to Z_MIN_PROBE (PR#91) * Fix a couple of renames omission and macro expansion errors.	9 år sedan
Richard Wackerbarth	29b456ae07	Suppress some compiler warnings	9 år sedan
AnHardt	e2d69f66b2	Make Z_PROBE a Z_MIN_PROBE (PR#65) Currently we use the probe exclusively as a device to find the build platform(bed). For the currently supported setups this means, we use it as a additional min-endstop. A triggered when not deployed probe disturbs the homing process for max-endstops. Rename ENDSTOPPULLUP_ZPROBE to ENDSTOPPULLUP_ZMIN_PROBE Rename Z_PROBE_ENDSTOP_INVERTING to Z_MIN_PROBE_ENDSTOP_INVERTING Rename Z_PROBE_ENDSTOP to Z_MIN_PROBE_ENDSTOP Rename DISABLE_Z_PROBE_ENDSTOP to DISABLE_Z_MIN_PROBE_ENDSTOP Rename Z_PROBE_REPEATABILITY_TEST to Z_MIN_PROBE_REPEATABILITY_TEST Rename Z_PROBE_ENDSTOP to Z_MIN_PROBE_ENDSTOP Adjust comments accordingly Remove Z_MAX check for the probe in update_endstops(). Using an delta related idea of @clefranc from #61, extended to the general change for all setups. Tested with Prusa i3, max-z-endstop and permanently triggered z-probe. Worked for @clefranc's delta.	9 år sedan
AnHardt	6a6e863a47	Resolve #2581 by adding a missed ';' (PR#67)	9 år sedan
Scott Lahteine	46453905d6	Apply remaining ENABLED/DISABLED conditionals	9 år sedan
Richard Wackerbarth	4b9d5cd352	Use lowercase names for serial instances	9 år sedan
Scott Lahteine	c35fb88094	Overridable Options - Part 8 (PR#2560) Apply `ENABLED` / `DISABLED` macros to stepper-related files.	10 år sedan
AnHardt	27d7d2ccab	Correct bracketing for COREXY-XZ	10 år sedan
Scott Lahteine	278aa15301	Add COUNT macro and apply	10 år sedan
Scott Lahteine	000a6fce46	Extract update_endstops from stepper ISR (PR#2474)	10 år sedan
Scott Lahteine	9f53e2f0c9	Implement COREXZ in stepper.cpp and planner.cpp	10 år sedan
Richard Wackerbarth	e83575537a	Compiler defines USBCON for USB devices (PR#2433)	10 år sedan
Scott Lahteine	87a872e103	Use st_get_position_mm where possible (PR#2411)	10 år sedan
Scott Lahteine	d135b15bb8	Init all endstop bits to 0 (PR#2332)	10 år sedan
AnHardt	0d9d21d15f	Add a semicolon to make Z_DUAL_STEPPER_DRIVERS compile again.	10 år sedan
wurstnase	0f3f7d6835	clean up double endstops	10 år sedan
Scott Lahteine	d76a01194d	Slight size reduction by adding idle()	10 år sedan
wurstnase	94120740d8	faster compare !(~(ab)&0x3) and ab == 0x3 are equal	10 år sedan
wurstnase	ff98b8632b	new endstop bits	10 år sedan
AnHardt	bc0764894a	Shift call of start_watching_heater() into setTargetHotend() to warrant watching is set or reset. Make setTargetBed() in _lcd_preheat() dependant of TEMP_SENSOR_BED. Use disable_all_heaters() in lcd_cooldown() and abort_on_endstop_hit.	10 år sedan
wurstnase	21ff773832	rework out_bits	10 år sedan
Scott Lahteine	c54a2ea042	Adjust spacing in Marlin_main.cpp and stepper.*	10 år sedan
Scott Lahteine	072625ccad	Update headings in Marlin_main.cpp and stepper.cpp	10 år sedan
Wurstnase	1d5677cc3b	add missing Z-bits	10 år sedan
Wurstnase	df12e68e7d	add missing Z_PROBE-bit	10 år sedan
Wurstnase	b55f32f8a1	replace some bools this PR replaces some bools with one char. this will safe 3 bytes and should also be sometimes a little bit faster.	10 år sedan
Wurstnase	073e4af7e2	We don't need the old standard one. The STEP_ADD and STEP_IF_COUNTER are also good for non-Toshiba stepper driver.	10 år sedan
Wurstnase	79a44a9de3	stepper.cpp macros rework delete some tabs	10 år sedan
Chris Palmer	483384aaa4	Fixed faulty comment merge	10 år sedan
Chris Palmer	cc6b7cf3ce	Fixed some comment spellings.	10 år sedan
Chris Palmer	e4595fa24a	Fixed jump in speed when using high accelerations on axes with lots of steps. I.e., when acceleration * steps per mm > 2,000,000. This was done by changing MultiU24X24toH16 to take a 32b bit operand. Removed the claim that stepper.cpp uses the Leib algorithm.	10 år sedan
Scott Lahteine	53be0f3399	Babystep delay 2us	10 år sedan
Scott Lahteine	7336e6df07	Always define old_z, not always z2	10 år sedan
Scott Lahteine	5dd87d2e74	Enable all old_z_*_endstop vars for Z_DUAL_ENDSTOPS - Potentially addressing #1911	10 år sedan
Scott Lahteine	ccddc280be	Apply three more commits	10 år sedan
Scott Lahteine	8857b9e921	Use the extruder argument in plan_buffer_line	10 år sedan

Första Föregående 1 2 3 4 5 Nästa Sista

209 Incheckningar (e5fd43f343d36e6943528c9f3e12ca88e6564159)